WenmarOpen by Wenmar Pro

Service bulletins for the 2024 Mazda CX-90

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

552 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Glass, wipers and mirrors are shown. Show all

Bulletins, newest first
SA-025-252025-06-05. Service bulletin. VISIBILITY/WIPER. Some vehicles may exhibit wiper blade contact with the A-pillar trim, with or without a chattering noise. This condition may be caused by worn or contaminated wiper blades. It can also be caused by bent wiper arms, or loose wiper arm retaining nuts due to improper handling. Improper handling occurs when pulling on or forcing the wiper arms. Technicians should be aware that while replacement of the wiper blade may resolve some cases, correction of bent components or repositioning of the wiper arms, particularly when the retaining nut is loose, requires additional steps to ensure proper alignment and function.
SA-061-24a2024-10-04. Service bulletin. VISIBILITY/WIPER. Some customers may complain about a low washer fluid level warning message even though a visual inspection of the washer fluid tank looks like it still has a fair amount of fluid in it. With the CX-90 and CX-70 introduction of the front-engine and rear-wheel-drive layout, the washer tank shape was changed from a vertical to a horizontal type. This makes it look like there is still enough liquid left if viewed from the spout when the warning light comes on.
SSPD6 FC2024-08-06. Service campaign. SERVICE BRAKES; VEHICLE SPEED CONTROL; VISIBILITY/WIPER; BACK OVER PREVENTION: WARNINGS; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. SSPD6 - SPECIAL SERVICE PROGRAM - VEHICLE CONTROL MODULE (VCM) PROGRAMMING - 2024 CX-90 SSPD6 - 2024 CX-90 - Vehicle Control Module (VCM) Reprogramming: This campaign will resolve three different concerns. Unintentional warning or braking when backing up. When backing up the vehicle in a parking lot or similar area, the View Monitor Camera (VMC) may detect certain physical obstacles lower to the ground such as, the tires of an adjacent vehicle, parking lines, plants, etc. even though there are no obstacles behind the vehicle. Under this condition, the Smart Brake Support (SBS) system may determine that there is a possibility of a collision, notifying with a visual (screen display) and audible (warning sound), and the brakes possibly being applied in certain cases. Driver recognition result is not displayed (on equipped vehicles) The Driver Personalization system may not recognize the driver’s face to change the seat position settings that have been programmed. In this case the vehicle interprets the driver as a “guest” (non-personalized). The vehicle driver must be in the driver’s seat within 15 seconds of unlocking the vehicle to initiate the Driver Recognition function. Mazda Radar Cruise Control (MRCC) may reduce speed to match adjacent lane vehicle While driving on a curved road condition with the Mazda Radar Cruise Control (MRCC) activated, a vehicle in the right or left lane may be detected as a vehicle in front of the CX-90 and the MRCC will unexpectedly reduce vehicle speed to match the detected vehicle. The repair will be reprogramming the VCM with modified software via M-MDS, using MDARS. There are 28,404 vehicles in the campaign in the U.S. and U.S. Territories.
SSPD6 Warranty2024-06-05. Service campaign. VISIBILITY/WIPER; SERVICE BRAKES; VEHICLE SPEED CONTROL; BACK OVER PREVENTION: WARNINGS; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. SSPD6 - SPECIAL SERVICE PROGRAM - VEHICLE CONTROL MODULE (VCM) PROGRAMMING - 2024 CX-90 SSPD6 - 2024 CX-90 - Vehicle Control Module (VCM) Reprogramming: This campaign will resolve three different concerns. Unintentional warning or braking when backing up. When backing up the vehicle in a parking lot or similar area, the View Monitor Camera (VMC) may detect certain physical obstacles lower to the ground such as, the tires of an adjacent vehicle, parking lines, plants, etc. even though there are no obstacles behind the vehicle. Under this condition, the Smart Brake Support (SBS) system may determine that there is a possibility of a collision, notifying with a visual (screen display) and audible (warning sound), and the brakes possibly being applied in certain cases. Driver recognition result is not displayed (on equipped vehicles) The Driver Personalization system may not recognize the driver’s face to change the seat position settings that have been programmed. In this case the vehicle interprets the driver as a “guest” (non-personalized). The vehicle driver must be in the driver’s seat within 15 seconds of unlocking the vehicle to initiate the Driver Recognition function. Mazda Radar Cruise Control (MRCC) may reduce speed to match adjacent lane vehicle While driving on a curved road condition with the Mazda Radar Cruise Control (MRCC) activated, a vehicle in the right or left lane may be detected as a vehicle in front of the CX-90 and the MRCC will unexpectedly reduce vehicle speed to match the detected vehicle. The repair will be reprogramming the VCM with modified software via M-MDS, using MDARS. There are 28,404 vehicles in the campaign in the U.S. and U.S. Territories.
