WenmarOpen by Wenmar Pro

Service bulletins for the 2015 Chevrolet Spark

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1402 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
19NA0532020-04-06. Service bulletin. POWER TRAIN. This technical bulletin provides a procedure to replace the trans fluid pressure switch to correct Transmission Operation Concerns or Lack of Performance, MIL Illuminated.
18NA0732020-03-30. Service bulletin. EQUIPMENT; ENGINE. This Bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
16NA1192020-03-30. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This warranty administration bulletin provide policy information to cover GMs policy on performing GM covered vehicle services and maintenance on vehicles originating/sold in Canada.
PIT3099T2020-03-09. Service bulletin. EQUIPMENT. This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians should refer to Service Information for information regarding most accessories. Technicians may also contact PARTECH and/or the Techline Customer Support Center for additional support.
110089002D2020-03-09. Service bulletin. EQUIPMENT. This informational bulletin provides information on GM Accessories ? Dealer-Installed, Repaired or Replaced During Warranty Coverage Period.
050307009I2020-03-09. Service bulletin. WHEELS; EQUIPMENT. This informational bulletin provides retail, wholesale and fleet personnel with General Motors recommendations for customer concerns related to wheel alignment.
20NA0242020-03-09. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. This informational bulletin provides a information and diagnostic steps/tips for vehicles that are slow to heat up in cold temperatures.
20NA0162020-03-09. Service bulletin. EQUIPMENT. This Warranty Administration bulletin provides information on customer vehicles concern results in a manufacturer repurchase from the customer, GM depends on the dealership to host and administer the repurchase closing and intake of the returning vehicle.
18NA3062020-03-02. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This Warranty Administration bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA) (US dealers only).
16NA3832020-03-02. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM. This informational bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
15NA0102020-03-02. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL. This informational bulletin provides information to dealership personnel for new vehicles with less than 1,000 miles that may not pass California smog inspection or smog inspection in other states.
N1922711102020-02-18. Service bulletin. AIR BAGS; EXTERIOR LIGHTING; POWER TRAIN. Special Coverage - On certain vehicles the transmission drive pulleys and internal belt can be damaged if the driver experiences an unexpected harsh shift event. If this occurs, debris may be released inside the transmission, damaging the transmission. Initially, the driver may experience a decrease in drive or shift quality. If not corrected the condition may progress as follows; additional debris inside the transmission, illuminated malfunction indicator light, a reduced power state may be experienced, and a loss of propulsion may occur. Dealers are to replace the transmission. The repairs will be made at no charge to the customer.
PIP4723D2020-02-10. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
PIP5540F2020-02-10. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
PI0592F2020-01-21. Service bulletin. EQUIPMENT. This preliminary information bulletin provides information om Service Programming System (SPS) Error Codes (E4398, E4399, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491 or E6961).
100089009D2019-12-16. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. This informational bulletin provides information on key code security rules and information on GM keycode look-up applications.
080310006G2019-12-16. Service bulletin. EQUIPMENT; TIRES; EQUIPMENT ADAPTIVE/MOBILITY; WHEELS. This technical bulletin provides a procedure on how to clean and resurface aluminum wheel bead seats for vehicles that have the condition of Tire Slowly Goes Flat, Tire Air Loss, Low Tire Pressure Warning Light Illuminated, Aluminum Wheel Bead Seat Corrosion.
080089014F2019-12-16. Service bulletin. EQUIPMENT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).
010842001M2019-12-16. Service bulletin. EQUIPMENT; EXTERIOR LIGHTING; EQUIPMENT ADAPTIVE/MOBILITY. This informational bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Replacement Guidelines.
17NA1652019-12-16. Service bulletin. EQUIPMENT. This informational bulletin provides information on what to do when your clock is inaccurate intermittently .
PIP5312B2019-12-09. Service bulletin. POWER TRAIN. This Preliminary Information communication provides information to the technician about the operation or performance of the CVT7 transmission. When the transmission is at operating temperature torque converter lockup can occur as low as 8 mph and the range for lockup is 8-18mph depending on the throttle angle. The continuously variable transmissions are usually thought of as a no shift transmission however the CVT7 transmission has a high and low range made possible by the use of two clutch packs and one planetary gear set.
PIP5621A2019-12-09. Service bulletin. POWER TRAIN. This Preliminary information communicates to the dealer technician that TAC recommends the utilization of the GDS2 software to aid in diagnosing automatic transmission concerns. TAC is requesting the GDS2 session logs be sent in before the dealer contacts TAC.
PIT3271J2019-12-09. Service bulletin. WHEELS; SERVICE BRAKES, AIR:ANTILOCK. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
PIP5548A2019-12-09. Service bulletin. POWER TRAIN. This Preliminary information communicates to the dealer technician diagnostic tips on inspection of the magnets inside the transmission fluid pan of the CVT7 transmission to aid in determining if the transmission needs to be replaced or not.
PIT5074M2019-12-09. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2. There are 5 terminated leads in a package part number is 13505346, which can be ordered through your normal General Motors Customer Care and Aftersales parts channel.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.