WenmarOpen by Wenmar Pro

Service bulletin 16-0075

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10183776
Published by NHTSA2020-12-07
Manufacturer's number16-0075
Manufacturer's date2016-04-25
NHTSA componentELECTRICAL SYSTEM

NHTSA's summary

Some 2013 Escape, 2013-2014 Fusion and MKZ vehicles built on or before 11/9/2013 may exhibit a hard start, no start and/or a loss of engine RPM after refueling. Some vehicles may also exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P1450 and/or P0456 stored in powertrain control module (PCM) memory.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system

Trouble codes named

P0456, P1450

Vehicles listed
FORD ESCAPE2013
FORD FUSION2013, 2014
LINCOLN MKZ2013, 2014

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
20260042026-01-09. Electrical
20184432018-08-23. Electrical
15V8130002015-12-02. ELECTRICAL SYSTEM:WIRING
20143492014-08-12. Electrical
14V4950002014-08-11. ELECTRICAL SYSTEM:WIRING
13V2300002013-05-31. ELECTRICAL SYSTEM
20131872013-05-29. Electrical

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
25H05 S12026-04-30. Other. Harvest Program 25H05 – Supplement #1 Certain 2011-2021 Model Year Vehicles Software Verification Harvest Program
SSM 546012026-02-27. Service bulletin. Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k
25H052025-12-03. Other. This is a proactive investigation program by Ford Motor Company to inspect a limited number of affected vehicles that are customer-owned. Ford is voluntarily conducting this program to evaluate the software currently installed on one or more electronic modules in the affected vehicles.
21B09 S22023-05-02. Service bulletin. Certain 2014-2020 Model Year Multiple Vehicle Lines 3G Telematics Control Unit to 4G Upgrade Kit REASON FOR THIS SUPPLEMENT Program Terms & Urgency / Expiration Date: Program extension until July 31, 2023. Service Action: o IDS level 128 or higher is now required to address various programming issues encountered. o C-MAX Energi vehicles are now serviceable with new software and hardware. Labor Allowances: C-MAX labor has been updated. Parts Requirements / Ordering Information: o The C-MAX 4G Upgrade Kit is now orderable at this time with a new part number. o MKX Rear seat backrest nut claim quantity updated. Technical Information updates: o Ensure IDS level 128 or higher is used. o Toggling Valet Mode is no longer required. o C-MAX Energi instructions are now available. Owner Notification: Non-repaired vehicle owners will be mailed the week of April 17, 2023. Pickup and Delivery: Added Customer Acknowledgement Form - Review form contents with customer prior to kit ordering and obtain customer signature prior to installation for Focus BEV, C-MAX, and Fusion Energi vehicles.
22R01 S12022-10-05. Service bulletin. Certain 2014 - 2015 Model Year, Fusion and MKZ and 2015 Model Year Mustang Vehicles Brake Stop Lamps Remain On REF: Safety Recall 22S02 Certain 2014 - 2015 Model Year, Fusion and MKZ and 2015 Model Year Mustang Vehicles Brake Stop Lamps Remain On Submitting Owner Letters and Tech Bulletin
TSB 22-22302022-06-27. Service bulletin. Some 2013-2017 C-MAX Energi, 2013-2018 Focus battery electric vehicle (BEV), 2013-2020 Fusion plug-in hybrid electric vehicle (PHEV), 2015-2017 MKZ/MKZ Hybrid/MKC, 2016-2017 MKX and 2017 Continental vehicles equipped with SYNC screens 8 inch or larger may be unable to complete modem authorization after 3G to 4G modem upgrade was performed. No Authorization Popup will be displayed on SYNC infotainment screen during the Authorization process. The vehicle may also not have proper functionality of remote app features such as remote start, and return odometer and fuel information to the app. This may be due to the SYNC software. To correct the condition, follow the Service Procedure to toggle Valet Mode.
SSM 508042022-06-01. Service bulletin. Some 2013-2023 Ford or Lincoln vehicles with modems activated through FordPass or LincolnWay may experience 12 volt battery drain symptoms when the customer uses non-Ford/Lincoln phone applications as an alternate channel to access vehicle commands such as door lock/unlock, remote start, vehicle location, etc. The battery drain may be caused by excessive calls for data through the vehicle network keeping it in an activated state. Recommend that the customer uninstall the app to ensure this is not contributing to battery symptoms experienced. Advise the customer that unaffiliated third-party app developers do not work directly with Ford to adhere to security, vehicle communication, and privacy requirements.
22R01-S12022-05-19. Service bulletin. Certain 2014 - 2015 Model Year, Fusion and MKZ and 2015 Model Year Mustang Vehicles Brake Stop Lamps Remain On - Under Safety Recall 22S02, in some of the affected vehicles, exposure to a high temperature, high humidity, and high salinity environment is causing the brake pedal “stop bumper” to disintegrate and fall off on some of the affected vehicles resulting in the brake stop lamps remaining on continuously, even when the brake pedal is not applied. If the brake pedal bumper is missing on automatic transmission vehicles, the engine can be started, and the transmission can shift out of park without depressing the brake pedal. For 22R01, owners will be instructed to request a repair under this regional program if their vehicle exhibits brake pedal concerns or if they are concerned about the brake pedals in their vehicles.
TSB 22-21622022-05-12. Service bulletin. Some 2014-2017 C-MAX Energi, 2014-2020 Fusion plug-in hybrid electric vehicle (PHEV), 2015-2017 MKZ/MKZ Hybrid/MKC, 2016-2017 MKX, 2016-2018 Focus battery electric vehicle (BEV) and 2017 Continental vehicles equipped with SYNC screens 8 inch or larger may be unable to complete modem authorization after 3G to 4G modem upgrade was performed. No Authorization Popup displayed on SYNC infotainment screen during the Authorization process. This may be due to the Sync Software. To correct the condition, follow the Service Procedure to toggle Valet Mode.
22R012022-04-04. Service bulletin. Certain 2014-2015 Model Year, Fusion and MKZ and 2015 Model Year Mustang Vehicles - Brake Stop Lamps Remain On. Under Safety Recall 22S02, in some of the affected vehicles, exposure to a high temperature, high humidity, and high salinity environment is causing the brake pedal "stop bumper" to disintegrate and fall off on some of the affected vehicles resulting in the brake stop lamps remaining on continuously, even when the brake pedal is not applied. If the brake pedal bumper is missing on automatic transmission vehicles, the engine can be started, and the transmission can shift out of park without depressing the brake pedal. For 22R01, owners will be instructed to request a repair under this regional program if their vehicle exhibits brake pedal concerns or if they are concerned about the brake pedals in their vehicles.