Service bulletin ASI-45177

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
Type	Service bulletin
NHTSA id	10074794
Published by NHTSA	2016-06-22
Manufacturer's number	ASI-45177
Manufacturer's date	2015-06-01
NHTSA component	ELECTRICAL SYSTEM

NHTSA's summary

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Electrical system

Vehicles listed
LINCOLN MKZ	2013, 2014

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
13V230000	2013-05-31. ELECTRICAL SYSTEM
2013187	2013-05-29. Electrical

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
22R01 S1	2022-10-05. Service bulletin. Certain 2014 - 2015 Model Year, Fusion and MKZ and 2015 Model Year Mustang Vehicles Brake Stop Lamps Remain On REF: Safety Recall 22S02 Certain 2014 - 2015 Model Year, Fusion and MKZ and 2015 Model Year Mustang Vehicles Brake Stop Lamps Remain On Submitting Owner Letters and Tech Bulletin
22R01-S1	2022-05-19. Service bulletin. Certain 2014 - 2015 Model Year, Fusion and MKZ and 2015 Model Year Mustang Vehicles Brake Stop Lamps Remain On - Under Safety Recall 22S02, in some of the affected vehicles, exposure to a high temperature, high humidity, and high salinity environment is causing the brake pedal “stop bumper” to disintegrate and fall off on some of the affected vehicles resulting in the brake stop lamps remaining on continuously, even when the brake pedal is not applied. If the brake pedal bumper is missing on automatic transmission vehicles, the engine can be started, and the transmission can shift out of park without depressing the brake pedal. For 22R01, owners will be instructed to request a repair under this regional program if their vehicle exhibits brake pedal concerns or if they are concerned about the brake pedals in their vehicles.
22R01	2022-04-04. Service bulletin. Certain 2014-2015 Model Year, Fusion and MKZ and 2015 Model Year Mustang Vehicles - Brake Stop Lamps Remain On. Under Safety Recall 22S02, in some of the affected vehicles, exposure to a high temperature, high humidity, and high salinity environment is causing the brake pedal "stop bumper" to disintegrate and fall off on some of the affected vehicles resulting in the brake stop lamps remaining on continuously, even when the brake pedal is not applied. If the brake pedal bumper is missing on automatic transmission vehicles, the engine can be started, and the transmission can shift out of park without depressing the brake pedal. For 22R01, owners will be instructed to request a repair under this regional program if their vehicle exhibits brake pedal concerns or if they are concerned about the brake pedals in their vehicles.
TSB160031	2021-12-20. Service bulletin. 2.0L GTDO - Illuminated MIL with DTC p2096 - Built on 09/01/2012 and through 08/01/2013
LTR3756	2021-12-20. Service bulletin. 49 CFR Part 579.5 Monthly Communications - January 2016
16-0075	2020-12-07. Service bulletin. Some 2013 Escape, 2013-2014 Fusion and MKZ vehicles built on or before 11/9/2013 may exhibit a hard start, no start and/or a loss of engine RPM after refueling. Some vehicles may also exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P1450 and/or P0456 stored in powertrain control module (PCM) memory.
16-0066	2020-12-07. Service bulletin. Some 2012-2016 vehicles equipped with a touchscreen navigation system and the language set to Arabic may exhibit a blank screen. This may be the result of the ribbon cables not being fully seated inside the front display interface module (FDIM) or an improper software configuration of the FDIM.
TSB 20-2386	2020-12-05. Service bulletin. Some 2013-2020 MKZ vehicles may need the exterior rear view mirror replaced. The replacement exterior mirror will have different wiring than the originally equipped mirror. Follow the Service Procedure steps below to modify the vehicle-side wiring harness to accept the replacement mirror wiring.
SSM 48858	2020-06-04. Service bulletin. Some 2012-2020 Ford and Lincoln vehicles equipped with a TCU may exhibit an inoperative remote start with a 'Vehicle Failed To Start' message when using MyFord Mobile/Ford Pass/Lincoln Way mobile applications. The cellular cloud systems will only allow two remote start requests from the MyFord Mobile/Ford Pass/Lincoln Way apps without a vehicle drive event occurring. If a third remote start request is received, a Vehicle Failed To Start message will be displayed quickly in the mobile app. Once the vehicle is driven, the remote start counter is reset and will allow remote start commands to be sent from the mobile app. If the remote start system is not functioning using the key fob, refer to Workshop Manual (WSM) Section 303-06 for further diagnosis.
SSM 48619	2020-04-02. Service bulletin. SSM 48619 - Various Vehicles - Perimeter Alarm Armed And Original Vehicle Keys Cannot Be Accessed to Enter Vehicle - CAN Protection Strategy Some 2013-2016 Model Year Vehicles may exhibit a concern in which the Perimeter Alarm is active and the original keys cannot be accessed to disable the perimeter alarm. This concern would most often occur when a customer loses keys and the dealership is attempting to program new keys to the vehicle. The Workshop Manual (WSM), Section 419-01A Perimeter Anti-Theft Alarm - System Operation and Component Description has been updated to inform of the Controller Area Network (CAN) Protection Strategy. Follow the procedure outlined to prevent replacement of the Body Control Module (BCM) on CAN Protection Strategy equipped vehicles when original keys are lost and perimeter alarm is active. Refer to the WSM for further detail on the CAN Protection Strategy. Lost keys and replacement of BCM for lost keys is non-warrantable.