Service bulletin 9002524
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10189395 |
| Published by NHTSA | 2021-03-29 |
| Manufacturer's number | 9002524 |
| Manufacturer's date | 2013-01-30 |
| NHTSA component | ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC); EXTERIOR LIGHTING |
NHTSA's summary
05064947A$, 05064981A$, 05064982A$ - Amplifier (BUX Only)~ Customer complains of inaccurate navigation routing, vehicle indicator drifting from the given route and/or navigation resets. To fix this customer issue, the following must be performed in accordance to TSB 08-004-13:~ 1) Replace radio 05064543ZG or 05091385ZC with P/N 05091462ZE (for non- Russian market) or 05091463ZG (Russian market) respectively.~ 2) Replace the amplifier with the appropriate parts are shown as below:~ Replace 05064981AA-AJ with 05064981AK~ Replace 05064982AA-AL with 05064982AM~ Replace 68040979AA-AE with 68040979AF~ Replace 05064947AA-AK with 05064947AL~ 3) Reflash the HVAC module.~ Please Refer TSB 08-004-13 for additional Informations.~ Issue 2~ 1. In the Network Topology view of wiTECH, determine if the Amplifier is communicating on the CAN bus by noting the color of the amplifier icon. (blue = present, red = not communicating ) ~ 2. Is the Amplifier present (blue) on the CAN bus?~ a. Yes >> This Tech Tip does not apply. Further diagnostics may be required.~ b. No >> Please Reference TSB #08-032-12. This bulletin involved re-flashing the Amplifier with updated software.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Driver assistance, Lighting
| CHRYSLER 300 | 2012 |
|---|---|
| DODGE CHARGER | 2012 |
| DODGE JOURNEY | 2012 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 15V675000 | 2015-10-19. ELECTRONIC STABILITY CONTROL (ESC); SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP |
|---|---|
| 2014073 | 2014-03-05. Lights And Instruments |
| 14V101000 | 2014-03-04. EXTERIOR LIGHTING:HEADLIGHTS |
| 2012046 | 2012-02-08. Lights And Instruments |
| 12V042000 | 2012-02-07. EXTERIOR LIGHTING:HEADLIGHTS; SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE; ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS; ELECTRICAL SYSTEM:WIRING |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 9003357 | 2024-01-02. Service bulletin. ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA. |
|---|---|
| 0900114 | 2023-01-17. Service bulletin. Hard Contact Knocking Noise In Engine Compartment Primarily While Turning Left |
| 9003735 | 2022-10-31. Service bulletin. Cam Phasers, Oil Control Valve For Malfunction Indicator Light (MIL) issues related to 2012-2017 3.6L Pentastar engines, please note that there is a new diagnostic procedure available in DealerCONNECT for P-codes in relationship to cam phasers. Please use this new information for trouble shooting of cam phasers and oil control valves for MIL on issues. |
| 55111275A | 2022-09-26. Service bulletin. Sun Sensor Multi zone Auto Climate Control systems. Left and right outlet temperatures do not match when system is in "sync" . Occupants will experience being cold ( winter time), on either passenger or driver side, even though the temperature setting is the same. Root cause: Suspect sun senors ( PN 55111274AA and 55111275AA). THERE WILL BE NO DTC FOR THE SUN SENSOR active or stored. The issue is diagnosed by using an INCANDESCENT (not LED) shop lamp. Shine the shop lamp on the left side of the sensor, then on the right side of the sensor, while monitoring sensor output with STARSCAN. The reading should change from 0 (or near zero) to about 20 to 40. The important thing is that the left and right readings are the same, and that they change when the lamp is shone on it. |
| 0805421 | 2022-09-26. Service bulletin. High Beam Headlamps Flicker This bulletin involves installing jumper wires from the Power Distribution Center(PDC) to the headlamp connectors. The technician may find one or more of the following Diagnostic Trouble Codes (DTCs).B1632-15 - Left High Beam Control-Circuit Short To Battery Or Open. B1636-11 - Right High Beam Control-Circuit Short To Ground. In addition the customer may describe the following:High beam headlamps flicker in cold weather. High beams lamps not working properly in cold weather. |
| 0900214REVB | 2022-09-26. Service bulletin. MIL Illumination: P0300, P0302, P0304 or P0306 (X56 Warranty Extension) This bulletin involves checking for excessive cylinder leakage and replacing the cylinder head if necessary. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that any the following Diagnostic Trouble Codes have been set: P0300- Multiple Cylinder Misfire P0302- Cylinder 2 Misfire P0304- Cylinder 4 Misfire P0306- Cylinder 6 Misfire |
| 02-007-14 | 2022-08-22. Service bulletin. Front End Clunk Noise When Coming To A Stop - Police Vehicles Only This bulletin involves replacing the left side or the right side or both side tension struts. Police vehicles with heavy duty suspension and rear wheel drive may experience a front end clunk noise, coming from the tension strut bushing(s), while coming to a stop. |
| 02-008-14 | 2022-08-22. Service bulletin. Front End Clunk Noise When Coming To A Stop - Mexico Only This bulletin involves replacing both the left and right side front tension struts The customer may experience a front end clunk noise, coming from the tension strut bushing(s), when coming to a stop. |
| 24-005-17 | 2022-08-08. Service bulletin. Flash: HVAC Diagnostic and System Improvements This bulletin involves reprogramming the Heating Ventilation Air Conditioning (HVAC) Module with the latest available software. Some customers may notice one of the following:The Defrost button has to be pressed twice to activate the system. The Automatic Temperature Control (ATC)/ Manual Temperature Control (MTC) controller may lose its configuration. This condition can happen when the battery is disconnected or becomes low. This condition could also happen if CAN bus communication was lost. The software was changed to monitor the configuration every two secondsand updated it if the last data saved in memory is different from what is being received on the CAN bus to correct this issue (2011 Only). |
| 18-008-13 | 2022-07-25. Service bulletin. Flash: MIL Illumination P0108 - Manifold Absolute Pressure Sensor Circuit High And Transmission Shift Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. The customer may experience any of the following: 3.6L engine. MIL Illumination for P0108 - Manifold Absolute Pressure Sensor Circuit High affects only 2012 model year vehicles equipped with a 3.6L engine (sales code ERB). 2.4L & 3.6L engines 2.4L & 3.6L engines 2.4L & 3.6L engines 3.6L engine 3.6L engine 3.6L engine 2.4L & 3.6L engines 2.4L engine 2.4L engine 2.4L engine Improves the consistency of how shifts are controlled during upshifts ?torque management?. 3.6L engineUpdating the software will correct the conditions listed above. |