Service bulletins for the 2024 Mazda CX-90
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
552 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Throttle and cruise control are shown. Show all
| SSPD6 FC | 2024-08-06. Service campaign. SERVICE BRAKES; VEHICLE SPEED CONTROL; VISIBILITY/WIPER; BACK OVER PREVENTION: WARNINGS; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. SSPD6 - SPECIAL SERVICE PROGRAM - VEHICLE CONTROL MODULE (VCM) PROGRAMMING - 2024 CX-90 SSPD6 - 2024 CX-90 - Vehicle Control Module (VCM) Reprogramming: This campaign will resolve three different concerns. Unintentional warning or braking when backing up. When backing up the vehicle in a parking lot or similar area, the View Monitor Camera (VMC) may detect certain physical obstacles lower to the ground such as, the tires of an adjacent vehicle, parking lines, plants, etc. even though there are no obstacles behind the vehicle. Under this condition, the Smart Brake Support (SBS) system may determine that there is a possibility of a collision, notifying with a visual (screen display) and audible (warning sound), and the brakes possibly being applied in certain cases. Driver recognition result is not displayed (on equipped vehicles) The Driver Personalization system may not recognize the driver’s face to change the seat position settings that have been programmed. In this case the vehicle interprets the driver as a “guest” (non-personalized). The vehicle driver must be in the driver’s seat within 15 seconds of unlocking the vehicle to initiate the Driver Recognition function. Mazda Radar Cruise Control (MRCC) may reduce speed to match adjacent lane vehicle While driving on a curved road condition with the Mazda Radar Cruise Control (MRCC) activated, a vehicle in the right or left lane may be detected as a vehicle in front of the CX-90 and the MRCC will unexpectedly reduce vehicle speed to match the detected vehicle. The repair will be reprogramming the VCM with modified software via M-MDS, using MDARS. There are 28,404 vehicles in the campaign in the U.S. and U.S. Territories. |
|---|---|
| SSPD6 Warranty | 2024-06-05. Service campaign. VISIBILITY/WIPER; SERVICE BRAKES; VEHICLE SPEED CONTROL; BACK OVER PREVENTION: WARNINGS; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. SSPD6 - SPECIAL SERVICE PROGRAM - VEHICLE CONTROL MODULE (VCM) PROGRAMMING - 2024 CX-90 SSPD6 - 2024 CX-90 - Vehicle Control Module (VCM) Reprogramming: This campaign will resolve three different concerns. Unintentional warning or braking when backing up. When backing up the vehicle in a parking lot or similar area, the View Monitor Camera (VMC) may detect certain physical obstacles lower to the ground such as, the tires of an adjacent vehicle, parking lines, plants, etc. even though there are no obstacles behind the vehicle. Under this condition, the Smart Brake Support (SBS) system may determine that there is a possibility of a collision, notifying with a visual (screen display) and audible (warning sound), and the brakes possibly being applied in certain cases. Driver recognition result is not displayed (on equipped vehicles) The Driver Personalization system may not recognize the driver’s face to change the seat position settings that have been programmed. In this case the vehicle interprets the driver as a “guest” (non-personalized). The vehicle driver must be in the driver’s seat within 15 seconds of unlocking the vehicle to initiate the Driver Recognition function. Mazda Radar Cruise Control (MRCC) may reduce speed to match adjacent lane vehicle While driving on a curved road condition with the Mazda Radar Cruise Control (MRCC) activated, a vehicle in the right or left lane may be detected as a vehicle in front of the CX-90 and the MRCC will unexpectedly reduce vehicle speed to match the detected vehicle. The repair will be reprogramming the VCM with modified software via M-MDS, using MDARS. There are 28,404 vehicles in the campaign in the U.S. and U.S. Territories. |
| SSPD6 Repair | 2024-06-05. Service campaign. FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; VISIBILITY/WIPER; SERVICE BRAKES; VEHICLE SPEED CONTROL; BACK OVER PREVENTION: WARNINGS. SSPD6 - SPECIAL SERVICE PROGRAM - VEHICLE CONTROL MODULE (VCM) PROGRAMMING - 2024 CX-90 SSPD6 - 2024 CX-90 - Vehicle Control Module (VCM) Reprogramming: This campaign will resolve three different concerns. Unintentional warning or braking when backing up. When backing up the vehicle in a parking lot or similar area, the View Monitor Camera (VMC) may detect certain physical obstacles lower to the ground such as, the tires of an adjacent vehicle, parking lines, plants, etc. even though there are no obstacles behind the vehicle. Under this condition, the Smart Brake Support (SBS) system may determine that there is a possibility of a collision, notifying with a visual (screen display) and audible (warning sound), and the brakes possibly being applied in certain cases. Driver recognition result is not displayed (on equipped vehicles) The Driver Personalization system may not recognize the driver’s face to change the seat position settings that have been programmed. In this case the vehicle interprets the driver as a “guest” (non-personalized). The vehicle driver must be in the driver’s seat within 15 seconds of unlocking the vehicle to initiate the Driver Recognition function. Mazda Radar Cruise Control (MRCC) may reduce speed to match adjacent lane vehicle While driving on a curved road condition with the Mazda Radar Cruise Control (MRCC) activated, a vehicle in the right or left lane may be detected as a vehicle in front of the CX-90 and the MRCC will unexpectedly reduce vehicle speed to match the detected vehicle. The repair will be reprogramming the VCM with modified software via M-MDS, using MDARS. There are 28,404 vehicles in the campaign in the U.S. and U.S. Territories. |
