WenmarOpen by Wenmar Pro

Service bulletins for the 2014 Mazda Mazda3

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

882 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Equipment and accessories are shown. Show all

Bulletins, newest first
01-010-14-2896B2017-05-03. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE CHECK ENGINE LIGHT ON WITH DTC P0191:00 OR DTC P0192:00 STORED IN MEMORY. DTC P0191:00: FUEL PRESSURE SENSOR CIRCUIT RANGE/PERFORMANCE PROBLEM (EXCEPT 2014 MAZDA3) DTC P0192:00: FUEL PRESSURE SENSOR CIRCUIT LOW INPUT (2014 MAZDA3) THIS IS CAUSED BY THE HIGH PRESSURE FUEL PUMP NOT GENERATING THE TARGET FUEL PRESSURE (DUE TO A MANUFACTURING ERROR OF THE INNER PARTS). TO CORRECT THE PROBLEM, PRODUCTION CONTROL HAS BEEN IMPROVED.
05-005-14-2902D2017-05-03. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE CHECK ENGINE LIGHT AND AUTOMATIC TRANSAXLE WARNING LIGHT ON WITH DTC P0842, P0847, P0872 AND/OR P0877 STORED IN THE TCM MEMORY.•P0842:00 - OIL PRESSURE SWITCH NO. 1 (OIL PRESSURE SWITCH B) STUCK ON•P0847:00 - OIL PRESSURE SWITCH NO. 2 (OIL PRESSURE SWITCH A) STUCK ON•P0872:00 - OIL PRESSURE SWITCH NO. 3 (OIL PRESSURE SWITCH A) STUCK ON•P0877:00 - OIL PRESSURE SWITCH NO. 4 (OIL PRESSURE SWITCH B) STUCK ONTHE DTC P0780 AND/OR P1738 MAY ALSO BE STORED TOGETHER.•P0780:00 - GEAR SHIFTING MALFUNCTION•P1738:00 - AUTOMATIC TRANSAXLE INTERNAL MALFUNCTION. NOTE: THIS SERVICE INFORMATION IS ALSO APPLICABLE IF DTC P0780:00 IS STOREED INDEPENDENTLY. THIS IS CAUSED BY THE OIL PRESSURE SWITCH A AND/OR B AT THE CONTROL VALVE BODY TEMPORARILY OR PERMANENTLY GETTING STUCK DUE TO CONTAMINATION ENTERING THE PASSAGE. TO CORRECT THE PROBLEM, SOME MASS PRODUCTION CHANGES HAVE BEEN IMPLEMENTED TO REDUCE CONTAMINATION AND IMPROVE THE DTC DIAGNOSTIC LOGIC.
09-021-14-29152017-05-03. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. SOME VEHICLE MAY EXPERIENCE ANY ONE OF THE SYMPTOMS BELOW THAT CAN BE RESOLVED WITH A MODIFIED TAU.•AM/FM/XM CANNOT BE SELECTED AS THEY ARE GRAYED OUT•RADIO STATION RETURNS TO 87.9MHZ ON ITS OWN•AUDIO SOUND SETTING RESETS ON ITS OWN•TAU VERSION IS DISPLAYED AS “NOT AVAILABLE”
