WenmarOpen by Wenmar Pro

Service bulletin SSM 51935

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10243603
Published by NHTSA2023-10-05
Manufacturer's numberSSM 51935
Manufacturer's date2023-09-19
NHTSA componentBACK OVER PREVENTION:SOFTWARE

NHTSA's summary

Some 2022 Edge vehicles built on and after 16-Nov-2022, 2022 Explorer vehicles built on and after 20-Sep-2022, 2023 Edge vehicles built on and before 24-Mar-2023, and 2023 Explorer vehicles built on and before 06-Mar-2023 may exhibit a brief illumination of the malfunction indicator lamp (MIL) when the vehicle is shifted into park (P) with diagnostic trouble code (DTC) P0919 and/or P0929 stored in the gear shift module (GSM). This may be due to the GSM software. To correct this condition, update the software in the GSM using the latest software level of the Ford Diagnosis and Repair System (FDRS).

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Driver assistance, Backup camera

Trouble codes named

P0919, P0929

Vehicles listed
FORD EDGE2022, 2023
FORD EXPLORER2022, 2023

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
26V1240002026-03-03. BACK OVER PREVENTION:SOFTWARE
26V1230002026-03-03. BACK OVER PREVENTION:SOFTWARE
25V4420002025-06-27. BACK OVER PREVENTION:SOFTWARE
25V3150002025-05-09. BACK OVER PREVENTION:SOFTWARE
25V1600002025-03-14. BACK OVER PREVENTION:SOFTWARE
25V1590002025-03-14. BACK OVER PREVENTION:SOFTWARE
23V6860002023-10-13. BACK OVER PREVENTION:DISPLAY FUNCTION; ELECTRICAL SYSTEM:WIRING
23V3420002023-05-12. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
23V3050002023-04-28. BACK OVER PREVENTION:DISPLAY FUNCTION
23V0220002023-01-23. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
25N172026-03-27. Other. Advance Notice – Customer Satisfaction Program 25N17 Certain 2015-2025 Model Year Multiple Vehicle Lines Rear View Camera Replacement If Required After Dealer Evaluation
SSM 523902024-04-04. Service bulletin. Some 2023-2024 Explorer vehicles built on or after 31-Jul-2023 (minor feature code J3KAJ which can be confirmed by double-clicking the VIN on PTS in the upper left corner) are no longer equipped with the 360 degree view camera or reverse brake assist features. Vehicles affected are equipped with only rear functioning cameras. The vehicle is not misbuilt. Do not submit a claim for this condition. Affected vehicles of this change can be verified by entering a vehicle identification number (VIN) on Professional Technician System (PTS) to check for a 360-degree camera credit on the window sticker. Diagnosis and repair for any parking aid concerns on these vehicles should follow Workshop Manual (WSM) Section 413-13B for Rear Parking Aid Camera System only. Do not use the 360 degree view camera or reverse brake assist diagnostics or repair procedures.
SSM 521342023-12-19. Service bulletin. Various 2021-2024 Ford and Lincoln vehicles equipped with the rear camera on demand feature may exhibit a Please Check Surroundings For Safety or Full View Not Available message when the rear camera button is pressed and the vehicle is not in reverse. Inform customers this condition is considered normal operation and does not affect vehicle durability because the full rear view camera image can only be shown when the vehicle is in reverse. No additional diagnosis or service is required for this condition.
SU4 P4 EDGE2023-09-07. Service bulletin. "Software Update 4 P4 for 2021- 2023 Edge vehicles is now available. Quality Improvements include: - Various Apple Carplay quality improvements "
SSM 518862023-09-03. Service bulletin. Some 2023 Explorer vehicles built on or after 31-Jul-2023 are no longer equipped with the 360 degree view camera or reverse brake assist features. Vehicles affected will be equipped with only rear functioning cameras. The vehicle is not miss built. Do not submit a claim for this condition. Affected vehicles of this change can be verified by entering a vehicle identification number (VIN) on Professional Technician Society (PTS) to check for a 360-degree camera credit on the window sticker. Diagnosis and repair for any parking aid concerns on these vehicles should follow Workshop Manual (WSM) Section 413-13B for Rear Parking Aid Camera System only. Do not use the 360 degree view camera or reverse brake assist diagnostics or repair procedures.
SSM 517782023-07-20. Service bulletin. Some 2020-2021 Escape built on/before 23-Nov-2021, 2021 F-150 built on/before 08-Oct-2021, 2021 Mustang Mach-E built on/before 29-Mar-2021, 2021 Expedition built on/before 05-Aug-2021, 2021 Explorer built on/before 27-Sep-2021 and 2020-2022 Edge may exhibit a concern of the audio system does not power on, no sound from audio speakers, chimes default to coming through the instrument cluster, no communication with audio control module (ACM) or digital signal processor (DSP) module, and/or diagnostic trouble code (DTC) U0184, U0237 and/or U0238. To correct the condition, perform a hard reset of the DSP by disconnecting the 12-volt battery. Reprogram the DSP module using the latest version of the appropriate Ford diagnostic scan tool. For claiming, use causal part 18B849 and any applicable labor operations in Section 10 of the Service Labor Time Standards Manual.
SSM 514072023-04-04. Service bulletin. Some 2021-2022 Ford and Lincoln vehicles equipped with SYNC 4 may experience an error message during the gateway module (GWM) software update application which states Procedure Unsuccessful- GetConfigDataFromGIVIS. This may be the result of a server related concern. To correct the condition, download and run the Ford Diagnosis and Repair System (FDRS) application GWM-Read the Gateway Module A (GWM) Configuration Data application. When the application completes, refresh and re-attempt the GWM-Gateway Module A (GWM) Software Update application. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
TSB 22-24192022-12-02. Service bulletin. This article supersedes TSB 22-2062 to update the Issue, Action and Service Procedure. Some 2021-2022 Edge/Nautilus vehicles may experience one or more of the following symptoms: Inoperative Front Camera if the camera system button is pressed once the vehicle is below the speed threshold of 6 mph (10 km/h) (Edge Only), Android Auto connection concerns, Apple CarPlay connection concerns, center display screen freezing/locking up, windows media audio (WMA) files not playing properly from a universal serial bus (USB) device, intermittent blank center display screen, Bluetooth connectivity concerns, incorrect Owner's Manual language for French, frozen or delayed touch response for center display screen. This may be due to the software in the accessory protocol interface module (APIM). To correct the condition, follow the Service Procedure to reprogram the APIM. NOTE: The APIM software update that addresses the symptom listed in this article may have been delivered over-the-air (OTA) via Ford Power-Up software updates to connected vehicles that have automatic updates enabled through the center display screen
SSM 511692022-11-29. Service bulletin. Some 2020-2022 Aviator/Explorer Hybrid vehicles may experience a concern where the EV power flow does not display in the center display screen. This may be due to accessory protocol interface module (APIM) software. To correct the condition, run the APIM-SYNC Module (APIM) Standard Programming application using the latest software level of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 14G371 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
OTA SU3 P1 Edge2022-09-01. Service bulletin. Software Update 3 Part 1 for 2021-2022 Model Year Edge vehicles is now available. Quality Improvements Include: Fix for front parking camera unavailable.