| SSPD6 Dlr Ltr | 2024-06-05. Service campaign. BACK OVER PREVENTION: WARNINGS; SERVICE BRAKES; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; VEHICLE SPEED CONTROL; VISIBILITY/WIPER. SSPD6 - SPECIAL SERVICE PROGRAM - VEHICLE CONTROL MODULE (VCM) PROGRAMMING - 2024 CX-90 SSPD6 - 2024 CX-90 - Vehicle Control Module (VCM) Reprogramming: This campaign will resolve three different concerns. Unintentional warning or braking when backing up. When backing up the vehicle in a parking lot or similar area, the View Monitor Camera (VMC) may detect certain physical obstacles lower to the ground such as, the tires of an adjacent vehicle, parking lines, plants, etc. even though there are no obstacles behind the vehicle. Under this condition, the Smart Brake Support (SBS) system may determine that there is a possibility of a collision, notifying with a visual (screen display) and audible (warning sound), and the brakes possibly being applied in certain cases. Driver recognition result is not displayed (on equipped vehicles) The Driver Personalization system may not recognize the driver’s face to change the seat position settings that have been programmed. In this case the vehicle interprets the driver as a “guest” (non-personalized). The vehicle driver must be in the driver’s seat within 15 seconds of unlocking the vehicle to initiate the Driver Recognition function. Mazda Radar Cruise Control (MRCC) may reduce speed to match adjacent lane vehicle While driving on a curved road condition with the Mazda Radar Cruise Control (MRCC) activated, a vehicle in the right or left lane may be detected as a vehicle in front of the CX-90 and the MRCC will unexpectedly reduce vehicle speed to match the detected vehicle. The repair will be reprogramming the VCM with modified software via M-MDS, using MDARS. There are 28,404 vehicles in the campaign in the U.S. and U.S. Territories. |
| SSPD6 Dlr Email | 2024-06-05. Service campaign. FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; VEHICLE SPEED CONTROL; BACK OVER PREVENTION: WARNINGS; SERVICE BRAKES; VISIBILITY/WIPER. SSPD6 - SPECIAL SERVICE PROGRAM - VEHICLE CONTROL MODULE (VCM) PROGRAMMING - 2024 CX-90 SSPD6 - 2024 CX-90 - Vehicle Control Module (VCM) Reprogramming: This campaign will resolve three different concerns. Unintentional warning or braking when backing up. When backing up the vehicle in a parking lot or similar area, the View Monitor Camera (VMC) may detect certain physical obstacles lower to the ground such as, the tires of an adjacent vehicle, parking lines, plants, etc. even though there are no obstacles behind the vehicle. Under this condition, the Smart Brake Support (SBS) system may determine that there is a possibility of a collision, notifying with a visual (screen display) and audible (warning sound), and the brakes possibly being applied in certain cases. Driver recognition result is not displayed (on equipped vehicles) The Driver Personalization system may not recognize the driver’s face to change the seat position settings that have been programmed. In this case the vehicle interprets the driver as a “guest” (non-personalized). The vehicle driver must be in the driver’s seat within 15 seconds of unlocking the vehicle to initiate the Driver Recognition function. Mazda Radar Cruise Control (MRCC) may reduce speed to match adjacent lane vehicle While driving on a curved road condition with the Mazda Radar Cruise Control (MRCC) activated, a vehicle in the right or left lane may be detected as a vehicle in front of the CX-90 and the MRCC will unexpectedly reduce vehicle speed to match the detected vehicle. The repair will be reprogramming the VCM with modified software via M-MDS, using MDARS. There are 28,404 vehicles in the campaign in the U.S. and U.S. Territories. |
| SA-010-24 | 2024-03-05. Service bulletin. ELECTRICAL SYSTEM; VEHICLE SPEED CONTROL:THROTTLE. A kick-down switch has been adopted to determine when the customer has fully depressed the throttle pedal for maximum acceleration. A load can be felt while the accelerator pedal is being depressed. When the accelerator pedal is depressed further, the kick-down switch is activated and a click is felt. The driver can control the kick-down by knowing the amount of accelerator depression. An electrical signal is not transmitted by the kick-down switch turning on/off. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.