09-006-14-2882D2017-05-03. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE SYMPTOMS MENTIONED BELOW, WHICH CAN BE FIXED WITH THE LATEST SOFTWARE UPDATE (VERSION 29.00.000 OR LATER).•THE NAVIGATION ROUTE GUIDANCE IS NOT PLAYED AFTER PAIRING IPHONE 4S.•VOICE RECOGNITION FAILS AFTER IMPORTING CONTACTS WITH SPECIAL CHARACTERS ($, #, ETC) IN THE NAME (#MOM, $AM).•THE MUSIC VOLUME BAR IS DISPLAYED WHILE THE NAVIGATION IS GUIDING A TRIP.•THE COMPASS SCREEN IS DISPLAYED, EVEN THOUGH A SD CARD IS INSERTED.•SOUND IS HEARD EVEN THOUGH MUTE IS SELECTED.•THE NAVIGATION SCREEN IS REBOOTED.•NAVIGATION GUIDANCE IS WRONG DUE TO LOSS OF GPS SIGNAL.•THE NAVIGATION SYSTEM DOES NOT RECOGNIZE THE CURRENT LOCATION.•THE RADIO SCREEN IS FUZZY AND THE COMMANDER SWITCH DOES NOT OPERATE.•SELECTING A CONTACT ADDRESS CAUSES THE TOUCHSCREEN TO FLASH WHITE.•A MESSAGE “INVALID SD CARD” MAY APPEAR ON THE CENTER DISPLAY WHILE USING THE NAVIGATION SYSTEM.•A BLACK SCREEN MAY BE DISPLAYED WHILE USING THE NAVIGATION SYSTEM.•A BLUE SCREEN MAY BE DISPLAYED JUST AFTER TURNING THE IGNITION TO ACC/ON.•THE CENTER DISPLAY DOES NOT BOOT UP WITH A BLACK SCREEN.•THE CENTER DISPLAY MAY FLICKER WHILE USING WIFI CONNECTION.•THE NAVIGATION SYSTEM SOUND VOLUME CANNOT BE CHANGED.•FRENCH PRONUNCIATION IN VOICE GUIDANCE/WORDING OF THE NAVIGATION SYSTEM IS NOT CORRECT.NOTE:•MAZDA IS WORKING TO MAKE FURTHER IMPROVEMENTS TO THE MAZDA CONNECT INFOTAINMENT SYSTEM SOFT-WARE, AND MAY ISSUE FUTURE SOFTWARE UPDATES TO IMPROVE SYSTEM OPERATION AND PERFORMANCE. SOFT-WARE VERSION UPDATES CAN BE FOUND ON MS3 UNDER IDS/INFOTAINMENT.•WHEN THE SYSTEM IS UPDATED, ALL FACTORY DEFAULTS ARE RESTORED AND PERSONAL SETTINGS (SUCH AS DISPLAY AND SOUND ADJUSTMENTS) ARE LOST, INCLUDING FAVORITES INFORMATION AND PHONES PAIRED WITH THE SYSTEM.
05-004-14-2867B2017-05-03. Service bulletin. EQUIPMENT. SOME CUSTOMERS MAY COMPLAIN OF A WHINING NOISE FROM THE AUTOMATIC TRANSAXLE WHEN DRIVING AT 10 MPH AND ABOVE. THE NOISE:•DEPENDS ON THE VEHICLE’S SPEED ONLY (THE MORE SPEED, THE MORE NOISE)•OCCURS WITH ALL TYPES OF DRIVING (ACCELERATION, DECELERATION, STEADY SPEED)•DOES NOT DEPEND ON RPM, GEAR, OR ATF TEMPERATURE
01-001-14-2868D2017-05-03. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME CUSTOMERS MAY EXPERIENCE ONE OF THE FOLLOWING TWO SYMPTOMS:1. SYMPTOM (MAZDA6 ONLY)A.WARNING MESSAGE “I-ELOOP INSPECTION REQUIRED” IS DISPLAYED IN THE INSTRUMENT CLUSTER INFORMATION DISPLAY WHILE DRIVING.B.THE MASTER WARNING LIGHT WILL BE ILLUMINATED. C.DTC P1794:00 (CAPACITOR (I-ELOOP) SYSTEM: CAPACITOR (I-ELOOP) MALFUNCTION) WILL BE STORED IN PCM MEM-ORY.
09-022-14-29212017-05-03. Service bulletin. EQUIPMENT:ELECTRICAL. SOME CUSTOMERS MAY EXPERIENCE AN ELECTRICAL MALFUNCTION AFTER A VEHICLE BODY REPAIR. THE NEWLY PAINTED FENDER STAY (B) MAY BE CAUSING A POOR FRONT HARNESS (A) GROUND CONNECTION.