SSPD6 Repair2024-06-05. Service campaign. FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; VISIBILITY/WIPER; SERVICE BRAKES; VEHICLE SPEED CONTROL; BACK OVER PREVENTION: WARNINGS. SSPD6 - SPECIAL SERVICE PROGRAM - VEHICLE CONTROL MODULE (VCM) PROGRAMMING - 2024 CX-90 SSPD6 - 2024 CX-90 - Vehicle Control Module (VCM) Reprogramming: This campaign will resolve three different concerns. Unintentional warning or braking when backing up. When backing up the vehicle in a parking lot or similar area, the View Monitor Camera (VMC) may detect certain physical obstacles lower to the ground such as, the tires of an adjacent vehicle, parking lines, plants, etc. even though there are no obstacles behind the vehicle. Under this condition, the Smart Brake Support (SBS) system may determine that there is a possibility of a collision, notifying with a visual (screen display) and audible (warning sound), and the brakes possibly being applied in certain cases. Driver recognition result is not displayed (on equipped vehicles) The Driver Personalization system may not recognize the driver’s face to change the seat position settings that have been programmed. In this case the vehicle interprets the driver as a “guest” (non-personalized). The vehicle driver must be in the driver’s seat within 15 seconds of unlocking the vehicle to initiate the Driver Recognition function. Mazda Radar Cruise Control (MRCC) may reduce speed to match adjacent lane vehicle While driving on a curved road condition with the Mazda Radar Cruise Control (MRCC) activated, a vehicle in the right or left lane may be detected as a vehicle in front of the CX-90 and the MRCC will unexpectedly reduce vehicle speed to match the detected vehicle. The repair will be reprogramming the VCM with modified software via M-MDS, using MDARS. There are 28,404 vehicles in the campaign in the U.S. and U.S. Territories.
SSPD6 Dlr Ltr2024-06-05. Service campaign. BACK OVER PREVENTION: WARNINGS; SERVICE BRAKES; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; VEHICLE SPEED CONTROL; VISIBILITY/WIPER. SSPD6 - SPECIAL SERVICE PROGRAM - VEHICLE CONTROL MODULE (VCM) PROGRAMMING - 2024 CX-90 SSPD6 - 2024 CX-90 - Vehicle Control Module (VCM) Reprogramming: This campaign will resolve three different concerns. Unintentional warning or braking when backing up. When backing up the vehicle in a parking lot or similar area, the View Monitor Camera (VMC) may detect certain physical obstacles lower to the ground such as, the tires of an adjacent vehicle, parking lines, plants, etc. even though there are no obstacles behind the vehicle. Under this condition, the Smart Brake Support (SBS) system may determine that there is a possibility of a collision, notifying with a visual (screen display) and audible (warning sound), and the brakes possibly being applied in certain cases. Driver recognition result is not displayed (on equipped vehicles) The Driver Personalization system may not recognize the driver’s face to change the seat position settings that have been programmed. In this case the vehicle interprets the driver as a “guest” (non-personalized). The vehicle driver must be in the driver’s seat within 15 seconds of unlocking the vehicle to initiate the Driver Recognition function. Mazda Radar Cruise Control (MRCC) may reduce speed to match adjacent lane vehicle While driving on a curved road condition with the Mazda Radar Cruise Control (MRCC) activated, a vehicle in the right or left lane may be detected as a vehicle in front of the CX-90 and the MRCC will unexpectedly reduce vehicle speed to match the detected vehicle. The repair will be reprogramming the VCM with modified software via M-MDS, using MDARS. There are 28,404 vehicles in the campaign in the U.S. and U.S. Territories.
