WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Ram 1500

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

858 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Automatic transmission are shown. Show all

Bulletins, newest first
S23090000122024-01-16. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. Mil-On/Check Engine Lamp-On with DTC P06DD set in the powertrain control module (PCM).
S23210000092024-01-16. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER. Malfunction Indicator Lamp (MIL) Illuminated. Active Diagnostic Trouble Code (DTC) P1DB7-00 ? Torque Converter Clutch Performance, Set.
18001232024-01-08. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ?**P1524 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. ? P219A - Bank 1 Air-Fuel Ratio Imbalance.** ? U0402-00 Implausible Data Received from the TCM. (When U0402-00 sets in the PCM, the module will start to deny torque requests from the Transmission Control Module (TCM). The transmission will fault and go to a fixed gear limp-inreaction, and send the MIL request to PCM.) The customer may also experence the following: ? A limp mode when the DTC sets in the PCM. This bulletin involves reprogramming the PCM with the latest available software.
18098232024-01-08. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Update Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ?P1524 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. ? P219A - Bank 1 Air-Fuel Ratio Imbalance. This bulletin involves reprogramming the PCM with the latest available software.
S23210000092024-01-08. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). MIL On with TCM P1DB7 Active
18001232023-10-30. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ?**P1524 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. ? P219A - Bank 1 Air-Fuel Ratio Imbalance.** ? U0402-00 Implausible Data Received from the TCM. (When U0402-00 sets in the PCM, the module will start to deny torque requests from the Transmission Control Module (TCM). The transmission will fault and go to a fixed gear limp-inreaction, and send the MIL request to PCM.) The customer may also experence the following: ? A limp mode when the DTC sets in the PCM. This bulletin involves reprogramming the PCM with the latest available software.
18098232023-10-30. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN. Flash: Powertrain Control Module (PCM) Update Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ?P1524 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. ? P219A - Bank 1 Air-Fuel Ratio Imbalance. This bulletin involves reprogramming the PCM with the latest available software.
S23210000092023-10-30. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. MIL On with TCM P1DB7 Active
18085232023-10-02. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software.
S23080001002023-10-02. Service bulletin. STRUCTURE:BODY:HOOD; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Multiple Warning Lights, Sealer Between Ground Stud G908A And Eyelet
18037232023-09-25. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates **Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs have been set: ? P2097 - Downstream Fuel Trim System 1 Rich. ? P2099 - Downstream Fuel Trim System 2 Rich.** The customer may experience the following: ? Lack power/responsiveness for the first couple of minutes or about 90 seconds after a cold start and later performs as expected. This bulletin involves reprogramming the PCM with the latest available software.
S23250000042023-05-30. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. Malfunction Indicator Lamp (MIL) Illuminated. Diagnostic Trouble Code (DTC) P2047 ? Reductant Injector 1/1 Circuit, Set.
18133222023-01-23. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Powertrain Control Module (PCM) Updates
18133222023-01-09. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; FUEL SYSTEM, GASOLINE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P2183 - Engine Coolant Temperature Sensor 2 Circuit Performance. P258B - Electric Vacuum Pump Performance. P040F - EGR Temperature Sensor A-B Correlation. P2D2F - Turbocharger-Supercharger -A- Underboost Condition. P0088 - Fuel Rail Pressure Too High. P026D - Fuel Injection Quantity Higher Than Expected. P208B - Reductant Pump 1 Control Performance. P20C6 - Reductant Heater 4 Control Circuit Performance. P016F - Closed Loop Fuel Pressure Control At Limit - Pressure Too Low. P025C - Fuel Pump Module Control Circuit Low. P225D - NOX Sensor 1/1 Performance - Signal Stuck Low. The following software enhancement is available:DTC U148D - Implausible Data Received From Forward Facing Camera, will be disabled in this software update. The customer may also describe the following:The remote start does not work due to MIL on after using engine block heater.Upon inspection the technician will find DTC P2183 is stored with this condition. In addition, the following driveability improvements are available: Increased tip in and tip out torque response. Low speed engine idle improvements. Eliminate idle oscillation in park and drive. Reduce driveline oscillations. 4-LO speed limiter improvements. Decrease engine start time after extended key on to crank.
S22250000042022-11-07. Service bulletin. FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); UNKNOWN OR OTHER. Customer complaint may include MIL-On/check engine lamp-on condition. Upon further inspection, a DTC for P0456-Small Leak Detected may be set in the PCM.
18133222022-10-31. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P2183 - Engine Coolant Temperature Sensor 2 Circuit Performance. P258B - Electric Vacuum Pump Performance. P040F - EGR Temperature Sensor A-B Correlation. P2D2F - Turbocharger-Supercharger -A- Underboost Condition. P0088 - Fuel Rail Pressure Too High. P026D - Fuel Injection Quantity Higher Than Expected. P208B - Reductant Pump 1 Control Performance. P20C6 - Reductant Heater 4 Control Circuit Performance. P016F - Closed Loop Fuel Pressure Control At Limit - Pressure Too Low. P025C - Fuel Pump Module Control Circuit Low. P225D - NOX Sensor 1/1 Performance - Signal Stuck Low. The following software enhancement is available:DTC U148D - Implausible Data Received From Forward Facing Camera, will be disabled in this software update. The customer may also describe the following:The remote start does not work due to MIL on after using engine block heater.Upon inspection the technician will find DTC P2183 is stored with this condition. In addition, the following driveability improvements are available: Increased tip in and tip out torque response. Low speed engine idle improvements. Eliminate idle oscillation in park and drive. Reduce driveline oscillations. 4-LO speed limiter improvements. Decrease engine start time after extended key on to crank.
18133222022-10-31. Service bulletin. ENGINE AND ENGINE COOLING; EXTERIOR LIGHTING; SERVICE BRAKES, HYDRAULIC; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE; FUEL SYSTEM, GASOLINE; BACK OVER PREVENTION; ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P2183 - Engine Coolant Temperature Sensor 2 Circuit Performance. P258B - Electric Vacuum Pump Performance. P040F - EGR Temperature Sensor A-B Correlation. P2D2F - Turbocharger-Supercharger -A- Underboost Condition. P0088 - Fuel Rail Pressure Too High. P026D - Fuel Injection Quantity Higher Than Expected. P208B - Reductant Pump 1 Control Performance. P20C6 - Reductant Heater 4 Control Circuit Performance. P016F - Closed Loop Fuel Pressure Control At Limit - Pressure Too Low. P025C - Fuel Pump Module Control Circuit Low. P225D - NOX Sensor 1/1 Performance - Signal Stuck Low. The following software enhancement is available:DTC U148D - Implausible Data Received From Forward Facing Camera, will be disabled in this software update. The customer may also describe the following:The remote start does not work due to MIL on after using engine block heater.Upon inspection the technician will find DTC P2183 is stored with this condition. In addition, the following driveability improvements are available: Increased tip in and tip out torque response. Low speed engine idle improvements. Eliminate idle oscillation in park and drive. Reduce driveline oscillations. 4-LO speed limiter improvements. Decrease engine start time after extended key on to crank.
S19250000082022-06-27. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. Malfunction Indicator Lamp (MIL) Illumination. Diagnostic Trouble Codes (DTCs) P208B ? Reductant Pump 1 Control Performance, and/or P20E8 ? Reductant Pressure Too Low, Set.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.