09-023-14-29242017-05-03. Service bulletin. EQUIPMENT. SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE.WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER NOTICED THIS SYMPTOM. IF THE CONDITION IS SIMILAR TO THE FOLLOWING “CONTROL LOGIC OF AMBIENT TEMPERATURE” OR “DIF-FERENCE BETWEEN THE TEMPERATURE DISPLAY AND OTHERS”, ADVISE THE CUSTOMER THAT THIS IS A NOR-MAL CHARACTERISTIC OF THE VEHICLE AND NOT A MALFUNCTION.
09-022-14-2921A2017-05-01. Service bulletin. EQUIPMENT:ELECTRICAL. SOME CUSTOMERS MAY EXPERIENCE AN ELECTRICAL MALFUNCTION AFTER A VEHICLE BODY REPAIR. THE NEWLY PAINTED FENDER STAY (B) MAY BE CAUSING A POOR FRONT HARNESS (A) GROUND CONNECTION.
05-004-14-28672017-04-27. Service bulletin. EQUIPMENT. SOME CUSTOMERS MAY COMPLAIN OF A WHINING NOISE FROM THE AUTOMATIC TRANSAXLE WHEN DRIVING AT 10 MPH AND ABOVE. THE NOISE: • DEPENDS ON THE VEHICLE’S SPEED ONLY (THE MORE SPEED, THE MORE NOISE) • OCCURS WITH ALL TYPES OF DRIVING (ACCELERATION, DECELERATION, STEADY SPEED) • DOES NOT DEPEND ON RPM, GEAR, OR ATF TEMPERATURE. THIS IS CAUSED BY A DAMAGED BEARING IN THE TRANSAXLE DUE TO IMPROPER CONFIGURATION OF THE TRANSAXLE CASE. A MODIFICATION HAS NOW BEEN IMPLEMENTED ON AUTOMATIC TRANSAXLES WITH THE SERIAL NUMBER TR1111680 AND HIGHER OR TD1104906 AND HIGHER. THE SERIAL NUMBER CAN BE FOUND ON TOP OF THE TRANSAXLE CASE NEAR THE MANUAL SHAFT LEVER.
09-018-14-29012017-04-27. Service bulletin. EQUIPMENT. SOME CUSTOMERS MAY COMPLAIN THAT THE ACTIVE DRIVING DISPLAY (A) VIBRATES WHEN DRIVING OVER A BUMP AND/OR CANNOT BE ADJUSTED TO A VIEWABLE POSITION USING THE COMMANDER SWITCH.THIS IS CAUSED BY THE AXIS OF THE ACTIVE DRIVING DISPLAY POPPING OUT OF POSITION IF THE CUSTOMER MANUALLY OPENS OR CLOSES THE DISPLAY, OR CLOSES THE DISPLAY WITH OBJECTS PLACED IN THE STORAGE AREA (B) FOR THE DISPLAY.
