WenmarOpen by Wenmar Pro

Service bulletins for the 2026 Ford Bronco

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

31 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Glass, wipers and mirrors are shown. Show all

Bulletins, newest first
SSM 549492026-06-24. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY/WIPER. Some 2024-2026 Bronco vehicles may exhibit a condition where short drop windows, window bounce-back, and/or one-touch open/close does not operate properly. This may be due to loss of window initialization. Replacement or reprogramming of the DDM, PDM, and/or any other components may not resolve these conditions. The short drop windows feature may be restored by performing a reset procedure as described in the Digital Owner's Manual > Windows > Using Short Drop Windows > Resetting Short Drop Windows. If the customer is experiencing an inability to fully close the window due to repeated bounce-back events, the window bounce-back feature may be overridden by performing an override procedure as described in the Digital Owner's Manual > Windows > Window Bounce-Back > Overriding Windows Bounce-Back. The one-touch open/close feature may be restored by performing a reset procedure as described in the Digital Owner's Manual > Windows > Opening and Closing the Windows > Resetting Window One-Touch. These symptoms may return after a successful reset/override
SYNC-26.2.7.6 Bronco2026-04-06. Over-the-air update. VISIBILITY/WIPER; ELECTRICAL SYSTEM. "26S09 Recall Remedy -Update to enable rearview camera image to display when in reverse after infotainment screen thermal shutdown"
SSM 546652026-03-18. Service bulletin. VISIBILITY/WIPER; UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some 2026 F-150/Bronco/Ranger/Mustang Mach-E vehicles may exhibit a blank center display screen after deactivating transport mode. To correct the condition, cycle the ignition from On/Ready to Off. Open, close and lock the door and let the vehicle sit for a minimum of 5 minutes. Reprogramming or replacement of any modules will not correct the condition. If the concern continues, refer to Workshop Manual (WSM), Section 415-00 Information and Entertainment System for normal diagnostics.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.