P226C on the 2016 Nissan Titan
The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.
Nobody has written a description of this code yet.
| NTB20-071 | 2020-11-09. Service bulletin. 2016-2019 TITAN XD DIESEL; MIL ON WITH DTC P226C STORED IF YOU CONFIRM The MIL is ON and DTC P226C (TC BOOST CONTROL SLOW RESPONSE) IS stored, And DTC P00AF (BOOST PRESSURE CONTROL) is NOT stored in the ECM, And Binding and/or resistance is observed when the rotary turbine control valve is moved from one stop to the other (full span), by hand. NOTE: Disconnect the linkage at the actuator to move the rotary control valve. ACTION Replace the low pressure turbocharger. |
|---|---|
| NTB16-095a | 2017-08-25. Service bulletin. 2016 TITAN XD; MIL ON WITH DTC P226C OR P0471 WHEN OPERATED AT OR BELOW 32°F (0°C) This bulletin applies only to vehicles equipped with a Cummins 5.0L V8 Diesel engine. This bulletin has been amended. IF YOU CONFIRM section was updated. No other changes were made. Please discard all previous versions of this bulletin. |
| NTB16-095 | 2017-08-01. Service bulletin. 2016 TITAN XD; MIL ON WITH DTC P226C OR P0471 IF YOU CONFIRM One or both of the following DTCs are stored: - P226C (Turbocharger Boost Control Slow Response) - P0471 (Exhaust Pressure Sensor "A" Circuit Range/Performance) and There are no drivability issues. ACTION 1. Save Computer Data with CONSULT-III plus (C-III plus). 2. At step 6 of the reprogramming procedure, confirm this bulletin applies to the vehicle you are working on. 3. If this bulletin applies, continue with reprogramming. 4. Write Saved Data with C-III plus. |
3 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.