WenmarOpen by Wenmar Pro

Service bulletins for the 2014 Ram 1500

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

615 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
309282018-06-11. Service bulletin. VISIBILITY:WINDSHIELD. 55395241AG Weatherseal - Windshield to Cowl Please return allstock of following part numbers:55395241AG,55395241AE.Replacement ispart number 55395241AH which isin stock and available. Please return suspect partsback toyour facing depot using Return Code 02,before 12April,2017
308652018-06-11. Service bulletin. LATCHES/LOCKS/LINKAGES:HATCHBACK/LIFTGATE:LOCK; STRUCTURE:BODY:HATCHBACK/LIFTGATE. 04589131AG, 04589243AG - Inspect and Return: Liftgate - Latch Assy You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 04589131AG, 04589243AG . See attachments for identifying suspect stock. Replacement part can be obtained by reordering the same part number. Please return suspect parts back to your facing depot using Return Code 02, before 7 April, 2016.
306572018-06-11. Service bulletin. ELECTRICAL SYSTEM. R4801865AC Alternator Assy - 220 Amp You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of part number R4801865AC. Replacement is part number 04801865AE which is in stock and available. Please return suspect parts back to your facing depot using Return Code 02, before 04 April, 2017.
90030592018-06-11. Service bulletin. EQUIPMENT:ELECTRICAL. Park Assist Sensor 1) Active or Stored DTC of Signal Shape / Waveform Failure fault: B128E-25, B128F-25, B1290-25, B1291-25, B1292-25, B1293-25, B1295-25, B1296-25, B1297-25, and/or B1298-25, check for snow/mud/ice/obstruction and clean the Sensors, both front and back (behind bumper) of sensor. The snow/mud/ice can be behind the bumper, sensor retainer and/or the sensor which may cause customers to think they have an issue since they cleaned the front of the sensor/bumper, but not behind where dirt/mud/ice snow can accumulate. Once the Bumper and Sensors are completely cleaned and clear of snow, mud, ice, and/or obstruction, the sensors must activate in order for the faults to go STORED. After cleaning the Bumper and Sensors, turn off the engine, wait 10 seconds, turn on the engine and then place the vehicle in REVERSE so that the sensors activate. The faults will go STORED. 2) Active or Stored DTC code of Short to Ground fault: B128E-11, B128F-11, B1290-11, B1291-11, B1292-11, B1293-11, B1294-11, B1295-11, B1296-11, and/or B1298-11, or if you have an active or stored DTC code of Performance or Incorrect Operation fault: B128E-92, B128F-92, B1290-92, B1291-92, B1293-92, B1294-92, B1295-92, B1296-92, B1297-92, and/or B1298-92, then check the wiring behind the sensor. Specifically, ensure that the connector behind the park assist sensor is fully mounted. Ensure also, there is no dirt, corrosion, or damage in this connector behind the park assist sensor as this will also cause a Short to Ground fault. With potential wiring issues addressed, the sensors must activate in order for the faults to go STORED. After all sensors are properly connected (you will likely hear a click once the connector is fully seated on the sensor), turn off the engine, wait 10 seconds, turn on the engine and then place the vehicle in REVERSE so that the sensors activate. The faults will go STORED.
90036942018-06-11. Service bulletin. ENGINE AND ENGINE COOLING. Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system
90036812018-06-11. Service bulletin. SEAT BELTS. Restraints Information Sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
90036872018-06-11. Service bulletin. SEAT BELTS. Restraints Remove I-Sheet from packaging. Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
90032162018-06-11. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES. Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full foward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together.
