WenmarOpen by Wenmar Pro

Service bulletins for the 2012 Dodge Charger

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

219 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Driver assistance are shown. Show all

Bulletins, newest first
90033572024-01-02. Service bulletin. BACK OVER PREVENTION. ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
02-007-142022-08-22. Service bulletin. BACK OVER PREVENTION; SUSPENSION; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC); WHEELS. Front End Clunk Noise When Coming To A Stop - Police Vehicles Only This bulletin involves replacing the left side or the right side or both side tension struts. Police vehicles with heavy duty suspension and rear wheel drive may experience a front end clunk noise, coming from the tension strut bushing(s), while coming to a stop.
02-008-142022-08-22. Service bulletin. SUSPENSION; BACK OVER PREVENTION. Front End Clunk Noise When Coming To A Stop - Mexico Only This bulletin involves replacing both the left and right side front tension struts The customer may experience a front end clunk noise, coming from the tension strut bushing(s), when coming to a stop.
18-031-12 REV. A2022-07-25. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM; SERVICE BRAKES; EXTERIOR LIGHTING. Flash: MIL Illumination P0108 - Manifold Absolute Pressure Sensor Circuit High This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that P0108 - Manifold Absolute Pressure Sensor Circuit High has been set active or stored.Updating the software will correct the condition listed above.
90028272021-03-29. Service bulletin. EXTERIOR LIGHTING; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC). 05064543Z$, 05091385Z$ - RB4 Radio Multi Media (BUX Only)~ Customer complains of inaccurate navigation routing, vehicle indicator drifting from the given route and/or navigation resets. To fix this customer issue, the following must be performed in accordance to TSB 08-004-13:~ 1) Replace radio 05064543ZG or 05091385ZC with P/N 05091462ZE (for non- Russian market) or 05091463ZG (Russian market) respectively.~ 2) Replace the amplifier with the appropriate parts are shown as below:~ Replace 05064981AA-AJ with 05064981AK~ Replace 05064982AA-AL with 05064982AM~ Replace 68040979AA-AE with 68040979AF~ Replace 05064947AA-AK with 05064947AL~ 3) Reflash the HVAC module.~
90025242021-03-29. Service bulletin. ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC); EXTERIOR LIGHTING. 05064947A$, 05064981A$, 05064982A$ - Amplifier (BUX Only)~ Customer complains of inaccurate navigation routing, vehicle indicator drifting from the given route and/or navigation resets. To fix this customer issue, the following must be performed in accordance to TSB 08-004-13:~ 1) Replace radio 05064543ZG or 05091385ZC with P/N 05091462ZE (for non- Russian market) or 05091463ZG (Russian market) respectively.~ 2) Replace the amplifier with the appropriate parts are shown as below:~ Replace 05064981AA-AJ with 05064981AK~ Replace 05064982AA-AL with 05064982AM~ Replace 68040979AA-AE with 68040979AF~ Replace 05064947AA-AK with 05064947AL~ 3) Reflash the HVAC module.~ Please Refer TSB 08-004-13 for additional Informations.~ Issue 2~ 1. In the Network Topology view of wiTECH, determine if the Amplifier is communicating on the CAN bus by noting the color of the amplifier icon. (blue = present, red = not communicating ) ~ 2. Is the Amplifier present (blue) on the CAN bus?~ a. Yes >> This Tech Tip does not apply. Further diagnostics may be required.~ b. No >> Please Reference TSB #08-032-12. This bulletin involved re-flashing the Amplifier with updated software.
90028272021-03-22. Service bulletin. EXTERIOR LIGHTING; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC). Customer complains of inaccurate navigation routing, vehicle indicator drifting from the given route and/or navigation resets. To fix this customer issue, the following must be performed in accordance to TSB 08-004-13:~
90025242021-03-22. Service bulletin. ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC); EXTERIOR LIGHTING. Customer complains of inaccurate navigation routing, vehicle indicator drifting from the given route and/or navigation resets. To fix this customer issue, the following must be performed in accordance to TSB 08-004-13.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.