Service bulletins for the 2016 Nissan Titan
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
304 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Transmission control module are shown. Show all
| NTB16-038b | 2017-08-01. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN. 2016-2017 TITAN XD; 6AT TRANSMISSION CALIBRATION This bulletin has been amended to direct technicians to the ESM for transmission adjustment. Please discard previous versions of this bulletin. |
|---|---|
| NTB16-038 | 2016-06-22. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). 2016 TITAN XD; 6AT TRANSMISSION CALIBRATION SERVICE INFORMATION Anytime the 6AT (RE6R01A) transmission or its Transmission Control Module (TCM) is replaced an adjustment procedure must be performed using CONSULT-III plus. IMPORTANT: If the transmission adjustment is not performed, the transmission may have the following conditions: Poor shift quality Improper shift timing Engine RPM flares between shifts SERVICE PROCEDURE 1. Make sure the transmission is warm. It may be helpful to take the vehicle for a drive (approximately 10 minutes) to warm the transmission. 2. Confirm the transmission fluid level is correct. Follow the procedure for Checking the AT Fluid Level in the Electronic Service Manual (ESM), section TM-Transaxle & Transmission. 3. Set the parking brake. 4. Chock the wheels. 5.Connect the CONSULT PC to the vehicle with the plus VI. 6. Start the engine. 7. Turn the A/C system OFF. 8. Start CONSULT-III plus (C-III plus). 9. When the VI is recognized, select Diagnosis (One System). |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.