68277402A2018-06-11. Service bulletin. VEHICLE SPEED CONTROL:CRUISE CONTROL. Adaptive Cruise Control Sensor 1) If you are replacing this part due to the cluster displaying Clean Radar Sensor in Front of Vehicle or DTC C1266 ACC Sensor Blinded, please verify that there is no blockage in front of the sensor. Blockage can occur from mud, ice, snow, front end damage, bracket damage, the sensor not attached to the bracket properly or an aftermarket fascia installed. This fault can occur intermittently in muddy or icy/snowy conditions and is considered normal operation. Under some circumstances, a misaligned sensor can also cause the C1266 DTC, please complete an alignment procedure. No replacement is required.~ 2) If you are replacing this part due to the cluster displaying ?ACC/FCW Unavailable Service Required?, please check the DTC fault codes. This will indicate which module needs to be serviced (TCM, PCM, ESP/ABS, etc). This fault is not due to the ACC Sensor. No sensor replacement is required.~ 3) If you have fault code DTC C125E ACC Sensor Adjustment Required, please verify that the radar sensor is fully seated in the clips and there is no damage (if clips are damaged on a 2013 or earlier vehicle, order P/N 68085813A$, otherwise please replace the module), please verify there is no blockage to the sensor due to mud, ice, snow, front end damage, bracket damage or the sensor not attached to the bracket properly. Perform the Vertical Alignment and the Electronic Horizontal Alignments procedure as stated in the service manual. Please note, if the horizontal alignment procedure will not complete, check the vertical alignment and confirm that the sensor is seated properly. Rerun the horizontal alignment procedure. No sensor replacement is required. **Hints for running Horizontal Alignment procedure: A) Verify speed is between 45 and 75 mph, B) verify the road is relatively straight with signs, poles, guard rails, etc C) Do not tail a vehicle too closely this inhibits the learning procedure
68105583A2018-06-11. Service bulletin. ENGINE AND ENGINE COOLING. Pentastar Oil Filter Adapter: Before replacing this part, please call any one of the following people. Engineering is seeking information regarding this part.~ Dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated Service Bulletin Number 09-008-15. ~ First: Nick Morand Cell (248) 410-8078 - Nick.morand@fcagroup.com Second: Bob Jackson Cell (248) 944-0466 - bob.jackson@fcagroup.com Third: Joe Lovell Cell (734 309-6467 - joe.lovell@fcagroup.com If a response is not received within 15 mins, then proceed with the necessary repair.~
5RR541XRA2018-06-11. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES. Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full forward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together.
18-028-14 REV. D2018-06-11. Service bulletin. ENGINE AND ENGINE COOLING. Flash: MIL Illumination - Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. It also involves replacement of the Oxygen (O2) Sensor and cleaning or replacement of the Exhaust Gas Temperature (EGT) Sensor 1/2 if necessary depending on Diagnostic Trouble Codes (DTC) that may have set. A small number of customers may experience an intermittent engine shudder or vibration which may not set a Diagnostic Trouble Code (DTC). In addition other customers may experience a Malfunction Indicator Lamp (MIL) illumination upon which the technician may find one or more of the following DTCs have been set: P016A-00 - Excessive Time To Enter Closed Loop Air/Fuel Ratio Control. P2459-00 - Diesel Particulate Filter Regeneration Frequency P0133-00 - O2 Sensor 1/1 Slow Response P2084-00 - Exhaust Gas Temperature Sensor Circuit Performance - (1/2) P0171-00 - Fuel System 1/1 Lean P0426-00 - Catalyst Temperature Sensor Circuit Performance (1/1) P0045-00 - Turbocharger Boost Control Circuit/Open P0087-00 - Fuel Rail Pressure Too Low P009A-00 - Intake Air Temperature/Ambient Air Temperature Correlation P0128-00 - Thermostat Rationality P0234-00 - Turbocharger Overboost Condition P0420-00 - Catalyst Efficiency (Bank 1) P05F8-00 - Reductant Heater Control Module Performance P050E-00 - Cold Start Engine Exhaust Temperature Too Low P200A-00 - Intake Manifold Runner Performance - (Bank 1) P200B-00 - Intake Manifold Runner Performance - (Bank 2) P202E-00 - Reductant Injection Valve Circuit Performance P204F-00 - Reductant System Performance P2080-00 - Exhaust Gas Temperature Sensor Circuit Performance P20BA-00 - Reductant Heater 1 Control Circuit Performance P20BE-00 - Reductant Pressure Line Heater Control Circuit Performance P20C2-00 - Reductant Heater 3 Control Circuit Performance P20E9-00 - Reductant Pressure Too High P225C-00 - NOX Sensor 1/1 Performance - Signal Stuck High
