WenmarOpen by Wenmar Pro

Service bulletins for the 2016 Mazda CX-9

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

613 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
SA-031-262026-05-05. Service bulletin. STRUCTURE:BODY; UNKNOWN OR OTHER. DESCRIPTION Some vehicles may require the replacement of a damaged VIN plate or vehicle certification label. To obtain a replacement VIN plate (bulkhead-mounted and visible through the lower-left area of the windshield), contact DAG (Dealer Assistance Group) using VIN Plate Request Form available on One Mazda. To obtain a replacement vehicle certification label (located on the Bô€€€pillar or front door), contact your assigned DSM (District Service Manager) to place the order. If DSM contact information is not available, refer to the Dealer & Field Contact Directory.
SA-039/252025-09-05. Service bulletin. UNKNOWN OR OTHER; STRUCTURE:BODY. Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection. If a structure's windows create enough of a curve, the concave glass can focus the sun's rays onto a small area and acting like magnifiying glass direct the sunbeams into a hot pinpoint of light. This magnifcation of the sun's rays can cause damage to vehicle trim (see examples). Additional information and exemplar images regarding this phenomenon can be found by performing a google search.
SA-058-242024-09-04. Service bulletin. STRUCTURE:BODY. Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
SA-056-242024-09-04. Service bulletin. STRUCTURE:BODY. Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way.
SA-050-242024-09-04. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Some customers may complain that their liftgate does not open. This can mean a range of things, from the liftgate not unlatching to the power liftgate (PLG) not opening automatically. If you confirm that the customer's concern is that the liftgate does not unlatch correctly, follow the repair information below.
09-006-242024-03-06. Service bulletin. STRUCTURE:BODY:HATCHBACK/LIFTGATE; LATCHES/LOCKS/LINKAGES. Some vehicles may exhibit a creaking or clacking noise when operating the power lift gate (PLG). The noise may be caused by the following: Creaking noise: Dust and dirt accumulates on the sealing portion of the PLG drive unit, reducing sealing performance. Snow and water may enter the PLG drive unit. Humidity then causes rust inside of the unit, resulting in noise. Clacking noise: Since the grease applied on the spring end of the PLG drive unit is insufficient, interference noise is caused when the spring end interferes with the spring guide. The noise has been eliminated by the following mass-production changes: Creaking noise: The sealing structure has been modified to prevent dust/dirt from entering the unit. Clacking noise: The production procedure of the PLG drive unit has been modified to apply sufficient grease to spring end.
SA-039-23a2023-10-05. Service bulletin. STRUCTURE; VISIBILITY:POWER WINDOW DEVICES AND CONTROLS. Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
SA-039-232023-08-05. Service bulletin. STRUCTURE. Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
SA-036-232023-07-05. Service bulletin. STRUCTURE; EQUIPMENT. Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way. NOTE: The antistatic effect does not deteriorate with this procedure.
SA-008-22a2022-11-04. Service bulletin. STRUCTURE. Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
Mazda TSB March2022-06-06. Service bulletin. STRUCTURE. Mazda Technical Service Bulletins March 2016 Some vehicles may exhibit the inner cloth (A) falling down at the rear end causing a poor appearance and obstructing the view of the back window.
09010162022-06-06. Service bulletin. STRUCTURE:BODY:DOOR. Stains found on kpaint during PDI
SA-008-222022-03-04. Service bulletin. STRUCTURE. Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
MT-001-222022-03-04. Service bulletin. UNKNOWN OR OTHER; STRUCTURE. Some customers may report concerns with interior upholstery surface stains particularly on high contact areas (e.g.: steering wheel, door panels, shifter...etc.). This may be caused by skin oils or chemicals such as hand lotions. Use a clean towel damped in leather/vinyl cleaner or mild soap to clean the steering wheel. NOTE: Upholstery maintenance and care information can also be found in the Owner's Manual.