09-006-14-2882A2017-04-27. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE SYMPTOMS MENTIONED BELOW, WHICH CAN BE FIXED WITH THE LATEST SOFTWARE UPDATE (VERSION 29.00.000 OR LATER). • THE NAVIGATION ROUTE GUIDANCE IS NOT PLAYED AFTER PAIRING IPHONE 4S. • VOICE RECOGNITION FAILS AFTER IMPORTING CONTACTS WITH SPECIAL CHARACTERS ($, #, ETC) IN THE NAME (#MOM, $AM). • THE MUSIC VOLUME BAR IS DISPLAYED WHILE THE NAVIGATION IS GUIDING A TRIP. • THE COMPASS SCREEN IS DISPLAYED, EVEN THOUGH A SD CARD IS INSERTED. • SOUND IS HEARD EVEN THOUGH MUTE IS SELECTED. • THE NAVIGATION SCREEN IS REBOOTED. • NAVIGATION GUIDANCE IS WRONG DUE TO LOSS OF GPS SIGNAL. • THE NAVIGATION SYSTEM DOES NOT RECOGNIZE THE CURRENT LOCATION. • THE RADIO SCREEN IS FUZZY AND THE COMMANDER SWITCH DOES NOT OPERATE. • SELECTING A CONTACT ADDRESS CAUSES THE TOUCHSCREEN TO FLASH WHITE. • A MESSAGE “INVALID SD CARD” MAY APPEAR ON THE CENTER DISPLAY WHILE USING THE NAVIGATION SYSTEM. • A BLACK SCREEN MAY BE DISPLAYED WHILE USING THE NAVIGATION SYSTEM. • A BLUE SCREEN MAY BE DISPLAYED JUST AFTER TURNING THE IGNITION TO ACC/ON. • THE CENTER DISPLAY DOES NOT BOOT UP WITH A BLACK SCREEN. • THE CENTER DISPLAY MAY FLICKER WHILE USING WIFI CONNECTION. • THE NAVIGATION SYSTEM SOUND VOLUME CANNOT BE CHANGED. • FRENCH PRONUNCIATION IN VOICE GUIDANCE/WORDING OF THE NAVIGATION SYSTEM IS NOT CORRECT. NOTE: • MAZDA IS WORKING TO MAKE FURTHER IMPROVEMENTS TO THE MAZDA CONNECT INFOTAINMENT SYSTEM SOFTWARE, AND MAY ISSUE FUTURE SOFTWARE UPDATES TO IMPROVE SYSTEM OPERATION AND PERFORMANCE. SOFTWARE VERSION UPDATES CAN BE FOUND ON MS3 UNDER IDS/INFOTAINMENT. • WHEN THE SYSTEM IS UPDATED, ALL FACTORY DEFAULTS ARE RESTORED AND PERSONAL SETTINGS (SUCH AS DISPLAY AND SOUND ADJUSTMENTS) ARE LOST, INCLUDING FAVORITES INFORMATION AND PHONES PAIRED WITH THE SYSTEM.
05-005-14-29022017-04-27. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE CHECK ENGINE LIGHT AND AUTOMATIC TRANSAXLE WARNING LIGHT ON WITH DTC P0842, P0847, P0872 AND/OR P0877 STORED IN THE TCM MEMORY. • P0842:00 - OIL PRESSURE SWITCH NO. 1 (OIL PRESSURE SWITCH B) STUCK ON • P0847:00 - OIL PRESSURE SWITCH NO. 2 (OIL PRESSURE SWITCH A) STUCK ON • P0872:00 - OIL PRESSURE SWITCH NO. 3 (OIL PRESSURE SWITCH A) STUCK ON • P0877:00 - OIL PRESSURE SWITCH NO. 4 (OIL PRESSURE SWITCH B) STUCK ON THE DTC P0780 AND/OR P1738 MAY ALSO BE STORED TOGETHER. • P0780:00 - GEAR SHIFTING MALFUNCTION • P1738:00 - AUTOMATIC TRANSAXLE INTERNAL MALFUNCTION THIS IS CAUSED BY THE OIL PRESSURE SWITCH A AND/OR B AT THE CONTROL VALVE BODY TEMPORARILY OR PERMANENTLY GETTING STUCK DUE TO CONTAMINATION ENTERING THE PASSAGE. TO CORRECT THE PROBLEM, SOME MASS PRODUCTION CHANGES HAVE BEEN IMPLEMENTED TO REDUCE CONTAMINATION AND IMPROVE THE DTC DIAGNOSTIC LOGIC.
09-001-14-2872A2017-04-27. Service bulletin. EQUIPMENT. SOME VEHICLES MAY EXHIBIT A RATTLE NOISE FROM THE BOTTOM OF THE A-PILLAR WHEN DRIVING ON ROUGH ROADS OR OVER BUMPS. THIS IS CAUSED BY THE COWL UPPER PLATE AND/OR DASH UPPER PANEL INTERFERING WITH THE WIPER BRACKET. TO CORRECT THE PROBLEM, SPOT WELDING LOCATIONS TO THE DASH AND COWL ASSEMBLY HAVE BEEN CHANGED. FOR THE AFFECTED VEHICLES, A CLEARANCE NEEDS TO BE CREATED BETWEEN THE WIPER BRACKET AND COWL UPPER PLATE AND BETWEEN THE WIPER BRACKET AND DASH UPPER PANEL.
