WenmarOpen by Wenmar Pro

Service bulletins for the 2016 Nissan Titan

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

304 on file from NHTSA, as of 2026-10-19.

About P226C on the 2016 Nissan Titan: what the code means, and the bulletins and recalls about the same components.

By type

By component

By trouble code

By topic

Only bulletins with trouble code: P226C are shown. Show all

Bulletins, newest first
NTB20-0712020-11-09. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. 2016-2019 TITAN XD DIESEL; MIL ON WITH DTC P226C STORED IF YOU CONFIRM The MIL is ON and DTC P226C (TC BOOST CONTROL SLOW RESPONSE) IS stored, And DTC P00AF (BOOST PRESSURE CONTROL) is NOT stored in the ECM, And Binding and/or resistance is observed when the rotary turbine control valve is moved from one stop to the other (full span), by hand. NOTE: Disconnect the linkage at the actuator to move the rotary control valve. ACTION Replace the low pressure turbocharger.
NTB16-095a2017-08-25. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. 2016 TITAN XD; MIL ON WITH DTC P226C OR P0471 WHEN OPERATED AT OR BELOW 32°F (0°C) This bulletin applies only to vehicles equipped with a Cummins 5.0L V8 Diesel engine. This bulletin has been amended. IF YOU CONFIRM section was updated. No other changes were made. Please discard all previous versions of this bulletin.
NTB16-0952017-08-01. Service bulletin. EQUIPMENT:ELECTRICAL; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL; ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. 2016 TITAN XD; MIL ON WITH DTC P226C OR P0471 IF YOU CONFIRM One or both of the following DTCs are stored: - P226C (Turbocharger Boost Control Slow Response) - P0471 (Exhaust Pressure Sensor "A" Circuit Range/Performance) and There are no drivability issues. ACTION 1. Save Computer Data with CONSULT-III plus (C-III plus). 2. At step 6 of the reprogramming procedure, confirm this bulletin applies to the vehicle you are working on. 3. If this bulletin applies, continue with reprogramming. 4. Write Saved Data with C-III plus.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.