18-025-14 REV. A2018-06-11. Service bulletin. POWER TRAIN. Flash: Powertrain System Improvements/Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. The following powertrain system improvements/enhancements are included in this software release. These enhancements are listed by vehicle application.DS vehicles equipped with a 3.6L engine (sales code ERB). Enhanced Automatic Oil Change Indicator(EAOCI) system improvements to switch to a severe duty cycle algorithm anytime the PCM is replaced to ensure the customer receives a timely oil change required message. Corrected a generic scan tool display issue regarding Mode 6 data accuracy.DS vehicles equipped with a 5.7L engine (sales code EZH). Charging system voltage regulator control improvements. System improvements to prevent Malfunction Indicator Lamp (MIL) illumination with a Diagnostic Trouble Code (DTC) P0300 - Multiple Cylinder Misfire when using a block heater in ambient temperatures greater than -20°F (-29°C). Enhanced Automatic Oil Change Indicator(EAOCI) system improvements to switch to a severe duty cycle algorithm anytime the PCM is replaced to ensure the customer receives a timely oil change required message. Corrected a generic scan tool display issue regarding Mode 6 data accuracy.DJ, DD, and D2 vehicles equipped with a 5.7L engine (sales code EZC) Transmission torque management enhancement when shifting from drive to reverse. Software to correct Malfunction Indicator Lamp (MIL) illumination with Diagnostic Trouble Code (DTC) P0481 - Cooling Fan 2 Control Circuit/Open setting in the PCM memory. Enhanced Automatic Oil Change Indicator(EAOCI) system improvements to switch to a severe duty cycle algorithm anytime the PCM is replaced to ensure the customer receives a timely oil change required message. Corrected a generic scan tool display issue regarding Mode 6 data accuracy. Improved transmission Quick Learn routine performance
21-003-14 REV. A2018-06-11. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM:SOFTWARE. Flash: 845RE Transmission Shift Enhancements, 2-1 Downshift This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. The following TCM calibration improvements are available for vehicles equipped an 845RE Automatic Transmission (Sales Code DFL). These updates are listed by vehicle and engine.LD and LX vehicles equipped with a 3.6L engine (Sales Code ERB) Software to correct a harsh bump feel during a 2-1 downshift. Software to enable the scan tool based transmission ?Quick Learn.? Software to address customer concerns of Malfunction Indicator Lamp (MIL) illumination and Diagnostic Trouble Code (DTC) P215C Output Shaft Speed, Wheel Speed Correlation setting on AWD equipped vehicles.LX and WK vehicles equipped with a 3.0L engine (Sales Code EHD) Software to correct a harsh bump feel during a 2-1 downshift.WK vehicles equipped with a 3.6L engine (Sales Code ERB) Software to correct a harsh bump feel during a 2-1 downshift.DS vehicles equipped with 3.6L engine (Sales Code ERB) Software to correct a harsh bump feel during a 2-1 downshift. Software to address a customer?s concern of less than desired shift quality in Four Wheel Drive (4wd) Low mode during medium to heavy acceleration. Software to address customer concerns of Malfunction Indicator Lamp (MIL) illumination and Diagnostic Trouble Code (DTC) P215C Output Shaft Speed, Wheel Speed Correlation setting on AWD equipped vehicles. Software improvements to powertrain braking in Tow/Haul mode. Software to improve downshift response from a medium to heavy pedal acceleration. Driveability improvements at higher altitudes. Software to improve acceleration during cruise control operation Software to correct a condition where DTC U11C3 - ESM Lost Communication With TCM On D-Pt CAN may have been displayed instead of U11E3 - TCM Lost communication with ESM On D-PT CAN.WD vehicles equipped with a 3.6L engine (Sales Code ERB)
18-045-142018-06-11. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. P20EE SCR NOX Catalyst Efficiency Below Threshold Bank 1 This bulletin involves verifying the proper operation of the Diesel Exhaust Fluid (DEF) system and, if necessary, replacing the Selective Catalyst Reduction (SCR) Catalyst assembly. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find Diagnostic Trouble Code (DTC) P20EE SCR NOX Catalyst Efficiency Below Threshold Bank 1 set in the Powertrain Control Module (PCM) memory..
