WenmarOpen by Wenmar Pro

Service bulletin 9003466

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10138865
Published by NHTSA2018-06-04
Manufacturer's number9003466
Manufacturer's date2017-06-21
NHTSA componentENGINE AND ENGINE COOLING

NHTSA's summary

Rear Crank Shaft Oil Seal and Retainer Plate For Cummins equipped vehicles only; If you are working on a 2016 or 2017 vehicle ONLY and are replacing the Rear Main Seal for oil leak, replace seal, retainer and gasket using PNs; 05086755A$, 05086754A$, 05015705A$. Remove the retainer with the seal installed. Please do not disturb seal in retainer when removing from engine. Please refer to detailed repair instructions in DealerConnect TechConnect for oil seal retainer replacement. Cummins Engineering is currently investigating the root cause of the oil leak concern and would like to analyze these parts. Please contact Chad Eichbrecht at cell (248) 309-2695 to arrange for part return. If you do not receive a response within 15 minutes, please proceed with normal repair.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Engine

Vehicles listed
RAM 25002016, 2017
RAM 35002016, 2017
RAM 45002016, 2017
RAM 55002016, 2017

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
20182692018-05-17. Engine
20174412017-09-13. Engine
17V5620002017-09-12. ENGINE AND ENGINE COOLING:ENGINE:DIESEL
15V5920002015-09-23. ELECTRICAL SYSTEM:IGNITION:MODULE; ENGINE AND ENGINE COOLING:ENGINE

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
91009232026-09-30. Service bulletin. AIR CLEANER - NONE Instruction to Dealers while ordering the PN# 68137142AD. 1. If the Air Cleaner Assembly is functional and only the MAF Sensor has failed, the dealer should order and replace only the MAF Sensor(68002441AC). 2. If the Air Cleaner Assembly has failed and the MAF Sensor remains functional, the dealer should order the new Air Cleaner Assembly PN(68137142AD) and reuse the existing MAF Sensor(68002441AC) from the failed assembly. 3. If both the Air Cleaner Assembly and the MAF Sensor have failed, the dealer should order both the New Air Cleaner Assembly(68137142AD) and the MAF Sensor(68002441AC) as separate service parts.
1129062026-07-02. Service bulletin. BEARING - CRANKSHAFT THRUST and KIT
1129062026-07-02. Service bulletin. BEARING - CRANKSHAFT THRUST and KIT
67A Rev 4 Combo2024-07-02. Service bulletin. Emission Recall 67A D Truck Engine Calibration
67A Rev 3 Combo2024-06-28. Service bulletin. EMISSION RECALL 67A D Truck Engine Calibration
S1625000004 REV.A2024-06-05. Service bulletin. On Board Diagnosis (OBD) Monitor Readiness Information
983542024-05-31. Other. Valve - EGR
Reference67A2024-03-18. Service bulletin. Emission Recall 67A D Truck Engine Calibration
Reference67A2024-01-16. Service bulletin. Emission Recall 67A - D Truck Engine Calibration
Recall06A2024-01-08. Service bulletin. Emissions Recall 06A - Vehicle Emission Control Information Label