09-006-14-2882B2017-04-27. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE SYMPTOMS MENTIONED BELOW, WHICH CAN BE FIXED WITH THE LATEST SOFTWARE UPDATE (VERSION 29.00.000 OR LATER). • THE NAVIGATION ROUTE GUIDANCE IS NOT PLAYED AFTER PAIRING IPHONE 4S. • VOICE RECOGNITION FAILS AFTER IMPORTING CONTACTS WITH SPECIAL CHARACTERS ($, #, ETC) IN THE NAME (#MOM, $AM). • THE MUSIC VOLUME BAR IS DISPLAYED WHILE THE NAVIGATION IS GUIDING A TRIP. • THE COMPASS SCREEN IS DISPLAYED, EVEN THOUGH A SD CARD IS INSERTED. • SOUND IS HEARD EVEN THOUGH MUTE IS SELECTED. • THE NAVIGATION SCREEN IS REBOOTED. • NAVIGATION GUIDANCE IS WRONG DUE TO LOSS OF GPS SIGNAL. • THE NAVIGATION SYSTEM DOES NOT RECOGNIZE THE CURRENT LOCATION. • THE RADIO SCREEN IS FUZZY AND THE COMMANDER SWITCH DOES NOT OPERATE. • SELECTING A CONTACT ADDRESS CAUSES THE TOUCHSCREEN TO FLASH WHITE. • A MESSAGE “INVALID SD CARD” MAY APPEAR ON THE CENTER DISPLAY WHILE USING THE NAVIGATION SYSTEM. • A BLACK SCREEN MAY BE DISPLAYED WHILE USING THE NAVIGATION SYSTEM. • A BLUE SCREEN MAY BE DISPLAYED JUST AFTER TURNING THE IGNITION TO ACC/ON. • THE CENTER DISPLAY DOES NOT BOOT UP WITH A BLACK SCREEN. • THE CENTER DISPLAY MAY FLICKER WHILE USING WIFI CONNECTION. • THE NAVIGATION SYSTEM SOUND VOLUME CANNOT BE CHANGED. • FRENCH PRONUNCIATION IN VOICE GUIDANCE/WORDING OF THE NAVIGATION SYSTEM IS NOT CORRECT. NOTE: • MAZDA IS WORKING TO MAKE FURTHER IMPROVEMENTS TO THE MAZDA CONNECT INFOTAINMENT SYSTEM SOFTWARE, AND MAY ISSUE FUTURE SOFTWARE UPDATES TO IMPROVE SYSTEM OPERATION AND PERFORMANCE. SOFTWARE VERSION UPDATES CAN BE FOUND ON MS3 UNDER IDS/INFOTAINMENT. • WHEN THE SYSTEM IS UPDATED, ALL FACTORY DEFAULTS ARE RESTORED AND PERSONAL SETTINGS (SUCH AS DISPLAY AND SOUND ADJUSTMENTS) ARE LOST, INCLUDING FAVORITES INFORMATION AND PHONES PAIRED WITH THE SYSTEM.
