P1A0C on the 2020 Ford Escape
The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.
This code is specific to a manufacturer and is not described here. Its meaning is in the manufacturer's service information.
| 21B68-S1 | 2022-02-24. Service bulletin. In some of the affected vehicles, it may be possible that the TMAP (Temperature Manifold Absolute Pressure) sensor may ice over while driving in cold temperatures for extended periods of time. An iced over TMAP sensor may cause the check engine light to illuminate with diagnostic codes P1A0C, P2282, or P0106 in the PCM (powertrain control module). These codes may lead to the PCM disabling the eninge and a "Stop Safely Now" message appearing in the instrument cluster. |
|---|---|
| 21B68 | 2022-01-03. Service bulletin. Certain 2020-2021 Model Year Escape 2.5L HEV PHEV Vehicles Reprogram Powertrain Control Module (PCM) In some of the affected vehicles, it may be possible that the TMAP (Temperature Manifold Absolute Pressure) sensor may ice over while driving in cold temperatures for extended periods of time. An iced over TMAP sensor may cause the check engine light to illuminate with diagnostic codes P1A0C, P2282, or P0106 in the PCM (powertrain control module). These codes may lead to the PCM disabling the engine and a Stop Safely Now message appearing in the instrument cluster |
| TSB 21-2122 | 2021-05-04. Service bulletin. Some 2020-2021 Escape hybrid electric vehicles (HEV) built on or before 29-Mar-2021 may experience a lack of power, crank/no start, and Stop Safely Now message with diagnostic trouble codes (DTC) P2282, P0106 and/or P1A0C stored in the powertrain control module (PCM) in temperatures below 32’F/0’C. This may be due to various software parameters within the PCM and condensation buildup in the intake manifold. To correct the condition, follow the Service Procedure and reprogram the PCM. |
| TSB 21-2080 | 2021-04-03. Service bulletin. Some 2020 Escape hybrid electric vehicles (HEV) built on or before 4-Dec-2020 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P1A0C stored in the powertrain control module (PCM) and exhibit a Stop Safely Now message in the instrument panel cluster (IPC). This may be due to the software in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM. |
| TSB 20-2365 | 2020-11-05. Service bulletin. Some 2020 Escape Hybrid Electric Vehicles (HEV) built on or before 6-Oct-2020 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P1A0C stored in the powertrain control module (PCM) and exhibit a Stop Safely Now message in the instrument panel cluster (IPC). This may be due to the software in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM. |
| 20B14-S2 | 2020-06-05. Service bulletin. Updated Technical Information for Power Steering Control Module (PSCM) reset after PCM reprogram. Unplugging the PSCM is no longer required as new FDRS service function is available. In some of the affected vehicles, the customer may experience limited powertrain acceleration and speed along with a “Stop Safely Now message and a check engine light displayed in the instrument cluster. Diagnostic Trouble Codes (DTCs) P0340 and P1A0C may be present in the Powertrain Control Module (PCM). This is due to crankshaft and camshaft signal quality during start up, resulting in incorrect synchronization and the inability of the engine to produce the requested torque. SERVICE |
| 20B14-S1 | 2020-06-05. Service bulletin. In some of the affected vehicles, the customer may experience limited powertrain acceleration and speed along with a “Stop Safely Now” message and a check engine light displayed in the instrument cluster. Diagnostic Trouble Codes (DTC’s) P0340 and P1A0C may be present in the Powertrain Control Module (PCM). This is due to crankshaft and camshaft signal quality during start up, resulting in incorrect synchronization and the inability of the engine to produce the requested torque. |
| 20B14 | 2020-05-05. Service bulletin. In some of the affected vehicles, the customer may experience limited powertrain acceleration and speed along with a Stop Safely Now message and a check engine light displayed in the instrument cluster. Diagnostic Trouble Codes (DTCs) P0340 and P1A0C may be present in the Powertrain Control Module (PCM). This is due to crankshaft and camshaft signal quality during start up, resulting in incorrect synchronization and the inability of the engine to produce the requested torque. |
8 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.