Service bulletins for the 2017 Ram 1500
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
472 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: EGR valve are shown. Show all
| 18-068-20 | 2020-09-28. Service bulletin. EQUIPMENT; POWER TRAIN; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE); ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set:P1D30-00 - Oil Viscosity Too Low. Attempting to clear the DTC will be unsuccessful. P2453-00 - Diesel Particulate Filter Differential Pressure Sensor Circuit Performance. P0401-00 - EGR Flow Insufficient Detected. P0133-00 - O2 Sensor 1/1 Slow Response. P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. P050E-00 - Cold Start Engine Exhaust Temperature Too Low. P0299-00 - Turbocharger Underboost Condition. P0402-00 - EGR Flow Excessive Detected. P245B - EGR Cooler Bypass Control Circuit Performance. P20C6 - Reductant Heater 4 Control Circuit Performance. P208B - Reductant Pump 1 Control Performance. P249C - Excessive Time To Enter Closed Loop Reductant Injection Control. P20E8-00 - Reductant Pressure Too Low. P20E9-00 - Reductant Pressure Too High. In addition, the following software enhancement is available:Ability to enable the ?Fuel System Cleaning? routine in wiTECH. |
|---|---|
| 9003638 | 2017-11-03. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE). Fuel Tank Issue Description: Ram 1500 built between 7/1/16 and 8/15/16 with concern of "hard to fill" or "premature shut off", please remove the Canister line and Recirculation Line and retest. If the condition continues, tank replacement may be required. Please reference the proper diagnostic materials. Answers to the following questions can assist Engineering in their quality improvements: 1) At what level of fuel in the Tank does the Hard to Fill condition exist? 2) When did the customer start experiencing Hard to Fill condition? 3) Did the condition exist in a particular fuel station? If tank replacement is needed, please contact Sylvia Lopez at Cell (248) 520-9734 prior to replacing the Tank. She will help arrange shipment of the tank back to the Quality Engineering Center. If no response within 15 minutes proceed with repairs |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.