WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Ram 3500

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

394 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
D-16-28 Rev. A2018-06-11. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR. DAPAP Requirements - Addition of Exterior Mirrors (Rev. A)
311152018-06-11. Service bulletin. EQUIPMENT; STRUCTURE:BODY:ROOF AND PILLARS. Cover - Roof Rack Youhave been identified aseither having stock,or have stock in transit toyour dealership. Please return allsuspect stock of part numbers:68212041AC,68141170AC,55112738AA.See attachmentsfor identifying suspect material. Please return suspect partsback toyour facing depot using Return Code 02,before 19April,2017.
311272018-06-11. Service bulletin. FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP; FUEL SYSTEM, GASOLINE. Housing Assy - Fuel Filler Door Youhave been identified aseither having stock,or have stock in transit toyour dealership. Please return allsuspect stock of part numbers:68148794AH,68148794AF,68148794AD,68156453AH,68156453AF, 68156453AD,68161542AE,68161542AD.See attachment for identifying suspect material. Please return suspect partsback toyour facing depot using Return Code 02,before 19April,2017.
310562018-06-11. Service bulletin. EQUIPMENT; SEATS. Recliner - Stow and Go: Return Youhave been identified aseither having stock,or have stock in transit toyour dealership. Please return allstock of following part numbers:68241568AB,68241568AC,68241569AB,68241569AC, 68241570AB,68241571A.Replacement part numbersare 68241568AD,68241569AD,68241570AD,68241571AD, which are in stock and available. Please return suspect partsback toyour facing depot using Return Code 02,before 19April,2017.
309482018-06-11. Service bulletin. EQUIPMENT; INTERIOR LIGHTING. Molding Assy ?Frt door day light opening Rt/Lt: Return You have been identified as either having stock, or have stock in transit to your dealership. Please return all suspect stock of following part numbers: 57010364AI, 57010365AI, 57010504AJ, 57010505AJ, 68224368AB, 68224369AB. Please return suspect parts back to your facing depot using Return Code 02, before 17 April, 2017.
307312018-06-11. Service bulletin. ENGINE; ENGINE AND ENGINE COOLING. 04627694AA Purge Control - Valve You have been identified as either having stock, or have stock in transit to your dealership. Suspect stock of part number: 04627694AA must be returned. See attached for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 17 April, 2017.
309282018-06-11. Service bulletin. VISIBILITY:WINDSHIELD. 55395241AG Weatherseal - Windshield to Cowl Please return allstock of following part numbers:55395241AG,55395241AE.Replacement ispart number 55395241AH which isin stock and available. Please return suspect partsback toyour facing depot using Return Code 02,before 12April,2017
308652018-06-11. Service bulletin. LATCHES/LOCKS/LINKAGES:HATCHBACK/LIFTGATE:LOCK; STRUCTURE:BODY:HATCHBACK/LIFTGATE. 04589131AG, 04589243AG - Inspect and Return: Liftgate - Latch Assy You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 04589131AG, 04589243AG . See attachments for identifying suspect stock. Replacement part can be obtained by reordering the same part number. Please return suspect parts back to your facing depot using Return Code 02, before 7 April, 2016.
306572018-06-11. Service bulletin. ELECTRICAL SYSTEM. R4801865AC Alternator Assy - 220 Amp You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of part number R4801865AC. Replacement is part number 04801865AE which is in stock and available. Please return suspect parts back to your facing depot using Return Code 02, before 04 April, 2017.
90030592018-06-11. Service bulletin. EQUIPMENT:ELECTRICAL. Park Assist Sensor 1) Active or Stored DTC of Signal Shape / Waveform Failure fault: B128E-25, B128F-25, B1290-25, B1291-25, B1292-25, B1293-25, B1295-25, B1296-25, B1297-25, and/or B1298-25, check for snow/mud/ice/obstruction and clean the Sensors, both front and back (behind bumper) of sensor. The snow/mud/ice can be behind the bumper, sensor retainer and/or the sensor which may cause customers to think they have an issue since they cleaned the front of the sensor/bumper, but not behind where dirt/mud/ice snow can accumulate. Once the Bumper and Sensors are completely cleaned and clear of snow, mud, ice, and/or obstruction, the sensors must activate in order for the faults to go STORED. After cleaning the Bumper and Sensors, turn off the engine, wait 10 seconds, turn on the engine and then place the vehicle in REVERSE so that the sensors activate. The faults will go STORED. 2) Active or Stored DTC code of Short to Ground fault: B128E-11, B128F-11, B1290-11, B1291-11, B1292-11, B1293-11, B1294-11, B1295-11, B1296-11, and/or B1298-11, or if you have an active or stored DTC code of Performance or Incorrect Operation fault: B128E-92, B128F-92, B1290-92, B1291-92, B1293-92, B1294-92, B1295-92, B1296-92, B1297-92, and/or B1298-92, then check the wiring behind the sensor. Specifically, ensure that the connector behind the park assist sensor is fully mounted. Ensure also, there is no dirt, corrosion, or damage in this connector behind the park assist sensor as this will also cause a Short to Ground fault. With potential wiring issues addressed, the sensors must activate in order for the faults to go STORED. After all sensors are properly connected (you will likely hear a click once the connector is fully seated on the sensor), turn off the engine, wait 10 seconds, turn on the engine and then place the vehicle in REVERSE so that the sensors activate. The faults will go STORED.
90036962018-06-11. Service bulletin. STRUCTURE:BODY:DOOR. Door Hinge Assembly Side door hinge noisy. Only replace the door hinge with the integral check device. Do not replace the simple hinge if it is not damaged it is not the source of the noise. Replacing it unnecessary and is an over-repair.
