NHTSA recall 25V442000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 25V442000 |
| Manufacturer's number | 25S72 |
| Manufacturer | Ford Motor Company |
| Reported | 2025-06-27 |
| Owners notified | 2025-09-04 |
| Component | BACK OVER PREVENTION:SOFTWARE |
| Units potentially affected | 200237 |
| Part numbers | NU5T-14G381-AB |
| Report | Quarterly report 4, for 2026 quarter 2 |
|---|---|
| Filed with NHTSA | 2026-07-17 |
| Vehicles in the campaign | 200237 |
| Reported remedied | 109643 (54%) |
| Reported unreachable | 4800 |
| Reported removed | 51 |
These are the manufacturer's totals for the whole campaign at the end of 2026 quarter 2, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Ford Motor Company (Ford) is recalling certain 2018-2022 Transit Connect, 2019-2020 MKZ, MKX, Edge, Continental, F-150, Nautilus, Fusion, 2019-2023 Ranger, Mustang, 2020-2021 EcoSport, Expedition, Navigator, 2020-2022 Escape, F-250 SD, Corsair, 2020-2023 Aviator, Transit, 2020-2024 Explorer, 2021-2024 Bronco Sport, and 2022-2024 Maverick vehicles. A software error may cause the rearview camera to display a blank image, or the image may remain on the display after the backing event has ended.
What can happen
A rearview camera that displays a blank image can reduce the driver's view behind the vehicle. A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver. Both of these situations can increase the risk of a crash.
The remedy
Dealers will update the rearview camera software, free of charge. Owner notification letters were mailed September 4, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S72.
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 25N17 | 2026-03-27. Other. Advance Notice – Customer Satisfaction Program 25N17 Certain 2015-2025 Model Year Multiple Vehicle Lines Rear View Camera Replacement If Required After Dealer Evaluation |
|---|---|
| SSM 52390 | 2024-04-04. Service bulletin. Some 2023-2024 Explorer vehicles built on or after 31-Jul-2023 (minor feature code J3KAJ which can be confirmed by double-clicking the VIN on PTS in the upper left corner) are no longer equipped with the 360 degree view camera or reverse brake assist features. Vehicles affected are equipped with only rear functioning cameras. The vehicle is not misbuilt. Do not submit a claim for this condition. Affected vehicles of this change can be verified by entering a vehicle identification number (VIN) on Professional Technician System (PTS) to check for a 360-degree camera credit on the window sticker. Diagnosis and repair for any parking aid concerns on these vehicles should follow Workshop Manual (WSM) Section 413-13B for Rear Parking Aid Camera System only. Do not use the 360 degree view camera or reverse brake assist diagnostics or repair procedures. |
| OTA24PU0102CSUFX | 2024-03-07. Service bulletin. Software Update 24-PU0102-CHG-SUFX for 2021-2023 MY Mach E vehicles is now available. Quality Improvements include: - Improved robustness in alignment of turtle light display to reduced power event. - Improved AC Charge process reporting accuracy - Improves HV Battery Charging experience. - Robustness actions for DC Fast Charge: charging and diagnostics. - Improvements to On Demand Preconditioning. - The customer is instructed to exit the vehicle when a battery hazard is detected. - Adds torque to front drive unit to help whine at 30- 70 mph coast condition - Corrects software issue relating to charging which may occur after the BCCM receives an Over The Air (OTA) update. - Corrects ABS cal files |
| OTAPU0102SVDFX2 | 2024-03-07. Service bulletin. Software Update FPU 23-PU1113-UNX-DC for 2021-2023 MY Mach E vehicles is now available. Quality Improvements include- The customer is instructed to exit the vehicle when a battery hazard is detected |
| SSM 52134 | 2023-12-19. Service bulletin. Various 2021-2024 Ford and Lincoln vehicles equipped with the rear camera on demand feature may exhibit a Please Check Surroundings For Safety or Full View Not Available message when the rear camera button is pressed and the vehicle is not in reverse. Inform customers this condition is considered normal operation and does not affect vehicle durability because the full rear view camera image can only be shown when the vehicle is in reverse. No additional diagnosis or service is required for this condition. |
| SSM 51935 | 2023-10-05. Service bulletin. Some 2022 Edge vehicles built on and after 16-Nov-2022, 2022 Explorer vehicles built on and after 20-Sep-2022, 2023 Edge vehicles built on and before 24-Mar-2023, and 2023 Explorer vehicles built on and before 06-Mar-2023 may exhibit a brief illumination of the malfunction indicator lamp (MIL) when the vehicle is shifted into park (P) with diagnostic trouble code (DTC) P0919 and/or P0929 stored in the gear shift module (GSM). This may be due to the GSM software. To correct this condition, update the software in the GSM using the latest software level of the Ford Diagnosis and Repair System (FDRS). |
| SU4 P1 SuperDuty | 2023-09-07. Service bulletin. Software Update 4 P1 for 2022 Super Duty vehicles is now available. Quality improvements include: - Minimize time customer cannot enter the vehicle during future inhibit updates. |
| SSM 51886 | 2023-09-03. Service bulletin. Some 2023 Explorer vehicles built on or after 31-Jul-2023 are no longer equipped with the 360 degree view camera or reverse brake assist features. Vehicles affected will be equipped with only rear functioning cameras. The vehicle is not miss built. Do not submit a claim for this condition. Affected vehicles of this change can be verified by entering a vehicle identification number (VIN) on Professional Technician Society (PTS) to check for a 360-degree camera credit on the window sticker. Diagnosis and repair for any parking aid concerns on these vehicles should follow Workshop Manual (WSM) Section 413-13B for Rear Parking Aid Camera System only. Do not use the 360 degree view camera or reverse brake assist diagnostics or repair procedures. |
| SSM 51778 | 2023-07-20. Service bulletin. Some 2020-2021 Escape built on/before 23-Nov-2021, 2021 F-150 built on/before 08-Oct-2021, 2021 Mustang Mach-E built on/before 29-Mar-2021, 2021 Expedition built on/before 05-Aug-2021, 2021 Explorer built on/before 27-Sep-2021 and 2020-2022 Edge may exhibit a concern of the audio system does not power on, no sound from audio speakers, chimes default to coming through the instrument cluster, no communication with audio control module (ACM) or digital signal processor (DSP) module, and/or diagnostic trouble code (DTC) U0184, U0237 and/or U0238. To correct the condition, perform a hard reset of the DSP by disconnecting the 12-volt battery. Reprogram the DSP module using the latest version of the appropriate Ford diagnostic scan tool. For claiming, use causal part 18B849 and any applicable labor operations in Section 10 of the Service Labor Time Standards Manual. |
| SSM 51652 | 2023-05-31. Service bulletin. Some 2022 F-Super Duty vehicles equipped with a 6.7L engine, and built on 13-May-2022 and through 05-Aug-2022 at Kentucky Truck Plant or built on 13-Jun-2022 and through 09-Aug-2022 at Ohio Assembly Plant may exhibit an illuminated malfunction indicator lamp (MIL) with various diagnostic trouble codes (DTC) stored in the powertrain control module (PCM). While attempting to perform TSBs 23-2077, 23-2076, and/or 23-2082, vehicles that were produced without a particulate matter sensor will not show a PCM software update available in Ford Diagnosis and Repair System (FDRS). Refer to EFC10061 (MBG-2022-174N in Canada) and monitor OASIS for updates. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.