Service bulletin S1623000028RevE
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10219960 |
| Published by NHTSA | 2022-09-15 |
| Manufacturer's number | S1623000028RevE |
| Manufacturer's date | 2021-08-13 |
| NHTSA component | VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR |
NHTSA's summary
Outside Power Fold Rearview Mirror Noise Or Loose At Pivot
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Glass, wipers and mirrors, Mirrors
| CHRYSLER PACIFICA | 2017, 2018, 2019, 2020, 2021 |
|---|---|
| RAM 1500 | 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 |
| RAM 2500 | 2013, 2014, 2015, 2016, 2017, 2018, 2019 |
| RAM 3500 | 2017, 2018 |
| RAM 4500 | 2017, 2018 |
| RAM 5500 | 2017, 2018 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 24V754000 | 2024-10-10. VISIBILITY:REARVIEW MIRRORS/DEVICES |
|---|---|
| 20V622000 | 2020-10-08. VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 9100142 | 2023-05-30. Service bulletin. Mirror |
|---|---|
| 0809714 | 2023-02-21. Service bulletin. Mirror Tilt In Reverse Feature Is Not Functioning Correctly |
| 9003180 | 2023-01-17. Service bulletin. Part Description: Mirror, Outside Rearview Issue Description: Prior to replacing this part for being loose at the head or pivot, perform the following reset procedure. Using the mirror?s push button on the driver switch panel power fold close and open mirror. If the loose condition exists after performing the reset procedure three times, then replace the mirror as required to fix the vehicle. Inform customer that the intended use of the power fold mirrors is by pushing the button to fold and unfold the mirrors. Please educate the customer of the proper operation of the power folding mirrors. |
| 9004280 | 2023-01-09. Service bulletin. GLASS, Mirror Replacement Prior to replacing this part for an outside mirror glass that is missing or not present please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair. |
| S2223000070 | 2022-11-07. Service bulletin. Exterior Mirror Lamp Service |
| 9004017 | 2022-09-26. Service bulletin. CAMERA, Rear View For concerns of back up camera flicker/blank/blue/black screen or camera inop, please ensure Radio is at latest software level. After update, system requires three sleep cycles to function properly. Please verify camera LVDS- Low-Voltage Differential Signaling cable connection at camera and radio head unit. Also verify harness connection between high mounted stop lamp and body harness for bent pins or loose connection at XY310A, XY485A inlines. Please create and send a copy of the vehicle scan report and specify radio SW version and radio head unit ID toFCA Redacted Content or call FCA Redacted Content for any additional questions or assistance needed. If no response in 15 minutes, proceed with repair. Please be sure to attach a copy of the Vehicle Scan Report on the repair order. |
| 9003216 | 2022-08-08. Service bulletin. Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full foward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together. |
| 0808621 | 2022-05-31. Service bulletin. Flash: Driver Door Module DDM and Passenger Door Module PDM Updates This bulletin involves reprogramming the DDM and PDM with the latest available software. Customers may notice: Exterior mirrors do not return to the original position after shifting out of reverse gear. Exterior mirrors continue to tilt downwards even after shifting out of reverse gear. For vehicles on the RRT VIN List this software is to improve the function and reliability of the power windows operation. |
| S2123000076 | 2021-12-13. Service bulletin. Both Exterior Mirrors Not Power Folding |
| S2008000090 | 2020-07-27. Service bulletin. The Passenger Exterior Mirror Does Not Auto Dim |