09-009-21-3759a2022-01-06. Service bulletin. STRUCTURE. Rusty Panel at Bottom (Inner Side) of Doors: Some customers may complain about rust at the bottom (inner side) of the doors where the seaming welt is located. It is caused by mud/sand adhering to the side sill, which scratches the paint surface when the door is opened/closed. The mud/sand is most likely brought in by the driver and/or passenger when stepping in and out of the vehicle.
09-009-21-37592021-04-05. Service bulletin. STRUCTURE. Some customers may complain about rust at the bottom (inner side) of the doors where the seaming welt is located. It is caused by mud/sand adhering to the side sill, which scratches the paint surface when the door is opened/closed. The mud/sand is most likely brought in by the driver and/or passenger when stepping in and out of the vehicle.
15-005-17-3358c2021-03-08. Service bulletin. VISIBILITY; STRUCTURE. Some customers may complain that the BSM indicator light on the outer mirror glass does not illuminate when: Customer vehicle (A) is slowly passing other vehicle, even if the vehicle is still in the alert area. Adjacent vehicle (B) driving at same speed, even if the vehicle is still in the alert area. Customers who have owned previous Mazda vehicles are more likely to complain. The BSM control module has been modified to address these customer concerns.
02-009-17-33922021-03-08. Service bulletin. EQUIPMENT; STRUCTURE; SUSPENSION:FRONT:SHOCK ABSORBER. Some vehicles may exhibit a crack on the front shock absorber dust boot (A). This may be caused by dust boot insufficient resistance to cold. The shape and material of the dust boot has been changed to improve the resistance to cold.
SA3412021-02-08. Service bulletin. STRUCTURE. Exterior side garnish damage due to improper vehicle lift - Adjust the height of the vehicle lift extension pad to prevent lieft arm contact with the exterior side garnish. If not adjusted properly, the exterior side garnish and/or a fender may be damaged
MTI_11332021-02-08. Service bulletin. STRUCTURE. Exterior side garnish damage due to improper vehicle lift - Adjust the height of the vehicle lift extension pad to prevent lieft arm contact with the exterior side garnish. If not adjusted properly, the exterior side garnish and/or a fender may be damaged by the vehicle.
09-052-162021-01-25. Service bulletin. STRUCTURE; EQUIPMENT. Center coinsole lid rattles when driving on rough roads.
DRW082021-01-25. Service bulletin. FUEL SYSTEM, GASOLINE; WHEELS; STRUCTURE. Lift gate hinge nut concern - On effected vehicles, the tightening torque of lift gate hinge nuts at cabin side does not meet the specified value. Due to this, it may cause interference/noise with the body when closing/opening the lift gate, or water leakage may occur inside cabin. Originally the coincerned nuts are tightened to the specified torque at the production line. However, the thickness of the packing between the lift gate hinge and body shrinks slightly by heat during paint baking process, resulting in a lowered tightening torque.
00-001-172021-01-25. Service bulletin. STRUCTURE; EQUIPMENT. Special Service Tool Shipment - January 2017. In support of the 2014 - 17 Mazda6 and 2016-17 Mazda CX-9, Mazda will ship to all dealers a new Special Service Tool (SST) * The SST will be shipped by Mazda's toool vendor Bosch in the month of January, 2017 * The following SST is the latest addition to the Mazda required tool (MRT).
09-005-20-3653a2021-01-05. Service bulletin. STRUCTURE; EQUIPMENT. Some vehicles may exhibit a rattle, clunk or pop noise from the front of the vehicle while driving. The noise may be caused by loose cowl panel bolts.
RF-20-012020-10-05. Service bulletin. STRUCTURE:BODY:BUMPERS. Mazda Accessories has re-released the Front and Rear Bumper Trim kits for the CX-9 (see the table below for application and required components). NOTE: The Front and Rear Bumper Trim Kits are only to be installed on Sport and Touring Models from 2020MY and forward. The Rear Bumper Trim contained within the kit is not compatible with the Handsfree Liftgate Sensor that comes standard on the Carbon Edition (new for 2021), GT, or the Signature Models.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.