WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Land Rover Range Rover

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1097 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Driver assistance are shown. Show all

Bulletins, newest first
LTB00814NAS42021-03-22. Service bulletin. SERVICE BRAKES; SUSPENSION; BACK OVER PREVENTION. The underhood lower Noise Vibration Harshness (NVH) pads and dirty air duct guides may show signs of ripping, tearing, and/or has a poor finish.
SSM720502021-03-15. Service bulletin. BACK OVER PREVENTION. Issue: Following replacement of front Air Struts Dealers / Customer may report a noise or a vehicle lean error state. On investigation the front Air Spring is found to be misaligned and damaged.
LTB00660NAS32020-11-06. Service bulletin. STRUCTURE:BODY:BUMPERS; ELECTRICAL SYSTEM:ADAS:PARKING ASSIST:WARNING; ELECTRICAL SYSTEM. The front and/or rear parking aid system may be inoperative.
SSM734212017-12-14. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. Issue: Land Rover has received reports where during diagnosis of the surround camera system the Diagnostic Trouble Code (DTC) B12BD-31 "Rear Camera - No Signal" and or U1A4B-49 "Control Module Processor B - Internal Failure" stored in the Image Processing Module B (IPMB). The DTC is a false flagging code that can lead to incorrect diagnosis of any camera related issue reported by the customer.
SSM734212017-09-08. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. Issue: Land Rover has received reports where during diagnosis of the surround camera system the Diagnostic Trouble Code (DTC) B12BD-31 ?Rear Camera - No Signal? and or U1A4B-49 ?Control Module Processor B ? Internal Failure? stored in the Image Processing Module B (IPMB). The DTC is a false flagging code that can lead to incorrect diagnosis of any camera related issue reported by the customer.
SSM723302017-06-07. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; EQUIPMENT:ELECTRICAL. "ISSUE: THE MESSAGE ""RADAR SENSOR BLOCKED"" APPEARS IN INSTRUMENT PACK DISPLAY. IF BLOCKAGE OCCURS WHILE ACC IS BEING USED, “DRIVER INTERVENE” AND/OR ""RADAR SENSOR BLOCKED"" MESSAGE WILL APPEAR ON THE CLUSTER AND DTC C1A67-97 SET. BLOCKAGE CAN ALSO OCCUR WHEN ACC IS NOT BEING USED. CAUSE: ""RADAR SENSOR BLOCKED"" INDICATES THAT THE ADAPTIVE SPEED CONTROL SYSTEM'S VISIBILITY HAS BEEN REDUCED DUE TO AN OBSTRUCTION. ACC CONTINUALLY SCANS FOR OBJECTS AHEAD AND, IF IT SEES NO OBJECTS I.E. VEHICLES, ROAD SIGNS, LAMP POSTS, GUARD RAILS ETC., IT WILL INDICATE A BLOCKAGE EVEN IF THE ACC IS NOT USED. THE C1A67-97 DTC FLAGS A RADAR BLOCKAGE SITUATION AND NOT A SYSTEM FAULT."
SSM686182017-06-07. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; LANE DEPARTURE: BLIND SPOT DETECTION. "ISSUE: SIDE OBJECT DETECTION DIAGNOSTIC TROUBLE CODES (DTCS) U0233-00 & U0232-00 STORED IN FRONT CONTROL DISPLAY INTERFACE MODULE (FCDIM) WHERE A VEHICLE DOES NOT HAVE THE BLIND SPOT MONITORING OPTION FITTED. CAUSE: CONFIGURATION MIS-MATCH BETWEEN FCDIM & VEHICLE CONFIGURATION FILE THAT MAY CAUSE DTCS U0233-00 ‘LOST COMMUNICATION WITH THE RIGHT SIDE OBSTACLE DETECTION CONTROL MODULE’ & U0232-00 ‘LOST COMMUNICATION WITH THE LEFT SIDE OBSTACLE DETECTION MODULE’ TO BE STORED UNNECESSARILY."
SSM722482017-06-06. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM; EQUIPMENT:ELECTRICAL. "ISSUE: A CUSTOMER MAY REPORT THAT ONE OR MORE OF THE SURROUND CAMERAS ARE INOPERATIVE. CAUSE: POOR CONNECTION AT THE CAMERA MODULE."
SSM719772017-06-02. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM; ELECTRICAL SYSTEM. "ISSUE THIS SSM IS BEING RELEASED TO CLARIFY THE FUNCTION OF THE SURROUND CAMERAS WHEN DEALING WITH CUSTOMERS COMPLAINTS OF BLUE SCREEN AND DUE TO CAMERAS BEING REPLACED WHEN THEY ARE NOT FAULTY. ACTION SHOULD YOU HAVE A VEHICLE EXHIBITING THIS CONDITION PLEASE REFER TO THE FOLLOWING REPAIR GUIDE LINES. SEE ATTACHMENTS FOR VISUAL AID."
LTB00548NAS22017-06-01. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. "ISSUED SEPTEMBER 2014. SITUATION: ON VEHICLES FITTED WITH THE SURROUND CAMERA SYSTEM ONLY, ONE OR MORE OF THE SURROUND CAMERA IMAGES MAY NOT APPEAR ON THE TOUCH SCREEN (TS) WHEN SELECTED. THE CONCERN MAY APPEAR AS A BLUE SCREEN CAMERA IMAGE FOR THE AFFECTED CAMERA. CAUSE: THIS MAY BE CAUSED BY MOISTURE INGRESS IN THE CAMERA."
LTB00548NAS12016-06-09. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. SUMMARY TO BE PROVIDED ON A FUTURE DATE.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.