WenmarOpen by Wenmar Pro

Service bulletins for the 2015 Land Rover Range Rover

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

718 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Automatic transmission are shown. Show all

Bulletins, newest first
SSM743742019-05-28. Service bulletin. ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Air leak from the right hand camshaft cover assembly due to a split diaphragm within the pressure control valve. Any of the following DTCs (indicating an air intake system leak) could be stored in the Powertrain Control Module (PCM) ? P2187, P2189, P0505, P0507.
SSM743362019-04-22. Service bulletin. FUEL SYSTEM, GASOLINE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Variations of DTC P0087 are stored in the PCM for the fuel rail pressure sensor.
LTB01156NAS12018-05-29. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE. The engine Malfunction Indicator Lamp (MIL) may be illuminated on the Instrument Cluster (IC) with Diagnostic Trouble Code (DTC) P132B-77 stored in the Powertrain Control Module (PCM).
SGI18-052018-05-29. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. An issue has been identified on certain vehicles within the listed Affected Vehicle Range where the 'Service Required' message will not appear on the Instrument Cluster (IC) if a vehicle has reached its service point and the engine is started normally by pressing the engine START/STOP button with the brake pedal pressed. Turning on the ignition only, by pressing the engine START/STOP button without the brake pedal pressed, will still allow the 'Service Required' warning message to be displayed. In addition, the latest Powertrain Control Module (PCM) software has introduced a concern relating to the ability to reset the service message indicator. The latest IC software will rectify these concerns.
LTB-00871-NAS-12018-04-17. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Situation: After a Service Interval Reset, the Service Interval Indicator (SII) may appear on the Instrument Cluster (IC) for less than one second when no service is required. Cause: This may be caused by a discrepancy between the values in the Powertrain Control Module (PCM) and the IC for next service initialization.
N118NAS12018-04-02. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). An issue has been identified on certain vehicles within the listed Affected Vehicle Range where the 'Service Required' message will not appear on the Instrument Cluster (IC) if a vehicle has reached its service point and the engine is started normally by pressing the engine START/STOP button with the brake pedal pressed. Turning on the ignition only, by pressing the engine START/STOP button without the brake pedal pressed, will still allow the 'Service Required' warning message to be displayed. In addition, the latest Powertrain Control Module (PCM) software has introduced a concern relating to the ability to reset the service message indicator. The latest IC software will rectify these concerns.
SSM730652017-09-08. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. Issue: Oil leakage from the joint of 9 HP transmission and front differential following a repair in and around the Transmission internal differential right output half shaft.
SSM730652017-09-08. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. Issue: Oil leakage from the joint of 9 HP transmission and front differential following a repair in and around the Transmission internal differential right output half shaft.
LTB00740NAS32017-09-08. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. Situation: A 'Gearbox fault' message may be displayed on the Instrument Cluster along with one or more of the following Diagnostic Trouble Codes (DTC) stored in the Transmission Control Module (TCM): P0600-04, P0710-27, P0710-64, P0712-11, P0713-13, P0975-19, P0978-19, P0981-19, P0984-19, and P099B-14.
SSM730652017-09-08. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. Issue: Oil leakage from the joint of 9 HP transmission and front differential following a repair in and around the Transmission internal differential right output half shaft.
LTB01018NAS12017-09-08. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. Situation: Vehicle acceleration may be interrupted by a delay/hesitation in transmission gear selection. A four-second delay in acceleration occurs when a fifth-gear downshift is requested when the accelerator pedal is in the depressed position at low vehicle speeds, during warm up when the ambient temperature is 39°F / 4°C and lower.
LTB00837NAS22017-08-25. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. Transmission leak, poor shift quality, and/or noise
