WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Dodge Dart

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

160 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Glass, wipers and mirrors are shown. Show all

Bulletins, newest first
90045422024-01-08. Service bulletin. VISIBILITY:WINDSHIELD WIPER/WASHER. Rain Sensor Before replacing the rain sensor during a front windshield replacement inspect the part for part numbers. If you have part numbers; 68507366, 68483780, 68384226 or 68384225, these parts do not utilize a replaceable gel pad, only replace the sensor for a missing or damaged gel pad. For part numbers 68298334, 68298468, 68607452 or 68194700 the gel pad should be replaced during all windshield replacements and can be ordered through MOPAR, complete sensor replacement is not necessary. Contact: FCA Redacted Content for further questions If no response in 15 minutes, proceed with repair.
90045422023-10-30. Service bulletin. VISIBILITY:WINDSHIELD WIPER/WASHER. Rain Sensor Before replacing the rain sensor during a front windshield replacement inspect the part for part numbers. If you have part numbers; 68507366, 68483780, 68384226 or 68384225, these parts do not utilize a replaceable gel pad, only replace the sensor for a missing or damaged gel pad. For part numbers 68298334, 68298468, 68607452 or 68194700 the gel pad should be replaced during all windshield replacements and can be ordered through MOPAR, complete sensor replacement is not necessary. Contact: FCA Redacted Content for further questions If no response in 15 minutes, proceed with repair.
051520292022-10-17. Service bulletin. VISIBILITY/WIPER. Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you.
S1408000259RevA2022-09-26. Service bulletin. LANE DEPARTURE; VISIBILITY. Radio Display Screen Goes Blank During ABS Activation, HVAC Controls And Blind Spot System Operate Intermittently, Cluster Warning Chime Goes Off
31004192022-09-15. Service bulletin. VISIBILITY. Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
90031092022-09-15. Service bulletin. VISIBILITY:WINDSHIELD WIPER/WASHER. Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248) 248-622-6417 if you have questions or need additional information.
90038232022-07-25. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM. Center Stack Lower Vehicle diagnostics have revealed DTC's B10EA & B10E9. If diagnostics lead to HVAC control head replacement, The 2013 part is no longer available. Update to a 2014 HVAC control unit (1TQ77DX9AJ). When using the newer control head, minor circuit modification is required. Follow the steps below; 1. Replace HVAC control with latest 2014 part number. (1TQ77DX9AJ or later version). 2. Replace the 2013 blower power module with a 2014 module (68081871AJ or later version). 3. Remove C229 circuit from Pin 1 of D3827A Blower Control C1 connector. (Pin 1 will no longer have a wire in that cavity). 4. Splice the C229 circuit to blower control circuit C56 in Pin 3 of D3827A connector. 5. Clear Faults and re-test.
31-004-192019-12-16. Service bulletin. VISIBILITY. Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.