Service bulletin S2008000090
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10177498 |
| Published by NHTSA | 2020-07-27 |
| Manufacturer's number | S2008000090 |
| Manufacturer's date | 2020-06-20 |
| NHTSA component | VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR |
NHTSA's summary
The Passenger Exterior Mirror Does Not Auto Dim
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Glass, wipers and mirrors, Mirrors
| RAM 1500 | 2017, 2018, 2019, 2020 |
|---|---|
| RAM 2500 | 2017, 2018, 2019, 2020 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 24V754000 | 2024-10-10. VISIBILITY:REARVIEW MIRRORS/DEVICES |
|---|---|
| 20V622000 | 2020-10-08. VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 9100142 | 2023-05-30. Service bulletin. Mirror |
|---|---|
| 9004280 | 2023-01-09. Service bulletin. GLASS, Mirror Replacement Prior to replacing this part for an outside mirror glass that is missing or not present please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair. |
| S2223000070 | 2022-11-07. Service bulletin. Exterior Mirror Lamp Service |
| 9004017 | 2022-09-26. Service bulletin. CAMERA, Rear View For concerns of back up camera flicker/blank/blue/black screen or camera inop, please ensure Radio is at latest software level. After update, system requires three sleep cycles to function properly. Please verify camera LVDS- Low-Voltage Differential Signaling cable connection at camera and radio head unit. Also verify harness connection between high mounted stop lamp and body harness for bent pins or loose connection at XY310A, XY485A inlines. Please create and send a copy of the vehicle scan report and specify radio SW version and radio head unit ID toFCA Redacted Content or call FCA Redacted Content for any additional questions or assistance needed. If no response in 15 minutes, proceed with repair. Please be sure to attach a copy of the Vehicle Scan Report on the repair order. |
| S1623000028RevE | 2022-09-15. Service bulletin. Outside Power Fold Rearview Mirror Noise Or Loose At Pivot |
| 9003216 | 2022-08-08. Service bulletin. Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full foward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together. |
| S2123000076 | 2021-12-13. Service bulletin. Both Exterior Mirrors Not Power Folding |
| 23-030-19 | 2019-12-02. Service bulletin. Trailer Tow Mirrors Are Chrome Instead Of Black This bulletin involves inspecting and possibly replacing the trailer tow mirrors. Customers may comment on the following:The trailer tow side mirrors on the vehicles, were built with chrome mirrors and were supposed to have black mirrors. |
| 9004074 | 2019-07-15. Service bulletin. MIRROR, Outside Rearview - w/ Memory If the outside rearview mirror is being replaced for concern of "Mirrors tilt in reverse but do not return to the pre-set position after shifting from reverse". Please turn OFF the mirror tilt feature in the radio screen. Do NOT replace the mirror as it will not correct the issue. A software update is expected in the near future to address this issue. |
| D-16-28 Rev. A | 2018-06-11. Service bulletin. DAPAP Requirements - Addition of Exterior Mirrors (Rev. A) |