SSM729012017-06-14. Service bulletin. POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE); POWER TRAIN:AUTOMATIC TRANSMISSION. ISSUE: OIL LEAKING BETWEEN THE AUTOMATIC TRANSMISSION AND TRANSFER CASE WHICH IS CURRENTLY BEING MISDIAGNOSED LEADING TO REPEAT REPAIRS, I.E. LEAKS INCORRECTLY BEING IDENTIFIED AS COMING FROM THE REAR TRANSMISSION OIL SEAL OR SUMP.
LTB00871NAS42017-06-14. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). SITUATION: AFTER A SERVICE INTERVAL RESET, THE SERVICE INTERVAL INDICATOR (SII) MAY APPEAR ON THE INSTRUMENT CLUSTER (IC) FOR LESS THAN ONE SECOND WHEN NO SERVICE IS REQUIRED.
LTB00757NAS52017-06-13. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL). SITUATION: ONE OF THE FOLLOWING ISSUES MAY OCCUR: • THE GEAR SELECTOR LED INDICATOR FLASHES AND NEUTRAL IS INVOLUNTARILY ENGAGED WHEN COMING TO A STOP OR IMMEDIATELY AFTER AN AUTOMATIC ENGINE RESTART (WHEN INTELLIGENT STOP/START IS ACTIVE). • THE INSTRUMENT CLUSTER HAS SWITCHED OFF AFTER AN AUTOMATIC ENGINE STOP AND DRIVER EXIT CONDITIONS DO NOT EXIST AND THE VEHICLE DOES NOT AUTOMATICALLY RESTART THE ENGINE UPON RELEASE OF THE BRAKE PEDAL (NOTE. DTC P162F-00 MAY BE STORED IN THE ENGINE CONTROL MODULE [ECM]).
SSM725682017-06-13. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). MIL WITH DIESEL EXHAUST FLUID (DEF) WARNING DISPLAYED
LTB00883NAS22017-06-12. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE. "SITUATION: THE ENGINE MALFUNCTION INDICATOR LAMP (MIL) MAY BE ILLUMINATED WITH DIAGNOSTIC TROUBLE CODE (DTC) P068A-00 STORED IN THE POWERTRAIN CONTROL MODULE (PCM) CAUSE: THIS MAY BE CAUSED BY A PCM SOFTWARE ISSUE (CPU RESPONSE TIME ERROR DURING VEHICLE SHUTDOWN PROCEDURE)."
LTB00883NAS12017-06-12. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE. "SITUATION: THE ENGINE MALFUNCTION INDICATOR LAMP (MIL) MAY BE ILLUMINATED WITH DIAGNOSTIC TROUBLE CODE (DTC) P068A-00 STORED IN THE POWERTRAIN CONTROL MODULE (PCM) CAUSE: THIS MAY BE CAUSED BY A PCM SOFTWARE ISSUE (CPU RESPONSE TIME ERROR DURING VEHICLE SHUTDOWN PROCEDURE)."
LTB00871NAS22017-06-12. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). "SITUATION: AFTER A SERVICE INTERVAL RESET, THE SERVICE INTERVAL INDICATOR (SII) MAY APPEAR ON THE INSTRUMENT CLUSTER (IC) FOR LESS THAN ONE SECOND WHEN NO SERVICE IS REQUIRED. CAUSE: THIS MAY BE CAUSED BY A DISCREPANCY BETWEEN THE VALUES IN THE POWERTRAIN CONTROL MODULE (PCM) AND THE IC FOR NEXT SERVICE INITIALIZATION."
SGI15-402017-06-12. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). "DESCRIPTION TO ADDRESS CONCERNS WITH THE CORRECT OPERATION OF THE OXYGEN (O2) SENSORS, UPDATED POWERTRAIN CONTROL MODULE (PCM) SOFTWARE IS REQUIRED ON THE MODELS, MODEL YEARS, ENGINE VARIANTS, AND VEHICLE IDENTIFICATION NUMBER (VIN) RANGES AS LISTED IN THE AFFECTED VEHICLE RANGE."
LTB00757NAS42017-06-09. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). "SITUATION: ONE OF THE FOLLOWING ISSUES MAY OCCUR: • THE GEAR SELECTOR LED INDICATOR FLASHES AND NEUTRAL IS INVOLUNTARILY ENGAGED WHEN COMING TO A STOP OR IMMEDIATELY AFTER AN AUTOMATIC ENGINE RESTART (WHEN INTELLIGENT STOP/START IS ACTIVE)."
LTB00832NAS12017-06-09. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE. "SITUATION: A 'TRANSMISSION FAULT' MESSAGE MAY BE DISPLAYED ON THE INSTRUMENT CLUSTER AND THE VEHICLE HAS DEFAULTED TO A FIXED GEAR 'LIMP HOME' OPERATION. UPON DIAGNOSIS, A TECHNICIAN MAY FIND DIAGNOSTIC TROUBLE CODE (DTC) P0780-93 STORED IN THE TRANSMISSION CONTROL MODULE (TCM). CAUSE: THIS MAY BE CAUSED BY AN ERROR IN THE TCM SOFTWARE."
LTB00821NAS12017-06-09. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN:MANUAL TRANSMISSION. "SITUATION: WHEN IN SPORT (S) MODE, THE TRANSMISSION MAY CHANGE GEARS ONLY MANUALLY (VIA STEERING WHEEL MOUNTED SHIFT PADDLES OR THE GEAR SELECTOR [RANGE ROVER SPORT ONLY]) AND DOES NOT REVERT BACK TO AUTO MODE. CAUSE: THIS MAY BE CAUSED BY AN INCORRECT CALIBRATION CAUSING THE VEHICLE TO ENTER MANUAL ONLY MODE WHEN THE 'PROGRESS CONTROL SYSTEM' SELECTS A MODE OF OPERATION."
SGI15-40 (ISSUE2017-06-09. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE. DESCRIPTION: TO ADDRESS CONCERNS WITH THE CORRECT OPERATION OF THE OXYGEN (O2) SENSORS, UPDATED POWERTRAIN CONTROL MODULE (PCM) SOFTWARE IS REQUIRED ON THE MODELS, MODEL YEARS, ENGINE VARIANTS, AND VEHICLE IDENTIFICATION NUMBER (VIN) RANGES AS LISTED IN THE AFFECTED VEHICLE RANGE.
LTB00757NAS32017-06-08. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. "SITUATION: AFTER AN ECO STOP, THE VEHICLE WILL NOT MOVE OFF AND THE TRANSMISSION MAY APPEAR TO BE IN NEUTRAL EVEN THOUGH THE TRANSMISSION CONTROL SWITCH HAS NOT BEEN MOVED. THE TRANSMISSION GEAR POSITION INDICATOR ON THE GEAR SELECTOR AND IN THE INSTRUMENT CLUSTER MESSAGE CENTER MAY BE FLASHING 'D' OR 'S'. IF THE ENGINE IS STOPPED AND RESTARTED AND THEN DRIVE (D) OR SPORT (S) IS SELECTED, VEHICLE OPERATION RETURNS TO NORMAL."

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.