08-097-142018-06-11. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES. Mirror Tilt In Reverse Feature Is Not Functioning Correctly This bulletin involves reconfiguring the vehicle for proper mirror tilt in reverse operation. The customer may describe one mirror tilting in reverse and the other mirror not tilting and/or the customer may describe not being able to turn the tilt in reverse feature on/off.
68302824A$2018-06-11. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES. Auxiliary Lamp, Outside Mirror The Auxiliary Lamp (Puddle Lamp) in the outside rearview mirror has been revised. Ensure it visually matches the Puddle Light on the opposite mirror. If not, both sides will need to be replaced
55372070A$2018-06-11. Service bulletin. EXTERIOR LIGHTING:TURN SIGNAL. Mirror, Outside Rearview Replacement outside rearview mirror assembly comes equipped with Turn Signal and Auxiliary (Puddle) Light. If Turn Signal/Puddle Lamp is visually different from OE, you will need to swap the original lamp to the new mirror unit.
08-021-14 REV. C2018-06-11. Service bulletin. PARKING BRAKE; SEATS; STEERING; ELECTRICAL SYSTEM; BACK OVER PREVENTION; WHEELS. RG3 RG4 RJ3 RJ4 Radio Enhancements This bulletin involves inspecting and updating the radio software, if required. DAB (Digital Audio Broadcast) is inoperative. Wrong routing for addresses with a longitude between 0 and -1 degrees. Speed Camera UK & Spain complaining that the speed camera feature was not available with the latest MY14 software. DAB preset list on the top of the screen doesn't change while scrolling with steering controls. Rear view camera jitter. Tuner reception software enhancements. HVAC temperature control enhancements. SRT soft button missing for radios when vehicle is equipped with SRT feature (EMEA /LATAM markets only). Battery drain due to the radio and cluster back-lighting staying on. Postal Code smart speller logic enhancements (EMEA markets only). AM/FM steering wheel mode switch button not working (LATAM markets only). Navigation Lockout Disable while vehicle is in motion (EMEA markets only). Removed network status indicators for SRT/APPS. Voice Recognition (VR) says 'cancel' when starting (App) applications. iPod would not resume playing after a VR session or phone call. Removed the cell signal indicators in the SRT and Apps button on non-US vehicles. rear camera may show a black screen for 3 seconds upon going to reverse. Navigation would not start or would lose position. Removal of parental control under Apps menu. Turn by Turn navigation in the cluster set to ON by default. Transfer button does not pick-up and transfer incoming call. Some Russian letters are caps when they should be lower-case. Touch screen locks up in navigation, when Russian is selected. Address search availably when the vehicle is moving (EMEA markets only). VR messages in Spanish talks to fast. Recognition enhancement for Russian VR. Hands free audio too low for non-amp vehicle (KL). Intermittently Registration expired pop-up appears on display screen. Arabic language for navigation only, not the keyboard (RJ3 RJ4 radio only). Incorrect time to destination
21-030-14 REV. A2018-06-11. Service bulletin. POWER TRAIN. 845RE Transmission Quick Learn Procedure This bulletin provides information on how to perform the new scan tool based transmission Quick Learn procedure. This procedure is required after certain transmission repairs or to improve a customer's concern of poor shift quality. Customers may indicate that their transmission shift quality does not meet their expectations.
