WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Ram 1500

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

472 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Backup camera are shown. Show all

Bulletins, newest first
1032892025-03-04. Service bulletin. BACK OVER PREVENTION: WARNINGS; LANE DEPARTURE: BLIND SPOT DETECTION. CAMERA - REAR VIEW
S20250000012024-01-02. Service bulletin. EXTERIOR LIGHTING; BACK OVER PREVENTION. Malfunction Indicator Lamp Illumination (MIL). Diagnostic Trouble Code (DTC) P203E ? Reductant Level Sensor 1 Circuit Intermittent-Erratic Set.
90033572024-01-02. Service bulletin. BACK OVER PREVENTION. ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
S20250000012023-04-17. Service bulletin. BACK OVER PREVENTION; EXTERIOR LIGHTING. Malfunction Indicator Lamp Illumination (MIL). Diagnostic Trouble Code (DTC) P203E ? Reductant Level Sensor 1 Circuit Intermittent-Erratic Set.
S1623000028 Rev.2023-02-13. Service bulletin. VEHICLE SPEED CONTROL; BACK OVER PREVENTION; POWER TRAIN; VISIBILITY; PARKING BRAKE. Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
08053172022-10-31. Service bulletin. EQUIPMENT:ELECTRICAL; BACK OVER PREVENTION:DISPLAY FUNCTION. RA3 and RA4 Radio Enhancements This bulletin involves inspecting and if required, updating the radio software. Customers may experience one or more of the following:Radio functions/touchscreen locks up (does not affect backup camera). Phone presets do not save. ?Navigation Failed? message is displayed. Navigation is inoperative or inaccurate. CD player will not play songs and/or locks up the radio. Clock will not automatically update to local time. Clock may be off by several hours. (RA3 only). Poor or no connection to cellular network. ?Charge Complete? notification is not received (RU PHEV only). Some Uconnect® App remote commands do not execute with the vehicle. Radio Apps are inoperative. Radio display screen is black or blank. Battery drain - due to radio staying on. Navigation failed message is displayed. Clock not automatically updating to local time. Improvements:Auto Play can now be configured. Media devices, Phone pairing and Bluetooth® usage improvements. Add the ability to drag and drop icons into the menu bar. Adds ?Do Not Disturb? text message feature. Fix for radio locks up/frozen. Fix for radio loses time. Enhanced Voice recognition (VR) performance. Media devices, phone pairing and Bluetooth usage improvements. Improved tuner performance. Human Machine Interface (HMI) improvements. Satellite radio reception improvements.
90037182022-10-31. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. Rear View Camera In the case for inoperative camera, radio screen is blue or black in reverse mode. Before proceeding with the normal procedure call Ali Ikram at (248) 576-9265 Mon- Fri between 8 am - 4pm. If you do not get a response within 15 minutes continue with the normal diagnostic procedure. Before replacing the camera, please disconnect and clean harness and camera connector. Clean & dry both connectors. If replacing the camera, please replace wire harness also and return parts to QEC.
21038172022-10-24. Service bulletin. BACK OVER PREVENTION; SUSPENSION; WHEELS; POWER TRAIN. Tighten Transmission Extension Housing Bolts This bulletin involves tightening the fasteners extension housing bolts to propertorque. Some customers may experience noise and vibration in vehicle. This is due to improperly torqued transmission extension housing attachmentbolts.
90037642022-10-24. Service bulletin. BACK OVER PREVENTION; STEERING. Brake Booster If replacing booster for squeak, click, or pop noise when applying brake pedal, please attempt greasing interface between brake pedal pin and brake booster eyelet. Use a general all-purpose grease such as MS-4178 used on steering linkages.
S20250000012022-10-17. Service bulletin. EXTERIOR LIGHTING; BACK OVER PREVENTION. (Rev. B) Malfunction Indicator Lamp Illumination (MIL). Diagnostic Trouble Code (DTC) P203E ? Reductant Level Sensor 1 Circuit Intermittent-Erratic Set.
90037042022-09-26. Service bulletin. SEATS; FUEL SYSTEM, GASOLINE; AIR BAGS; POWER TRAIN; BACK OVER PREVENTION; ENGINE AND ENGINE COOLING. Transmission Oil Pan, Heater (TMU), Tube or O-ring Applies to vehicles equipped with 8 speed transmissions only; if you have a leak that appears to be at the pan the use of proper leak detection is recommended. The fluid in the 8 speeds can be detected with a black light and there are aftermarket spray on leak detection materials to help ensure that the leak is properly diagnosed and not from another location such as cooler lines, heater tubes, or case porosity. Please note that the transmission pan gasket is available for many of the 8 speed applications FCA offers. Please review the available quick connect and transfer tube parts, as replacement of the TMU may not be required. If a TOC line connection is found to be the source, the quick connect may need replacement. If the leak source is coming from the connection of the TMU to the transmission, the transfer tube may need replacement. When parts are returned to the QEC the retaining clips (snap ring) for the quick disconnect fittings are missing. (This leaves a question as to whether the clips were missing from the assembly plant, or the technician removed them in order to make line removal easier.) Please return the clips with the transmission heater and note if they were not there to begin with. For any questions regarding transmission heater, contact FCA Redacted Content. If no response in 15 minutes, proceed with repair.
S21230000112022-09-26. Service bulletin. BACK OVER PREVENTION. Rattle Tapping Fluttering Noise From A Pillar Or Dash Driving At Highway Speeds
