WenmarOpen by Wenmar Pro

Service bulletins for the 2024 Jeep Wagoneer

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

460 on file from NHTSA, as of 2026-10-19.

About P1CEA on the 2024 Jeep Wagoneer: what the code means, and the bulletins and recalls about the same components.

By type

By component

By trouble code

Only bulletins with trouble code: P1CEA are shown. Show all

Bulletins, newest first
18-070-262026-07-29. Service bulletin. POWER TRAIN. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **U0104-00 - Lost Communication With Cruise Control Module (NA Market Only) (In Active or Stored status). ● U0405-00 - Invalid Data Received From Cruise Control Module (NA Market Only) (In Active or Stored status). NOTE: Vehicles setting DTCs U0405-00 and U0104-00 may experience an inability to be cleared.** ● P2AF6-00 - Dual Starter Relay Stuck (in active or stored status). ● P1CEA - Boost Side EVAP Purge System Performance (in active or stored status). ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected (in active or stored status). ● P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1 (in active or stored status). ● P0071-00 - Ambient Air Temperature Sensor Performance (in active or stored status). ● P0325-00 - Knock/Combustion Vibration Sensor 1 Circuit (in active or stored status). ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low (in active or stored status). ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High (in active or stored status). ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or (in active or stored status). ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1 (in active or stored status). ● U0673-00 - Lost Communication With Ion Sense Module (in active or stored status). ● P05BD-00 - Stop-Start Mode Switch Range/Performance (in active or stored status). ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/stuck Off (in active or stored status). ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance (in active or stored status). ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking (in active or stored status). ● P0330-00 - Knock/Combustion Vibration Sensor 2 Circuit (in active or stored status). This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
91008382026-06-18. Service bulletin. FUEL/PROPULSION SYSTEM. Before replacing any parts check for applicable TSBs/RSUs. If no applicable TSBs/RSUs, or they have already been applied, please refer to the updated Service Library diagnostic procedure for P1CEA-00-BOOST SIDE EVAP PURGE SYSTEM PERFORMANCE (MODULE, Powertrain Control (PCM), 3.0L GMET6) and SOL S2518000008.
18-044-262026-03-25. Service bulletin. ENGINE. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or. (In Active or Stored status) ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance. (In Active or Stored status) ● P062B-00 - Internal Control Module Fuel Injector Control Performance. (In Active or Stored status) ● P0604-00 - Internal Control Module Random Access Memory Ram Error. (In Active or Stored status) ● P060C-00 - Internal Control Module Main Processor Performance. (In Active or Stored status)** ● P018B-00 - Fuel Pressure Sensor "B" Circuit Range/performance. **(In Active or Stored status)** ● P1CEA-00 - Boost Side EVAP Purge System Performance. **(In Active or Stored status)** ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. **(In Active or Stored status)** ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. **(In Active or Stored status)** ● P0300-00 - Multiple Cylinder Misfire. **(In Active or Stored status)** Customers may also experience one or more of the following: ● **Oil Level High Warning in the Instrument Panel Cluster (IPC).** ● Fully Autonomous Parking Assist (FAPA) is not deactivated when accelerator pedal is pressed. ● Vehicle is not heating up fast enough at freezi
18-042-262026-03-25. Service bulletin. ENGINE. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P2AF6-00 - Dual Starter Relay Stuck (in active or stored status). ● P1CEA - Boost Side EVAP Purge System Performance (in active or stored status). ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected (in active or stored status). ● P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1 (in active or stored status). ● P0071-00 - Ambient Air Temperature Sensor Performance (in active or stored status). ● P0325-00 - Knock/Combustion Vibration Sensor 1 Circuit (in active or stored status). ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low (in active or stored status). ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High (in active or stored status). ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or (in active or stored status). ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1 (in active or stored status). ● U0673-00 - Lost Communication With Ion Sense Module (in active or stored status). ● P05BD-00 - Stop-Start Mode Switch Range/Performance (in active or stored status). ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/stuck Off (in active or stored status). ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance (in active or stored status). ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking (in active or stored status). ● P0330-00 - Knock/Combustion Vibration Sensor 2 Circuit (in active or stored status). ● P032A-00 - Knock - Combustion Vibration Sensor C Circuit (in active or stored status). ● P062B-00 - Internal Control Module Fuel Injector Control Performance (in active or stored status). ● P018B-00 - Fuel Pressure Sensor "B" Circuit Range/Performance (in active or stored status). ● P00F3-00 - Humidity Sensor Circuit Range - Pe