SSPD6 Dlr Email2024-06-05. Service campaign. FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; VEHICLE SPEED CONTROL; BACK OVER PREVENTION: WARNINGS; SERVICE BRAKES; VISIBILITY/WIPER. SSPD6 - SPECIAL SERVICE PROGRAM - VEHICLE CONTROL MODULE (VCM) PROGRAMMING - 2024 CX-90 SSPD6 - 2024 CX-90 - Vehicle Control Module (VCM) Reprogramming: This campaign will resolve three different concerns. Unintentional warning or braking when backing up. When backing up the vehicle in a parking lot or similar area, the View Monitor Camera (VMC) may detect certain physical obstacles lower to the ground such as, the tires of an adjacent vehicle, parking lines, plants, etc. even though there are no obstacles behind the vehicle. Under this condition, the Smart Brake Support (SBS) system may determine that there is a possibility of a collision, notifying with a visual (screen display) and audible (warning sound), and the brakes possibly being applied in certain cases. Driver recognition result is not displayed (on equipped vehicles) The Driver Personalization system may not recognize the driver’s face to change the seat position settings that have been programmed. In this case the vehicle interprets the driver as a “guest” (non-personalized). The vehicle driver must be in the driver’s seat within 15 seconds of unlocking the vehicle to initiate the Driver Recognition function. Mazda Radar Cruise Control (MRCC) may reduce speed to match adjacent lane vehicle While driving on a curved road condition with the Mazda Radar Cruise Control (MRCC) activated, a vehicle in the right or left lane may be detected as a vehicle in front of the CX-90 and the MRCC will unexpectedly reduce vehicle speed to match the detected vehicle. The repair will be reprogramming the VCM with modified software via M-MDS, using MDARS. There are 28,404 vehicles in the campaign in the U.S. and U.S. Territories.
SA-030-242024-06-03. Other. VISIBILITY/WIPER; EXTERIOR LIGHTING. Some vehicles may experience a warning light ON, warning messages, or a headlamp concern. After checking the vehicle, DTC B10A3:86 may be stored with or without other DTCs. Follow the repair procedure below for B10A3:86. Customers having this concern should have their vehicle repaired using the following repair procedure.
09-018-242024-04-02. Service bulletin. VISIBILITY. Some customers may complain that the driver’s side outer mirror glass vibrates when driving at high speeds at approximately 60 mph (100 km/hour ) or more on bumpy roads such as road joints, coarse-grained paved roads or rough roads. This is caused by insufficient hardness of the adhesive tape between the outer mirror glass holder and the mirror glass. To eliminate this concern, the material of the adhesive tape between the outer mirror glass holder and the mirror glass has been improved and the tape location has been modified.
09-015-242024-04-02. Service bulletin. VISIBILITY:POWER WINDOW DEVICES AND CONTROLS. This is caused by the quarter window glass molding deforming due to harmful external conditions such as extreme heat or excessive force applied, and the double-sided tape fixing the molding’s back side detaches. To eliminate this concern, the double-sided tape has been widened to enhance attachment.
09-010-242024-03-05. Service bulletin. STRUCTURE; VISIBILITY:SUN/MOON ROOF ASSEMBLY. Some vehicles may exhibit a rattle noise from the panorama sunroof. This may be caused by: Body vibration while driving and/or outside-temperature changes creating slight gaps between the plastic grommets and the roof reinforcement cover during use. A slight gap between the drip rail and the roof reinforcement, causing interference. To eliminate this concern, the shape of the panorama sunroof unit will be modified.
SA-003-242024-02-02. Service bulletin. EQUIPMENT; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM. Some customers with a PHEV CX-90 may report a warning light or a reported issue of A/C malfunction. Upon inspection, the technician will discover that the vehicle has the P0531 diagnostic trouble code set.