05-005-14-2902A2017-04-27. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE CHECK ENGINE LIGHT AND AUTOMATIC TRANSAXLE WARNING LIGHT ON WITH DTC P0842, P0847, P0872 AND/OR P0877 STORED IN THE TCM MEMORY. • P0842:00 - OIL PRESSURE SWITCH NO. 1 (OIL PRESSURE SWITCH B) STUCK ON • P0847:00 - OIL PRESSURE SWITCH NO. 2 (OIL PRESSURE SWITCH A) STUCK ON • P0872:00 - OIL PRESSURE SWITCH NO. 3 (OIL PRESSURE SWITCH A) STUCK ON • P0877:00 - OIL PRESSURE SWITCH NO. 4 (OIL PRESSURE SWITCH B) STUCK ON THE DTC P0780 AND/OR P1738 MAY ALSO BE STORED TOGETHER. • P0780:00 - GEAR SHIFTING MALFUNCTION • P1738:00 - AUTOMATIC TRANSAXLE INTERNAL MALFUNCTION THIS IS CAUSED BY THE OIL PRESSURE SWITCH A AND/OR B AT THE CONTROL VALVE BODY TEMPORARILY OR PERMANENTLY GETTING STUCK DUE TO CONTAMINATION ENTERING THE PASSAGE. TO CORRECT THE PROBLEM, SOME MASS PRODUCTION CHANGES HAVE BEEN IMPLEMENTED TO REDUCE CONTAMINATION AND IMPROVE THE DTC DIAGNOSTIC LOGIC.
09-012-14-28912017-04-27. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. WHEN REPLACING THE SIRIUSXM SATELLITE RADIO UNIT (OR A MAZDA CONNECT TUNER AND AMP UNIT (TAU)) WITH REPLACEMENT TUNER FOR ANY REASON, A CALL MUST BE MADE TO INFORM SIRIUSXM OF THE EXISTING RADIO ID AND THE NEW/ REPLACEMENT SAT RADIO ID AS SOON AS POSSIBLE TO ENSURE THE CUSTOMER LEAVES THE DEALERSHIP WITH ACTIVE (WORKING SAT RADIO.
05-002-14-28942017-04-27. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXHIBIT THE ATX FAIL-SAFE FUNCTION WORKING WITH THE FOLLOWING SYMPTOMS: • THE VEHICLE SPEED DOES NOT INCREASE WITH ENGINE SPEED • THE ATX DOES NOT SHIFT UP OR DOWN AS EXPECTED. THE CONDITION MAY NOT ALWAYS BE ABLE TO BE REPRODUCED AND DTCS MAY NOT BE STORED WHEN THE VEHICLE IS BROUGHT IN. FOREIGN MATERIAL (IRON PARTICLES IN THE ATF) MAY ENTER THE ATX VALVE BODY AND CAUSE A TEMPORARY MALFUNCTION OF THE VALVE BODY AND/OR SENSOR (ATX FAIL-SAFE FUNCTION ACTIVATED). THE FAIL-SAFE FUNCTION IS CANCELED WITHOUT DTCS RECORDED IF THE MALFUNCTION GOES AWAY AND DOES NOT OCCUR AGAIN AT THE NEXT DRIVE CYCLE. FAIL-SAFE FUNCTION OPERATION: • IF A TECHNICAL FAULT IS DETECTED IN THE ATX BY THE MALFUNCTION DETECTION FUNCTION, THE FAIL-SAFE FUNCTION LIMITS THE ATX CONTROL (INHIBITS SOME GEARS OR SHIFT DOWN FUNCTIONS). • EVEN IN CASE OF AN ATX MALFUNCTION, THE FAIL-SAFE FUNCTION ALLOWS MINIMUM VEHICLE DRIVEABILITY.
01-001-14-2868C2017-04-27. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME CUSTOMERS MAY EXPERIENCE ONE OF THE FOLLOWING TWO SYMPTOMS: 1. SYMPTOM (MAZDA6 ONLY) A. WARNING MESSAGE “I-ELOOP INSPECTION REQUIRED” IS DISPLAYED IN THE INSTRUMENT CLUSTER INFORMATION DISPLAY WHILE DRIVING. B. THE MASTER WARNING LIGHT WILL BE ILLUMINATED.C. DTC P1794:00 (CAPACITOR (I-ELOOP) SYSTEM: CAPACITOR (I-ELOOP) MALFUNCTION) WILL BE STORED IN PCM MEMORY.