18-028-14 REV. C2018-06-11. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Flash: MIL Illumination - Diagnostic and System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. It also involves replacement of the Oxygen (O2) Sensor and cleaning or replacement of the Exhaust Gas Temperature (EGT) Sensor 1/2 if necessary depending on codes that have set. A small number of customers may experience an intermittent engine shudder or vibration which may not set a Diagnostic Trouble Code (DTC). In addition other customers may experience a Malfunction Indicator Lamp (MIL) illumination upon which the technician may find one or more of the following DTCs have been set: ? P2459-00 - Diesel Particulate Filter Regeneration Frequency. ? P0133-00 - O2 Sensor 1/1 Slow Response. ? P2084-00 - Exhaust Gas Temperature Sensor Circuit Performance - (1/2). ? P0171-00 - Fuel System 1/1 Lean. ? P0426-00 - Catalyst Temperature Sensor Circuit Performance (1/1). ? P0045-00 - Turbocharger Boost Control Circuit/Open. ? P0087-00 - Fuel Rail Pressure Too Low. ? P009A-00 - Intake Air Temperature/Ambient Air Temperature Correlation. ? P0128-00 - Thermostat Rationality. ? P0234-00 - Turbocharger Overboost Condition. ? P0420-00 - Catalyst Efficiency (Bank 1). ? P05F8-00 - Reductant Heater Control Module Performance. ? P050E-00 - Cold Start Engine Exhaust Temperature Too Low. ? P200A-00 - Intake Manifold Runner Performance - (Bank 1). ? P200B-00 - Intake Manifold Runner Performance - (Bank 2). ? P202E-00 - Reductant Injection Valve Circuit Performance. ? P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. ? P204F-00 - Reductant System Performance. ? P2080-00 - Exhaust Gas Temperature Sensor Circuit Performance. ? P20BA-00 - Reductant Heater 1 Control Circuit Performance. ? P20BE-00 - Reductant Pressure Line Heater Control Circuit Performance. ? P20C2-00 - Reductant Heater 3 Control Circuit Performance. ? P20E9-00 - Reductant Pressure Too High.
18-054-142018-06-11. Service bulletin. ENGINE AND ENGINE COOLING. Intermittent Extended Crank, Long Crank Time. This bulletin involves inspecting the Bank 1 Camshaft Position Sensor serial number and if necessary, replacing the sensor. A small number of customers may experience an intermittent 1 to 5 second extended crank condition when starting their vehicle. No DTCs will be present when this occurs.
08-088-142018-06-11. Service bulletin. EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES. Law Enforcement Theft Alarm Inoperative This bulletin involves reconfiguring the vehicle for proper theft alarm operation. The customer may notice that the theft alarm feature is inoperative.
18-028-14 REV. B2018-06-11. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Flash: MIL Illumination - Diagnostic and System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. It also involves replacement of the Oxygen (O2) Sensor and cleaning or replacement of the Exhaust Gas Temperature (EGT) Sensor 1/2 if necessary depending on codes that have set. A small number of customers may experience an intermittent engine shudder or vibration which may not set a Diagnostic Trouble Code (DTC). In addition other customers may experience a Malfunction Indicator Lamp (MIL) illumination upon which the technician may find one or more of the following DTCs have been set: ? P2459-00 - Diesel Particulate Filter Regeneration Frequency. ? P0133-00 - O2 Sensor 1/1 Slow Response. ? P2084-00 - Exhaust Gas Temperature Sensor Circuit Performance - (1/2). ? P0171-00 - Fuel System 1/1 Lean. ? P0426-00 - Catalyst Temperature Sensor Circuit Performance (1/1). ? P0045-00 - Turbocharger Boost Control Circuit/Open. ? P0087-00 - Fuel Rail Pressure Too Low. ? P009A-00 - Intake Air Temperature/Ambient Air Temperature Correlation. ? P0128-00 - Thermostat Rationality. ? P0234-00 - Turbocharger Overboost Condition. ? P0420-00 - Catalyst Efficiency (Bank 1). ? P05F8-00 - Reductant Heater Control Module Performance. ? P050E-00 - Cold Start Engine Exhaust Temperature Too Low. ? P200A-00 - Intake Manifold Runner Performance - (Bank 1). ? P200B-00 - Intake Manifold Runner Performance - (Bank 2). ? P202E-00 - Reductant Injection Valve Circuit Performance. ? P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. ? P204F-00 - Reductant System Performance. ? P2080-00 - Exhaust Gas Temperature Sensor Circuit Performance. ? P20BA-00 - Reductant Heater 1 Control Circuit Performance. ? P20BE-00 - Reductant Pressure Line Heater Control Circuit Performance. ? P20C2-00 - Reductant Heater 3 Control Circuit Performance. ? P20E9-00 - Reductant Pressure Too High.
21-030-142018-06-11. Service bulletin. POWER TRAIN. 845RE Transmission Quick Learn Procedure This bulletin provides information on how to perform the new scan tool based transmission Quick Learn procedure. This procedure is required after certain transmission repairs or to remedy a customer?s concern of poor shift quality. Customers may indicate that their transmission shift quality does not meet their expectations.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.