WenmarOpen by Wenmar Pro

Service bulletin S2309000012

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10248869
Published by NHTSA2024-01-16
Manufacturer's numberS2309000012
Manufacturer's date2023-11-09
NHTSA componentPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM

NHTSA's summary

Mil-On/Check Engine Lamp-On with DTC P06DD set in the powertrain control module (PCM).

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Transmission and driveline, Automatic transmission, Transmission control module

Trouble codes named

P06DD

Vehicles listed
JEEP GLADIATOR2022, 2023
JEEP WRANGLER2022, 2023
RAM 15002022, 2023

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
24V4130002024-06-06. POWER TRAIN:MANUAL TRANSMISSION; POWER TRAIN:AUTOMATIC TRANSMISSION
22V6390002022-08-25. POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:PARK PAWL

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
S23210000092024-01-16. Service bulletin. Malfunction Indicator Lamp (MIL) Illuminated. Active Diagnostic Trouble Code (DTC) P1DB7-00 ? Torque Converter Clutch Performance, Set.
18001232024-01-08. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ?**P1524 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. ? P219A - Bank 1 Air-Fuel Ratio Imbalance.** ? U0402-00 Implausible Data Received from the TCM. (When U0402-00 sets in the PCM, the module will start to deny torque requests from the Transmission Control Module (TCM). The transmission will fault and go to a fixed gear limp-inreaction, and send the MIL request to PCM.) The customer may also experence the following: ? A limp mode when the DTC sets in the PCM. This bulletin involves reprogramming the PCM with the latest available software.
18098232024-01-08. Service bulletin. Flash: Powertrain Control Module (PCM) Update Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ?P1524 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. ? P219A - Bank 1 Air-Fuel Ratio Imbalance. This bulletin involves reprogramming the PCM with the latest available software.
18099232024-01-08. Service bulletin. Flash: Powertrain Control Module (PCM) Update Customers may experience the following: ? Poor fuel economy. This bulletin involves reprogramming the PCM with the latest available software.
S23210000092024-01-08. Service bulletin. MIL On with TCM P1DB7 Active
S23080001182024-01-08. Service bulletin. Malfunction Indicator Lamp (MIL) on, P0052, P0152, O2 Sensor High, P0113 Intake Air Sensor (IAT)
S23210000052024-01-08. Service bulletin. Transmission Fluid Leak From Under The Vehicle.
NotificationZ602024-01-02. Service bulletin. Customer Satisfaction Notification Z60 Powertrain Control Module Software
18001232023-10-30. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ?**P1524 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. ? P219A - Bank 1 Air-Fuel Ratio Imbalance.** ? U0402-00 Implausible Data Received from the TCM. (When U0402-00 sets in the PCM, the module will start to deny torque requests from the Transmission Control Module (TCM). The transmission will fault and go to a fixed gear limp-inreaction, and send the MIL request to PCM.) The customer may also experence the following: ? A limp mode when the DTC sets in the PCM. This bulletin involves reprogramming the PCM with the latest available software.
18098232023-10-30. Service bulletin. Flash: Powertrain Control Module (PCM) Update Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ?P1524 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. ? P219A - Bank 1 Air-Fuel Ratio Imbalance. This bulletin involves reprogramming the PCM with the latest available software.