Service bulletin 9003216
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10139976 |
| Published by NHTSA | 2018-06-11 |
| Manufacturer's number | 9003216 |
| Manufacturer's date | 2017-03-08 |
| NHTSA component | VISIBILITY:REARVIEW MIRRORS/DEVICES |
NHTSA's summary
Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full foward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Glass, wipers and mirrors, Mirrors
| RAM 1500 | 2014, 2015, 2016, 2017 |
|---|---|
| RAM 2500 | 2014, 2015, 2016, 2017 |
| RAM 3500 | 2014, 2015, 2016, 2017 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 0809714 | 2023-02-21. Service bulletin. Mirror Tilt In Reverse Feature Is Not Functioning Correctly |
|---|---|
| 9003180 | 2023-01-17. Service bulletin. Part Description: Mirror, Outside Rearview Issue Description: Prior to replacing this part for being loose at the head or pivot, perform the following reset procedure. Using the mirror?s push button on the driver switch panel power fold close and open mirror. If the loose condition exists after performing the reset procedure three times, then replace the mirror as required to fix the vehicle. Inform customer that the intended use of the power fold mirrors is by pushing the button to fold and unfold the mirrors. Please educate the customer of the proper operation of the power folding mirrors. |
| S1623000028RevE | 2022-09-15. Service bulletin. Outside Power Fold Rearview Mirror Noise Or Loose At Pivot |
| 9003216 | 2022-08-08. Service bulletin. Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full foward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together. |
| S2008000090 | 2020-07-27. Service bulletin. The Passenger Exterior Mirror Does Not Auto Dim |
| D-16-28 Rev. A | 2018-06-11. Service bulletin. DAPAP Requirements - Addition of Exterior Mirrors (Rev. A) |
| 5RR541XRA | 2018-06-11. Service bulletin. Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full forward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together. |
| 9003180 | 2018-06-11. Service bulletin. Part Description: Mirror, Outside Rearview Issue Description: Prior to replacing this part for being loose at the head or pivot, perform the following reset procedure. Using the mirror?s push button on the driver switch panel power fold close and open mirror. If the loose condition exists after performing the reset procedure three times, then replace the mirror as required to fix the vehicle. Inform customer that the intended use of the power fold mirrors is by pushing the button to fold and unfold the mirrors. Please educate the customer of the proper operation of the power folding mirrors. |
| 08-097-14 | 2018-06-11. Service bulletin. Mirror Tilt In Reverse Feature Is Not Functioning Correctly This bulletin involves reconfiguring the vehicle for proper mirror tilt in reverse operation. The customer may describe one mirror tilting in reverse and the other mirror not tilting and/or the customer may describe not being able to turn the tilt in reverse feature on/off. |
| 68302824A$ | 2018-06-11. Service bulletin. Auxiliary Lamp, Outside Mirror The Auxiliary Lamp (Puddle Lamp) in the outside rearview mirror has been revised. Ensure it visually matches the Puddle Light on the opposite mirror. If not, both sides will need to be replaced |