90036292022-09-15. Service bulletin. BACK OVER PREVENTION. Rear View Camera For trucks equipped with rear view camera part number 68274731AD, if it has been brought to the dealership due to a customer complaint of the rear view camera image being too dark or hard to see, or is exhibiting the issue while in for unrelated service, the issue resides in the rear view camera and NOT the radio screen or mirror (depending on vehicle content available), or corresponding wiring. Issues with a fully black screen or a blue screen are separate from this issue and therefore this Tech Tip does not apply. Updated cameras with part number 68274731AE will correct the complaint.
14-007-212022-08-22. Service bulletin. FUEL SYSTEM, GASOLINE; BACK OVER PREVENTION; EXTERIOR LIGHTING; FUEL SYSTEM, DIESEL; WHEELS. 3.0L Diesel Crankshaft Tone Wheel Loss of Signal - X94 Warranty Extension This bulletin involves replacing the crankshaft tone wheel. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P0335-00 - Crankshaft Position Sensor Circuit. P0336-00 - Crankshaft Position Sensor Performance. Customers may also comment on one or more of the following: The vehicle will not accelerate quickly over 80 kph (50 mph) (vehicle is in limp mode). Vehicle periodically stalls.This symptom/condition is caused from missing magnetic material on the crankshaft tone wheel
90030592022-08-08. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM. Park Assist Sensor 1) Active or Stored DTC of Signal Shape / Waveform Failure fault: B128E-25, B128F-25, B1290-25, B1291-25, B1292-25, B1293-25, B1295-25, B1296-25, B1297-25, and/or B1298-25, check for snow/mud/ice/obstruction and clean the Sensors, both front and back (behind bumper) of sensor. The snow/mud/ice can be behind the bumper, sensor retainer and/or the sensor which may cause customers to think they have an issue since they cleaned the front of the sensor/bumper, but not behind where dirt/mud/ice snow can accumulate. Once the Bumper and Sensors are completely cleaned and clear of snow, mud, ice, and/or obstruction, the sensors must activate in order for the faults to go STORED. After cleaning the Bumper and Sensors, turn off the engine, wait 10 seconds, turn on the engine and then place the vehicle in REVERSE so that the sensors activate. The faults will go STORED. 2) Active or Stored DTC code of Short to Ground fault: B128E-11, B128F-11, B1290-11, B1291-11, B1292-11, B1293-11, B1294-11, B1295-11, B1296-11, and/or B1298-11, or if you have an active or stored DTC code of Performance or Incorrect Operation fault: B128E-92, B128F-92, B1290-92, B1291-92, B1293-92, B1294-92, B1295-92, B1296-92, B1297-92, and/or B1298-92, then check the wiring behind the sensor. Specifically, ensure that the connector behind the park assist sensor is fully mounted. Ensure also, there is no dirt, corrosion, or damage in this connector behind the park assist sensor as this will also cause a Short to Ground fault. With potential wiring issues addressed, the sensors must activate in order for the faults to go STORED. After all sensors are properly connected (you will likely hear a click once the connector is fully seated on the sensor), turn off the engine, wait 10 seconds, turn on the engine and then place the vehicle in REVERSE so that the sensors activate. The faults will go STORED.
90038092022-08-08. Service bulletin. POWER TRAIN; BACK OVER PREVENTION. Pinion Bearing Customer complaint of growling/groaning/grinding noise (not whine) from rear axle. Inspect pinion bearings for spalling. If spalling is found, replace the axle assembly without removing bearing cup from the housing. Please contact Ashley Gerebics at cell: (248) 472-6524 to arrange fast tracking of the axle to FCA. If no response in 15 minutes, proceed with repair.
S20250000012020-04-27. Service bulletin. EXTERIOR LIGHTING; BACK OVER PREVENTION. Malfunction Indicator Lamp Illumination (MIL). Diagnostic Trouble Code (DTC) P203E ? Reductant Level Sensor 1 Circuit Intermittent-Erratic Set.
S20230000142020-04-27. Service bulletin. BACK OVER PREVENTION. Single Pop Noise From Rear Of Sunroof While Opening
90036292018-06-04. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. Rear View Camera For trucks equipped with rear view camera part number 68274731AD, if it has been brought to the dealership due to a customer complaint of the rear view camera image being too dark or hard to see, or is exhibiting the issue while in for unrelated service, the issue resides in the rear view camera and NOT the radio screen or mirror (depending on vehicle content available), or corresponding wiring. Issues with a fully black screen or a blue screen are separate from this issue and therefore this Tech Tip does not apply. Updated cameras with part number 68274731AE will correct the complaint.
90036362017-11-03. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. Rear View Camera For trucks equipped with rear view camera part number 68274731A$, if there is a complaint of the rear view camera being inoperative, or the radio screen is black or blue when the truck is in reverse, DO NOT replace the rear camera or perform any repairs until attempting to contact Michael Talbert in Engineering Cell (248) 464- 2043, Monday - Friday between 8am - 7pm EST. If your call is not returned within 15 minutes, proceed with the normal diagnostic process
90036292017-11-03. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. Rear View Camera For trucks equipped with rear view camera part number 68274731AD, if it has been brought to the dealership due to a customer complaint of the rear view camera image being too dark or hard to see, or is exhibiting the issue while in for unrelated service, the issue resides in the rear view camera and NOT the radio screen or mirror (depending on vehicle content available), or corresponding wiring. Issues with a fully black screen or a blue screen are separate from this issue and therefore this Tech Tip does not apply. DO NOT replace the radio (part numbers 68271367A$, 68271368A$, 68271364A$, 68270657A$, 68270658A$, 68270659A$, 68270661A$, 68270662A$, 68270663A$, 68270664A$, or 68270665A$) or mirror (part number 68104884A$) to attempt to correct the dark image issue. Updated cameras with part number 68274731AE will correct the complaint.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.