WenmarOpen by Wenmar Pro

Service bulletins for the 2021 Mazda CX-30

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

616 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Equipment and accessories are shown. Show all

Bulletins, newest first
16-006-232023-08-03. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. Updated software release for concerns with MAZDA CONNECT infotainment system. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Ver. 7000C0A-NA06_12018 or later).
09-028-232023-08-03. Service bulletin. EQUIPMENT:ELECTRICAL. Some CX-5 and CX-30 customers may find that the liftgate does not close when pressing the power liftgate (PLG) rear switch (A) located on the interior liftgate trim. This may be caused by PLG switch corrosion. Water from a high pressure car washer and/or condensation may drip onto the switch connector and cause corrosion. To eliminate this concern, the PLG rear switch has been modified with a waterproof connector.
SA-036-232023-07-05. Service bulletin. STRUCTURE; EQUIPMENT. Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way. NOTE: The antistatic effect does not deteriorate with this procedure.
SA-027-23a2023-07-05. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. IN-VEHICLE NETWORK MALFUNCTION AND MASTER WARNING LIGHT ON. DTC U3000:04 STORED (DOES NOT APPLY TO 09-001/23)
SA-015-23d2023-07-05. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ENGINE AND ENGINE COOLING. Connected Services, Frequently Asked Questions (FAQ)
SA-015-23c2023-06-04. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Frequently Asked Questions (FAQ)
SA-009-23d2023-06-04. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:INFOTAINMENT; ENGINE AND ENGINE COOLING. Some customers may complain about any of the following:1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF, 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".
SA-005-23a2023-06-04. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
16-003-232023-06-04. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT; ELECTRICAL SYSTEM. Some customers may complain that Mazda Connect does not start (blank screen) or that it takes a long time to restart/ reboot after starting the vehicle. This is caused by the initialization process with the CMU failing at startup due to a defective circuit board element. To eliminate this concern, the internal hardware (DRAM) of the CMU has been improved.
SA-015-23b2023-05-04. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Mazda Connected Services - Frequently Asked Questions (FQA)
SA-009-23c2023-05-04. Service bulletin. LATCHES/LOCKS/LINKAGES; EQUIPMENT:ELECTRICAL:INFOTAINMENT; ENGINE AND ENGINE COOLING. Some customers may complain about any of the following:1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative.Engine Start / Stop,Door Lock / Unlock,Lights ON / OFF. 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".
15-001-232023-05-03. Service bulletin. LANE DEPARTURE: SENSING SYSTEM: RADAR; EQUIPMENT. Some vehicles may exhibit the warning messages Safety and Driver Support Systems Temporarily Disabled or Front Radar Obscured. Drive Safely displayed in the instrument cluster despite no dirt on the front radar sensor while driving in specific locations as follows:
SA-015-232023-04-04. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Mazda Connect Services - Frequently Asked Questions (FAQ)
SA-016-232023-04-04. Service bulletin. EQUIPMENT:ELECTRICAL. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method. B. Auxiliary Key Code Cut Method
16-003-232023-04-04. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:INFOTAINMENT. Some customers may complain that Mazda Connect does not start (blank screen) or that it takes a long time to restart/ reboot after starting the vehicle. This is caused by the initialization process with the CMU failing at startup due to a defective circuit board element. To eliminate this concern, the internal hardware (DRAM) of the CMU has been improved.
SA-009-23a2023-04-04. Service bulletin. ENGINE AND ENGINE COOLING; LATCHES/LOCKS/LINKAGES; EXTERIOR LIGHTING; EQUIPMENT:ELECTRICAL:INFOTAINMENT. Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF
SA-009-232023-03-03. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT; EXTERIOR LIGHTING; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".
SA-016-22a2023-01-05. Service bulletin. EQUIPMENT. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method
09-016-22a2022-11-04. Service bulletin. EQUIPMENT. Some customers may complain that the rear console lid does not slide smoothly. This may be caused by improperly positioned felt pads attached to the rear console lid lock, which may have moved out of position after repetitive use. The exposed adhesive residue may stick to the rail and disrupt smooth sliding operation. To eliminate this concern, the felt pad positions have been changed.
SA-019-22b2022-11-04. Service bulletin. EQUIPMENT. Mazda Connected Services Frequently Asked Questions (FAQs)
SA-054-222022-09-06. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. This information will give you the necessary knowledge to respond to customers concerns of Smart Brake Support (SBS) unintended braking. By educating the customer on the system operation, it should reduce their anxiety or distrust of the vehicle.
SA-049-222022-08-04. Service bulletin. EQUIPMENT. Some vehicles may exhibit the trim peeling off the EPB (Electronic Parking Brake) or power window switches.
15-004-222022-07-06. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. Some vehicles may exhibit the warning messages "Safety and Driver Support Systems Temporarily Disabled" or "Front Radar Obscured. Drive Safely." displayed in the instrument cluster despite no dirt on the front radar sensor while driving in specific locations as follows: - Roads with continuous elevated road ways on one side or tall walls on one side - Inside tunnels with an overall rounded shape - Roads with no reflective objects around This is caused by inappropriate decision logic of the control software in the front radar sensor. To eliminate this concern, the control software of the front radar sensor has been modified.
SA-043-222022-07-06. Service bulletin. FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA; EQUIPMENT ADAPTIVE/MOBILITY. FSC dynamic aiming (mid-drive aiming) may not complete if the vehicle is driven on a road as described below: - The road lane markings are covered by snow and are not visible. - There are no road lane markings on the road surface. - The road is winding and the vehicle cannot drive straight (300 m / 984 ft or more turning radius is required). FSC dynamic aiming is completed if the following conditions are met: 1. "Forward Sensing Camera Calibration Mode" message (1) on instrument cluster MID disappears. 2. The i-ACTIVSENSE warning light (2) turns off. 3. Steps 1 and 2 are completed within 20 minutes from start of aiming.
SA-039-222022-07-06. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT; UNKNOWN OR OTHER. Some customers may complain about scratches on the instrument cluster lens.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.