09-001-14-28722017-04-27. Service bulletin. EQUIPMENT. SOME VEHICLES MAY EXHIBIT A RATTLE NOISE FROM THE BOTTOM OF THE A-PILLAR WHEN DRIVING ON ROUGH ROADS OR OVER BUMPS. THIS IS CAUSED BY THE COWL UPPER PLATE AND/OR DASH UPPER PANEL INTERFERING WITH THE WIPER BRACKET. TO CORRECT THE PROBLEM, THE SHAPE OF THE WIPER BRACKET HAS BEEN CHANGED. FOR THE AFFECTED VEHICLES, A CLEARANCE NEEDS TO BE CREATED BETWEEN THE WIPER BRACKET AND COWL UPPER PLATE AND BETWEEN THE WIPER BRACKET AND DASH UPPER PANEL.
09-004-14-28742017-04-27. Service bulletin. EQUIPMENT. SOME VEHICLES MAY EXPERIENCE STAINS APPEARING ON THE HOOD, ROOF AND/OR TRUNK OF THE VEHICLE. THIS CONCERN IS MOST LIKELY TO BE FOUND IN A COLD WEATHER AREAS JUST AFTER THE RAPGARD IS REMOVED AT PDI. THIS MAY BE CAUSED BY MOISTURE WHICH HAS BEEN TRAPPED AND CONDENSED BETWEEN THE PAINT AND THE RAPGARD. THESE TYPES OF STAINS CAN BE REMOVED WITH A HEAT GUN OR AN INFRARED DRIER.IF YOU ENCOUNTER THIS CONCERN DURING PDI, USE A HEAT GUN OR AN INFRARED DRIER TO APPLY HEAT TO THE AFFECTED AREA TO REMOVE THE STAIN(S).
01-001-14-2868A2017-04-27. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME CUSTOMERS MAY EXPERIENCE ONE OF THE FOLLOWING TWO SYMPTOMS: 1. SYMPTOM (MAZDA6 ONLY) A. WARNING MESSAGE “I-ELOOP INSPECTION REQUIRED” IS DISPLAYED IN THE INSTRUMENT CLUSTER INFORMATION DISPLAY WHILE DRIVING. B. THE MASTER WARNING LIGHT WILL BE ILLUMINATED. C. DTC P1794:00 (CAPACITOR (I-ELOOP) SYSTEM: CAPACITOR (I-ELOOP) MALFUNCTION) WILL BE STORED IN PCM MEMORY.2. SYMPTOM (MAZDA3 AND MAZDA6) A. WARNING MESSAGE “BATTERY MANAGEMENT SYSTEM INSPECTION REQUIRED” AND THEN "CHARGING SYSTEM MALFUNCTION/ENGINE COULD STOP UNEXPECTEDLY” IS DISPLAYED IN THE INSTRUMENT CLUSTER INFORMATION DISPLAY AFTER DRIVING IN THE RAIN. B. THE MASTER WARNING LIGHT WILL BE ILLUMINATED. THE MAZDA6 WARNING INDICATOR LIGHT AND WARNING MESSAGES ARE SHOWN BELOW: C. THE FOLLOWING DTCS ARE STORED IN PCM MEMORY: • DTC P1794:00 - CAPACITOR (I-ELOOP) SYSTEM: CAPACITOR (I-ELOOP) MALFUNCTION • DTC P2502:00 - GENERATOR SYSTEM: MALFUNCTION IN VOLTAGE GENERATED BY GENERATOR