18-044-262026-03-25. Service bulletin. ENGINE. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or. (In Active or Stored status) ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance. (In Active or Stored status) ● P062B-00 - Internal Control Module Fuel Injector Control Performance. (In Active or Stored status) ● P0604-00 - Internal Control Module Random Access Memory Ram Error. (In Active or Stored status) ● P060C-00 - Internal Control Module Main Processor Performance. (In Active or Stored status)** ● P018B-00 - Fuel Pressure Sensor "B" Circuit Range/performance. **(In Active or Stored status)** ● P1CEA-00 - Boost Side EVAP Purge System Performance. **(In Active or Stored status)** ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. **(In Active or Stored status)** ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. **(In Active or Stored status)** ● P0300-00 - Multiple Cylinder Misfire. **(In Active or Stored status)** Customers may also experience one or more of the following: ● **Oil Level High Warning in the Instrument Panel Cluster (IPC).** ● Fully Autonomous Parking Assist (FAPA) is not deactivated when accelerator pedal is pressed. ● Vehicle is not heating up fast enough at freezi
18-042-262026-03-25. Service bulletin. ENGINE. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P2AF6-00 - Dual Starter Relay Stuck (in active or stored status). ● P1CEA - Boost Side EVAP Purge System Performance (in active or stored status). ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected (in active or stored status). ● P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1 (in active or stored status). ● P0071-00 - Ambient Air Temperature Sensor Performance (in active or stored status). ● P0325-00 - Knock/Combustion Vibration Sensor 1 Circuit (in active or stored status). ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low (in active or stored status). ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High (in active or stored status). ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or (in active or stored status). ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1 (in active or stored status). ● U0673-00 - Lost Communication With Ion Sense Module (in active or stored status). ● P05BD-00 - Stop-Start Mode Switch Range/Performance (in active or stored status). ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/stuck Off (in active or stored status). ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance (in active or stored status). ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking (in active or stored status). ● P0330-00 - Knock/Combustion Vibration Sensor 2 Circuit (in active or stored status). ● P032A-00 - Knock - Combustion Vibration Sensor C Circuit (in active or stored status). ● P062B-00 - Internal Control Module Fuel Injector Control Performance (in active or stored status). ● P018B-00 - Fuel Pressure Sensor "B" Circuit Range/Performance (in active or stored status). ● P00F3-00 - Humidity Sensor Circuit Range - Pe
9100325 Rev 12025-10-08. Service bulletin. ENGINE. Before replacing any parts please refer to SOL S2518000008 if it applies to the vehicle you are working on based on a VIN search in Service Library. Before replacing this part due to Engine Light On with P1CEA (Boost Side EVAP Purge System Performance), check for: 1) Improperly connected or kinked/pinched Purge Hoses at the Ejector Tees on the Air Box or Duct. 2) Improperly connected or kinked/pinched Purge Hose at the Purge Solenoid or OBD Valve. 3) Improperly connected or kinked/pinched Purge Hose at the Intake. 4) Check for the correct Purge Hoses installation.
18-086-242024-12-18. Service bulletin. POWER TRAIN. "Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0325 - Knock/Combustion Vibration Sensor ""A"" Circuit. ● P0330 - Knock/Combustion Vibration Sensor ""B"" Circuit. ● P0300 - Multiple Cylinder Misfire. (NA Market Only) ● P032A - Knock/Combustion Vibration Sensor ""C"" Circuit. ● P018B - Fuel Pressure Sensor ""B"" Circuit Rang/Performance. ● P1CEA - Boost Side EVAP Purge System Performance. (NA Market Only)** ● P00F3 - Humidity Sensor Circuit Range/Performance. ● P06DD - Engine Oil Pressure Control Circuit Performance/Stuck Off. ● P00C6 - Fuel Rail Pressure Too Low - Engine Cranking. Customers may also comment on one or more of the following: ● **Low oil pressure Instrument Cluster Panel (IPC) warning during heavy towing. ● Engine RPM dip below idle speed during coast down to idle.** ● Undesirable vehicle drivability behavior causing a vehicle Shift to Park event during Engine Stop Start (ESS) while Adaptive Cruise Control (ACC) is active. ● Idle speed oscillations observed when in Snow and Mud modes for vehicle configured with 4x2 drivetrain. ● Screen two incorrectly pops up on the IPC for five seconds during Terrain and Rock mode. ● Fully Autonomous Parking Assist (FAPA) is not deactivated when the accelerator pedal is pressed. ● Vehicle is not heating up fast enough at freezing temperatures. **The following software calibration improvements are also available: ● Engine mega knock detection. ● Misfire during cold start. ● Avoid false failures with MIL on. (NA Market Only)** This bulletin involves reprogramming the PCM with the latest available software."
18-084-242024-11-18. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. "Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P018B-00 - Fuel Pressure Sensor ""B"" Circuit Range/performance. ● P1CEA-00 - Boost Side Evap Purge System Performance. ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/stuck Off. The following software update is also available: ● Poor AC performance in hot ambient temperatures. ● Engine speed display improvement for tachometer on the Instrument Panel Cluster (IPC) - smoother tachometer display (previous was too active). ● Prevent false fails with MIL on. This bulletin involves reprogramming the PCM with the latest available software."
18-081-24 REV.A2024-11-07. Service bulletin. POWER TRAIN. "Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P018B-00 - Fuel Pressure Sensor ""B"" Circuit Range/performance. ● P1CEA-00 - Boost Side Evap Purge System Performance. ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/stuck Off. The following software update is also available: ● Engine speed display improvement for tachometer on the Instrument Panel Cluster (IPC) - smoother tachometer display (previous was too active). ● Prevent false fails with MIL on. This bulletin involves reprogramming the PCM with the latest available software"

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.