WenmarOpen by Wenmar Pro

Service bulletins for the 2010 Chevrolet Camaro

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1633 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Driver assistance are shown. Show all

Bulletins, newest first
PIC5515C2023-12-11. Service bulletin. BACK OVER PREVENTION. Ratchet Click or Grind Noise In Front Of Vehicle Traveling Straight At Slow Speeds.
PIC5432D2023-12-11. Service bulletin. BACK OVER PREVENTION. Service Stabilitrak Message Displayed At Startup
PIC5432C2023-12-11. Service bulletin. BACK OVER PREVENTION. Service Stabilitrak Message Displayed At Startup
PIC5432B2023-12-11. Service bulletin. BACK OVER PREVENTION. Service Stabilitrak Message Displayed At Startup
PIC5428F2023-12-11. Service bulletin. BACK OVER PREVENTION; WHEELS. EBCM Wheel Speed Sensor Diagnostic Aid for ABS Message
PIC5428E2023-12-11. Service bulletin. BACK OVER PREVENTION; WHEELS. EBCM Wheel Speed Sensor Diagnostic Aid for ABS Message
PIC5428D2023-12-11. Service bulletin. BACK OVER PREVENTION; WHEELS. EBCM Wheel Speed Sensor Diagnostic Aid for ABS Message
PIC5257C2023-12-11. Service bulletin. ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC). Service Stability Message With Code U0710
PIP4964E2023-12-04. Service bulletin. FUEL SYSTEM, GASOLINE; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC); EXTERIOR LIGHTING. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on. Technician will find Diagnostic Trouble Code P2097 or P2099. Technician will need to perform an injector balance or Active Fuel Injector Tester prior to going further. Technician will also need to check for a small leak in the exhaust if published Service Information diagnostics does not lead to a resolution.
070601016G2022-06-13. Service bulletin. BACK OVER PREVENTION. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
PI0938A2018-06-11. Service bulletin. ELECTRICAL SYSTEM; ELECTRONIC STABILITY CONTROL (ESC). This preliminary bulletin provides information on what labor operation number to use for various electrical/electronic control issues.
060089026N2018-06-04. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY:SUN/MOON ROOF ASSEMBLY; STRUCTURE:BODY:DOOR; POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE); VISIBILITY:WINDSHIELD; ELECTRONIC STABILITY CONTROL (ESC). This warranty bulletin provides labor operation numbers for customer concerns that cant be duplicated.
080730026D2018-05-07. Service bulletin. ELECTRONIC STABILITY CONTROL (ESC). This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
10-00-89-006C2018-04-16. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: RADAR. This informational bulletin provides directions on submitting different PIRs
PIP5168F2018-02-21. Service bulletin. POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT; BACK OVER PREVENTION; FUEL SYSTEM, GASOLINE. This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a no crank concern. Technician will need to check the valve train for movement when the engine is cranked. If the valve train is not moving while the crankshaft is moving the front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the valve train is rotating during inspection, disconnect the Camshaft Position sensor and check if the engine will start. If the engine starts front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the engine does not start with the Camshaft Position sensor disconnected the follow published “Engine Cranks But Does Not Run” diagnosis in Service Information. Also perform an Engine Compression Test and Cylinder Leakage Test in Service Information documents all results. If the Service Information procedures above isolate an engine mechanical concern then removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly.
10-08-98-002A2017-08-15. Service bulletin. FORWARD COLLISION AVOIDANCE. This information bulletin explains the use of drilling high strength steel in a collision repair and the GM recommended CryoCobalt Drill bit.
PIC5257C2017-08-15. Service bulletin. ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC). This Preliminary Information communication provides information to the technician about vehicles that have a Service Stability message in the Driver Information Center. Technician may find a Diagnostic Trouble Code U0710 set. Technician should follow published Service Information diagnostics for Diagnostic Trouble Code C0710 and not U0710.
PIC5428G2016-09-23. Service bulletin. TRACTION CONTROL SYSTEM; SERVICE BRAKES, AIR:ANTILOCK:WHEEL SPEED SENSOR; SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:WHEEL SPEED SENSOR/TONE RING; SERVICE BRAKES, ELECTRIC. THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ON HOW TO DIAGNOSE AND REPAIR VEHICLES THAT MAY HAVE THE ANTILOCK BRAKING SYSTEM, SERVICE TRACTION CONTROL SYSTEM, AND/OR SERVICE STABILITRAK LIGHTS ARE ON. THE ELECTRONIC BRAKE CONTROL MODULE MAY HAVE ONE OR MORE OF THE FOLLOWING DIAGNOSTIC TROUBLE CODES C0035-C0050 WITH SPECIFICALLY SYMPTOM 18, 5A, OR 0F. TECHNICIAN WILL GAIN ACCESS TO THE CORRECT WHEEL BEAR PER THE DIAGNOSTIC TROUBLE CODE THAT IS SET. IF DEBRIS IS FOUND ON THE MAGNETIC ENCODER RING IT WILL NEEDED TO BE CLEANED.
PIC5515C2016-06-22. Service bulletin. TRACTION CONTROL SYSTEM; SERVICE BRAKES; ELECTRONIC STABILITY CONTROL (ESC). SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PIC5432D2016-06-22. Service bulletin. ELECTRONIC STABILITY CONTROL (ESC). SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PIC5432C2016-06-22. Service bulletin. ELECTRONIC STABILITY CONTROL (ESC). SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PIC-5551-A2012-02-08. Service bulletin. TRACTION CONTROL SYSTEM; ELECTRONIC STABILITY CONTROL (ESC); SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:WHEEL SPEED SENSOR/TONE RING. CHEVROLET: SOME MODEL YEAR VEHICLES ARE EXPERIENCING A DROP/SPIKE IN SPEED ON ANY WHEEL SPEED SENSOR AFTER NOISE, RATCHET, GRIND, OR ABS PUMP MOTOR, WAS HEARD, FROM FRONT OF VEHICLE. *PE
PIC-52042010-03-15. Service bulletin. ELECTRONIC STABILITY CONTROL (ESC). CHEVROLET: SES TRAC STABILITY INDICATORS ILLUMINATED RUN ROUGH OR CHUGGLES. THE VEHICLE VEHICLE WILL BEGIN TO CHUGGLE ON ACCEL AND ONE OR MORE OF THE FOLLOWING INDICATORS ARE ILLUMINATED-SES, LOW TRAC AND/OR SERVICE STABILITY. *PE

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.