09-006-14-28822017-04-26. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE SYMPTOMS MENTIONED BELOW, WHICH CAN BE FIXED WITH THE LATEST SOFTWARE UPDATE (VERSION 27.00.000 OR LATER).•A MESSAGE “INVALID SD CARD” MAY APPEAR ON THE CENTER DISPLAY WHILE USING THE NAVIGATION SYSTEM.•A BLACK SCREEN MAY BE DISPLAYED WHILE USING THE NAVIGATION SYSTEM.•A BLUE SCREEN MAY BE DISPLAYED JUST AFTER TURNING THE IGNITION TO ACC/ON.•THE CENTER DISPLAY DOES NOT BOOT UP WITH A BLACK SCREEN.•THE CENTER DISPLAY MAY FLICKER WHILE USING WIFI CONNECTION.•THE NAVIGATION SYSTEM SOUND VOLUME CANNOT BE CHANGED.•FRENCH PRONUNCIATION IN VOICE GUIDANCE/WORDING OF THE NAVIGATION SYSTEM IS NOT CORRECT.NOTE:•MAZDA IS WORKING TO MAKE FURTHER IMPROVEMENTS TO THE MAZDA CONNECT INFOTAINMENT SYSTEM SOFT-WARE, AND MAY ISSUE FUTURE SOFTWARE UPDATES TO IMPROVE SYSTEM OPERATION AND PERFORMANCE. SOFT-WARE VERSION UPDATES CAN BE FOUND ON MS3 UNDER IDS/INFOTAINMENT.•WHEN THE SYSTEM IS UPDATED, ALL FACTORY DEFAULTS ARE RESTORED AND PERSONAL SETTINGS (SUCH AS DISPLAY AND SOUND ADJUSTMENTS) ARE LOST, INCLUDING FAVORITES INFORMATION AND PHONES PAIRED WITH THE SYSTEM.
09-009-14-28712017-04-26. Service bulletin. EQUIPMENT. SOME VEHICLES MAY EXPERIENCE A CONDITION WHERE THE COMMANDER SWITCH DROPS DOWN FROM THE PANEL. DAMAGE TO THE HOOK(S) (A) SECURING THE COMMANDER SWITCH (B) TO THE FRAME (C) IS CAUSED BY AN EXCESSIVE VERTICAL FORCE. TO CORRECT THE PROBLEM, PIECES OF NON-WOVEN FABRIC HAVE BEEN ADDED TO THE COMMANDER SWITCH TO INCREASE THE LOAD CAPACITY.
09-034-13-2831B2017-04-26. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM:SOFTWARE. AN UPDATED VERSION OF THE SOFTWARE FOR THE CONNECTIVITY MASTER UNIT (CMU) HAS BECOME AVAILABLE. UNDER THIS MSP41, THE CMU OF APPLICABLE MAZDA3 VEHICLES WILL BE REPROGRAMMED TO THE UPDATED VERSION USING A USB MEMORY STICK. THIS SOFTWARE UPDATE INCLUDES SOME FIXES FOR THE INFOTAINMENT SYSTEM AS DESCRIBED BELOW AS WELL AS SOME ADDITIONAL MINOR FIXES.•A “CHARGING SYSTEM MALFUNCTION” MESSAGE MAY BE DISPLAYED ON THE CENTER DISPLAY BY MISTAKE (NO CHARGING SYSTEM WARNING LIGHT IN THE INSTRUMENT CLUSTER).•THE VOICE RECOGNITION MAY NOT ACTIVATE EVEN WHEN PRESSING THE TALK BUTTON.•THE WARNING OF “CHECK XM ANTENNA” MAY BE CONTINUOUSLY DISPLAYED ON THE CENTER DISPLAY.NOTE:•MAZDA IS WORKING TO MAKE FURTHER IMPROVEMENTS TO THE MAZDA CONNECT INFOTAINMENT SYSTEM SOFT-WARE, AND MAY ISSUE FUTURE SOFTWARE UPDATES TO IMPROVE SYSTEM OPERATION AND PERFORMANCE. SOFT-WARE VERSION UPDATES CAN BE FOUND ON MS3 UNDER IDS/INFOTAINMENT.•WHEN THE SYSTEM IS UPDATED, ALL FACTORY DEFAULTS ARE RESTORED AND PERSONAL SETTINGS (SUCH AS DISPLAY AND SOUND ADJUSTMENTS) ARE LOST, INCLUDING FAVORITES INFORMATION AND PHONES PAIRED WITH THE SYSTEM.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.