WenmarOpen by Wenmar Pro

Service bulletin SSM 55080

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11036286
Published by NHTSA2026-08-20
Manufacturer's numberSSM 55080
Manufacturer's date2026-08-13
NHTSA componentELECTRICAL SYSTEM; UNKNOWN OR OTHER; FUEL/PROPULSION SYSTEM

NHTSA's summary

Some 2021-2023 Mustang Mach-E vehicles built on or before 25-Jun-2023, 2022-2025 E-Transit and 2022-2023 F-150 Lightning vehicles may experience a high voltage battery stop charging condition when using a direct current (DC) fast charger level 3 with diagnostic trouble codes (DTCs) P0EEE:27 and P2E53:27 stored in the on-board diagnostic control module A (SOBDM). This may be due to the SOBDM software. Replacement of the charge port will not resolve this concern. Inform customers that their vehicles can still be charged using a level 1 or level 2 alternating current (AC) charger. Engineering is currently working on a software solution expected in Q3 2026. Schedule an appointment with the customer when the repair becomes available. Monitor Professional Technician System (PTS) for additional information.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Fuel system

Trouble codes named

P0EEE, P2E53

Vehicles listed
FORD E-TRANSIT2022 to 2025
FORD F-150 LIGHTNING BEV2022, 2023 (the catalog's model; the bulletin names a series or trim of it)
FORD MUSTANG MACH E2021, 2022, 2023

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
20264322026-09-09. Fuel System
26V5820002026-09-09. ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY:MANAGEMENT SYSTEM/ENERGY CONTROL MODULE (BMS/BECM):SOFTWARE
26V5780002026-09-09. FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:MOUNTING
26V1040002026-02-20. EXTERIOR LIGHTING:TAIL LIGHTS; ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL
20253662025-07-08. Fuel System
25V4550002025-07-07. FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
25V4410002025-06-27. ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY:MANAGEMENT SYSTEM/ENERGY CONTROL MODULE (BMS/BECM)
20253262025-06-13. Electrical
25V4040002025-06-13. ELECTRICAL SYSTEM:BODY CONTROL MODULE:SOFTWARE; LATCHES/LOCKS/LINKAGES:DOORS:LATCH
25V2720002025-04-23. ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
26B072026-10-02. Other. Recommended Repair Prior to Sale Customer Satisfaction Program 26B07 Certain 2021-2025 Model Year F-150 Lightning and Mustang Mach-E Vehicles Undesired Acceleration Due to Adaptive Cruise Control (ACC) Activation
SSM 551942026-09-30. Service bulletin. Some 2021-2024 Mustang Mach-E, 2025-2026 Navigator and 2024 F-150 vehicles may exhibit inoperative welcome/approach detection lights. This may be due to the body control module (BCM) software. To correct the condition, download and run the "BCM - Programmable Module Installation (PMI)" application using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. If the condition persists after PMI, refer to Workshop Manual (WSM), Section 417-01 for normal diagnostics and repair as necessary outside of this article. For claiming, use causal part 15604 and labor operations 12651D and BCM.
TCU-26.2.12.2.2 Mach E, F2026-09-21. Over-the-air update. Quality improvements include: -Addresses a bug that may cause updates to fail
ECG-26.2.12.3 F-150LtMac2026-09-21. Over-the-air update. Quality improvements include: -ePrivacy enhancements
SYNC-26.2.8.5 F-1502026-09-14. Over-the-air update. 26C37 Recall remedy Prevents a potential rearview camera image obstruction caused by a menu displaying on top of it
TSB 26-23912026-09-12. Service bulletin. This bulletin updates 26-2206. Reason for update: update the Service Procedure to revise Steps 19-21, adding Step 22, and adding Figure 15-16 to clarify connector C316 location. Some of the vehicles listed in the Model statement above may exhibit diagnostic trouble codes (DTCs) C1001:31, U3000:89, and/or U3000:49 stored in the image processing module A (IPMA) and at least one of the following conditions: "Front Camera Fault Service Required" message Pre-collision assist inoperative Adaptive cruise control inoperative Front windshield camera alignment routine fails to complete This may be due to the coaxial cable between the IPMA camera and the IPMA.
TSB 26-23952026-09-01. Service bulletin. This article supersedes 26-2287. Reason for update: update the labor operation numbers to add MT to operations C, F, G, H, J, K, L and M, and correct the part number LIMZ-4A015-B to L1MZ-4A015-B. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: Harsh engagement Delayed engagement Harsh shift Delayed shift Illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC)s P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to axial movement of the CDF clutch cylinder sleeve causing hydraulic circuit leaks. NOTE: If internal transmission service is required to address a concern detected with the CDF clutch cylinder following this article, technicians should carefully inspect and replace other transmission components and flush transmission fluid cooler only as ne
SSM 551112026-09-01. Service bulletin. Some 2022-2026 F-150 Lightning vehicles may exhibit a reduced distance to empty (DTE) projection, a high voltage battery pack state of charge (SOC) that drops from 100% to less than 90% within 60 seconds of being driven, and an inability to reach a target SOC using the scheduled charging feature without any diagnostic trouble codes (DTCs) in the battery energy control module (BECM). This may be due to an issue in one or more cells within the high voltage battery pack. To correct the condition, run the "BECM Battery Health" application using the latest software version of the Ford Diagnosis and Repair System (FDRS). If any cells are identified as exceeding state of charge and/or capacity thresholds, refer to the Workshop Manual (WSM), Section 414-03A High Voltage Battery, Mounting and Cables > Diagnosis and Testing > High Voltage Battery, Mounting and Cables Electric. Perform Pinpoint Test High Voltage Battery Pack Cell Balancing Faults, Step 4 (PPT Step AO4 for 2022-2024 vehicles/PPT Step AQ4 for 2024-2026 vehicles) and proceed with Pinpoint Test directions following the results of Step 4.
PT-26.13.13 F-150 Ltng2026-08-18. Over-the-air update. 25C69 Recall remedy - Updates the Secondary On-Board Diagnostic Module C to provide for release of the Integrated Park Module slider in the event a bind condition occurs allowing park to be engaged
TSB 26-23602026-08-10. Service bulletin. Some of the vehicles listed in the Model Statement above may exhibit an intermittent extended crank with no relevant diagnostic trouble codes (DTCs) present. This may be due to various software parameters in the powertrain control module (PCM).