WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Land Rover Range Rover

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1097 on file from NHTSA, as of 2026-10-19.

About P0042 on the 2013 Land Rover Range Rover: what the code means, and the bulletins and recalls about the same components.

By type

By component

By trouble code

By topic

Only bulletins with trouble code: P0042 are shown. Show all

Bulletins, newest first
SSM631572022-10-24. Service bulletin. LANE DEPARTURE; BACK OVER PREVENTION; ELECTRICAL SYSTEM; AIR BAGS; STRUCTURE. Check Engine Warning Light illuminated. DTC's in the engine control module relevant to the oxygen sensors are found to be stored, these may include any of the following codes P0042, P0043, P0055, P0061, P0062, P0063, P0142, P0144, P0162. Cause - Manufacturing fault at the supplier - misalignment with in the sensor. This pre-stress, in combination with normal vehicle use leads to premature composnent malfunction. Action If the above issue is verified, before fittding the fnew oxygen sensors please check the date code stamped on the body content of the sensor and ensure it reads 12th of December 2012 or later. Refer to the attached file for date code breakdown Part Number affected are - LR035746 - lEFT HAND MID OXYGEN SENSOR
SSM631572022-06-13. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ENGINE AND ENGINE COOLING. Check Engine Warning Light illuminated. DTC's in the engine control module relevant to the oxygen sensors are found to be stored, these may include any of the following codes P0042, P0043, P0055, P0061, P0062, P0063, P0142, P0144, P0162. Cause - Manufacturing fault at the supplier - misalignment with in the sensor. This pre-stress, in combination with normal vehicle use leads to premature composnent malfunction. Action If the above issue is verified, before fittding the fnew oxygen sensors please check the date code stamped on the body content of the sensor and ensure it reads 12th of December 2012 or later. Refer to the attached file for date code breakdown Part Number affected are - LR035746 - lEFT HAND MID OXYGEN SENSOR
LTB00671NAS22017-06-01. Service bulletin. ELECTRICAL SYSTEM; ENGINE. "SITUATION: THE ENGINE MALFUNCTION INDICATOR LAMP (MIL) MAY BE ILLUMINATED AND DIAGNOSTIC TROUBLE CODE (DTC [(P0042, P0043, P0044, P0055, P0061, P0062, P0063, P0142, P0143, P0144, P0147, P0162, P0163, P0164, AND/OR P0167]) RELEVANT TO THE POST-CATALYST HEATED OXYGEN SENSORS MAY BE STORED IN THE ENGINE CONTROL MODULE (ECM). CAUSE: THIS MAY BE CAUSED BY A POST-CATALYST HEATED OXYGEN SENSOR SOFTWARE ERROR."
SSM631572017-05-31. Service bulletin. ENGINE. "ISSUE: CHECK ENGINE WARNING LIGHT ILLUMINATED. DTC’S IN THE ENGINE CONTROL MODULE RELEVANT TO THE OXYGEN SENSORS ARE FOUND TO BE STORED, THESE MAY INCLUDE ANY OF THE FOLLOWING CODES P0042, P0043, P0055, P0061, P0062, P0063, P0142, P0144, P0162. CAUSE: MANUFACTURING FAULT AT THE SUPPLIER – MISALIGNMENT WITHIN THE SENSOR LEADING TO SIDE LOAD ON THE CERAMIC INTERNAL TO THE SENSOR. THIS PRE-STRESS, IN COMBINATION WITH NORMAL VEHICLE USE LEADS TO PREMATURE COMPONENT MALFUNCTION."

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.