90036942018-06-11. Service bulletin. ENGINE AND ENGINE COOLING. Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system
90036932018-06-11. Service bulletin. ENGINE AND ENGINE COOLING. Gasket, Rocker Cover If you are replacing this gasket for an oil leak, please call Steve Alvarado @ (866) 799-1695 ext: 4720271 to arrange for Fastrac shipper
90036812018-06-11. Service bulletin. SEAT BELTS. Restraints Information Sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
90036872018-06-11. Service bulletin. SEAT BELTS. Restraints Remove I-Sheet from packaging. Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
90032162018-06-11. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES. Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full foward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together.
STAR News No. 852018-06-11. Service bulletin. EQUIPMENT. STAR receives on average 1,000 contacts per day ? that?s 300,000 annual contacts for technical assistance. This same month last year we had over 40,000 open aged > 5 days tickets. As a result of focused efforts to verify vehicles are repaired and close tickets the number is now at just under 7,000 tickets.
BJA465972018-06-11. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; POWER TRAIN. Job aid - If you have a suspected TC shudder/vibration, check the Interactive Network for Service Bulletins for the vehicle you are working on. A test-drive snap shot may help you isolate the source of the issue.
18-040-17 REV. A2018-06-04. Service bulletin. POWER TRAIN. Flash: 6.4L Powertrain Diagnostic and System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. This bulletin fixes all vehicles listed and also contains an optional software path for situations where the customer is specifically complaining of a drone noise, shudder, pulsation, or vibration under light throttle applications, while vehicle is operating in Multi Displacement System/Economics (MDS/ECO)mode (optional software available for D2&DJ vehicles).There will be two separate software options displayed on the wiTECH flash tab. The software file released for this condition contains the verbiage MDS NOISE. The other file is the standard software that does not contain improvements for the drone/shudder concern. If for some reason the customer finds this shudderimprovement objectionable, the PCM software may be returned/reflashed to the standard version.Both software versions will address the remaining conditions noted in the bulletin.A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following DTCs have been set:P1404 - EGR Close Position Performance. P0404 - EGR Position Sensor Performance. P0405 - EGR Position Sensor Circuit Low. P0406 - EGR Position Sensor Circuit High. P2172 ? High Airflow/Vacuum leak detected. P0870 - OD Hydraulic Pressure Test (66RFE Only). This software update also includes the following enhancements:Reduced downhill gear hunting when using cruise control. Reduced drone noise at minimum converter clutch operating speed. Reduced low speed drone noise. Improved Exhaust Gas Recirculation (EGR) valve control at maximum desired lift. This will help reduce, long crank/start time. Improvements to engine idle quality such as rough idle after high altitude start and stability of engine RPM at idle. Refine MDS transitions with improved slip and torque management
18-055-172018-06-04. Service bulletin. POWER TRAIN. Flash: Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Some customers may experience when staring a cold engine the vehicle has a rough idle and/or the engine will immediately shut off.
21-024-172018-06-04. Service bulletin. POWER TRAIN. Transmission Oil Pan Leaking This bulletin involves inspecting and if necessary resealing the transmission oil pan. Some customers or technicians may experience a transmission oil leak. Upon further investigation, a technician may find the transmission oil pan is leaking in this suspected areaFig. 1.Transmission Oil Pan1 - Suspected Leak Area
90037492018-06-04. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. RA2 Radio 5" Uconnect Before replacing this radio, make sure you can reproduce the customer issue. If the radio is locked up, has a blank screen, or no sound, please perform a vehicle battery reset. If radio functionality is resumed, return the vehicle to the customer. If there are any questions or concerns or the vehicle has been in for repair for the same radio concern more than once, please call Rick Gordon at Cell (248) 630- 6281. If no response in 15 minutes, proceed with repair.
90037422018-06-04. Service bulletin. POWER TRAIN. Gear set If you are working on a 2017 HD truck with axle whine concern and you're replacing the gear set, please call Mark Houy at cell: (248) 961-1826. If no response within 15 minutes, please proceed with the repair.
90034662018-06-04. Service bulletin. ENGINE AND ENGINE COOLING. Rear Crank Shaft Oil Seal and Retainer Plate For Cummins equipped vehicles only; If you are working on a 2016 or 2017 vehicle ONLY and are replacing the Rear Main Seal for oil leak, replace seal, retainer and gasket using PNs; 05086755A$, 05086754A$, 05015705A$. Remove the retainer with the seal installed. Please do not disturb seal in retainer when removing from engine. Please refer to detailed repair instructions in DealerConnect TechConnect for oil seal retainer replacement. Cummins Engineering is currently investigating the root cause of the oil leak concern and would like to analyze these parts. Please contact Chad Eichbrecht at cell (248) 309-2695 to arrange for part return. If you do not receive a response within 15 minutes, please proceed with normal repair.
90033572018-06-04. Service bulletin. ENGINE AND ENGINE COOLING. Pentastar Oil Filter Adapter All vehicles equipped with a 3.2L or 3.6L engine; If replacing the Oil Filter Adapter (OFA) due to a leak detected between OFA and block, an O-ring kit (68191356AA) is now available to repair OFA/Block Interface leaks. Using dye will assist in determining source of leak. Ensure OFA Cap Oring is seated in the proper groove in the cap and not damaged or cut. Engineering is seeking information regarding OFA leaks. Questions/info can be directed to: Bob Jackson Cell (248) 944-0466 - bob.jackson@fcagroup.com Ron Dallison Cell (248-292-9510) ron.dallison@fcagroup.com Joe Lovell Cell (734) 309-6467 - joe.lovell@fcagroup.com If a response is not received within 15 mins, then proceed with the necessary repair.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.