09-005-242024-02-01. Service bulletin. VISIBILITY; UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some customers may experience that the passenger-side outer door mirror glass tilts down when unlocking and opening the driver's door. This is caused by a door-electrical supply unit malfunction due to changes in the vehicle power conditions. Alternatively, after the passenger-side door mirror tilts down in response to reversing, it does not return to its original position even when the reverse is disengaged. To eliminate this concern, the control software of the door-electrical supply unit (passenger's side) has been modified.
SA-079-232024-01-05. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; VISIBILITY. Some customers may complain about color discrepancies (brightness differences) of the image displayed on the screen when using the 360°view monitor. As this phenomenon is not a system failure, do not make any repairs or replace any parts.
15-005-232024-01-05. Service bulletin. VISIBILITY. Some vehicles may exibit the BSM indicator light on the outer mirror glass delayed while driving at low speeds. This is caused by improper control logic of the side radar sensors where detection delay may occur in a specific driving environment. To eliminate this concern, the control software of the side radar sensors has been modified.
09-046-232024-01-05. Service bulletin. VISIBILITY. Some customers may complain that the driver’s side outer mirror glass vibrates when driving at high speeds at approximately 60 mph (100 km/hour ) or more on bumpy roads such as road joints, coarse-grained paved roads or rough roads. This is caused by insufficient hardness of the adhesive tape between the outer mirror glass holder and the mirror glass. To eliminate this concern, the material of the adhesive tape between the outer mirror glass holder and the mirror glass has been improved and the tape location has been modified.
SSPD3a2024-01-04. Service bulletin. UNKNOWN OR OTHER; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:REFRIGERANT HOSES AND FITTINGS. SSPD3- 2024 CX-90 (PHEV) - OBD II AC Refrigerant Pressure Detection Concern: On certain CX-90 vehicles, air conditioner refrigerant pressure malfunction may not be judged correctly due to inappropriate failure judgement program of PCM. The repair will be reprogramming the PCM and ECU with the modified software with MMDS, using MDARS. There are 6,089 vehicles in the campaign.
09-037-23a2023-12-05. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY; UNKNOWN OR OTHER. Some customers may experience that the passenger-side outer door mirror glass tilts down when unlocking and opening the driver's door. This is caused by a door-electrical supply unit malfunction due to changes in the vehicle power conditions. To eliminate this concern, the control software of the door-electrical supply unit (passenger's side) has been modified.
SA-059-232023-11-01. Service bulletin. VISIBILITY:POWER WINDOW DEVICES AND CONTROLS; ELECTRICAL SYSTEM. When the power windows are operated many times without being fully closed, small errors of the window position sensor may accumulate and cause improper operation of the jam-safe function. To reduce the risk of this occurrence, the AUTO function is disabled if the power window is operated 10 consecutive times without being fully closed (turning the ignition OFF and then ON does not reset the counting). If the power window is fully closed before the 10th time, the counting restarts and the AUTO function is not deactivated.
09-037-232023-11-01. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY:POWER WINDOW DEVICES AND CONTROLS. Some customers may experience that the passenger-side outer door mirror glass tilts down when unlocking and opening the driver's door. This is caused by a door-electrical supply unit malfunction due to changes in the vehicle power conditions. To eliminate this concern, the control software of the door-electrical supply unit (passenger's side) has been modified.
SA-066-232023-11-01. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY:POWER WINDOW DEVICES AND CONTROLS. Some customers will report their window will not auto-close. This may be caused by the vehicle learning the window current draw incorrectly because the door moved when the initialization was performed.
SSPD32023-11-01. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM. SSPD3- 2024 CX-90 (PHEV) - OBD II AC Refrigerant Pressure Detection Concern: On certain CX-90 vehicles, air conditioner refrigerant pressure malfunction may not be judged correctly due to inappropriate failure judgement program of PCM. The repair will be reprogramming the PCM and ECU with the modified software with MMDS, using MDARS. There are 6,089 vehicles in the campaign.
SA-039-23a2023-10-05. Service bulletin. STRUCTURE; VISIBILITY:POWER WINDOW DEVICES AND CONTROLS. Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.