Over-the-air update SYNC-26.2.7.6 Bronco
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Over-the-air update |
|---|---|
| NHTSA id | 11030740 |
| Published by NHTSA | 2026-04-06 |
| Manufacturer's number | SYNC-26.2.7.6 Bronco |
| Manufacturer's date | 2026-03-27 |
| Campaign id or software version | SYNC-26.2.7.6 |
| NHTSA component | VISIBILITY/WIPER; ELECTRICAL SYSTEM |
NHTSA's summary
"26S09 Recall Remedy -Update to enable rearview camera image to display when in reverse after infotainment screen thermal shutdown"
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system, Glass, wipers and mirrors, Wipers and washers
| FORD BRONCO | 2026 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| SSM 54949 | 2026-06-24. Service bulletin. Some 2024-2026 Bronco vehicles may exhibit a condition where short drop windows, window bounce-back, and/or one-touch open/close does not operate properly. This may be due to loss of window initialization. Replacement or reprogramming of the DDM, PDM, and/or any other components may not resolve these conditions. The short drop windows feature may be restored by performing a reset procedure as described in the Digital Owner's Manual > Windows > Using Short Drop Windows > Resetting Short Drop Windows. If the customer is experiencing an inability to fully close the window due to repeated bounce-back events, the window bounce-back feature may be overridden by performing an override procedure as described in the Digital Owner's Manual > Windows > Window Bounce-Back > Overriding Windows Bounce-Back. The one-touch open/close feature may be restored by performing a reset procedure as described in the Digital Owner's Manual > Windows > Opening and Closing the Windows > Resetting Window One-Touch. These symptoms may return after a successful reset/override |
|---|---|
| SSM 54665 | 2026-03-18. Service bulletin. Some 2026 F-150/Bronco/Ranger/Mustang Mach-E vehicles may exhibit a blank center display screen after deactivating transport mode. To correct the condition, cycle the ignition from On/Ready to Off. Open, close and lock the door and let the vehicle sit for a minimum of 5 minutes. Reprogramming or replacement of any modules will not correct the condition. If the concern continues, refer to Workshop Manual (WSM), Section 415-00 Information and Entertainment System for normal diagnostics. |