WenmarOpen by Wenmar Pro

Service bulletin 18-044-26

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11030229
Published by NHTSA2026-03-25
Manufacturer's number18-044-26
Manufacturer's date2026-03-21
NHTSA componentENGINE

NHTSA's summary

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or. (In Active or Stored status) ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance. (In Active or Stored status) ● P062B-00 - Internal Control Module Fuel Injector Control Performance. (In Active or Stored status) ● P0604-00 - Internal Control Module Random Access Memory Ram Error. (In Active or Stored status) ● P060C-00 - Internal Control Module Main Processor Performance. (In Active or Stored status)** ● P018B-00 - Fuel Pressure Sensor "B" Circuit Range/performance. **(In Active or Stored status)** ● P1CEA-00 - Boost Side EVAP Purge System Performance. **(In Active or Stored status)** ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. **(In Active or Stored status)** ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. **(In Active or Stored status)** ● P0300-00 - Multiple Cylinder Misfire. **(In Active or Stored status)** Customers may also experience one or more of the following: ● **Oil Level High Warning in the Instrument Panel Cluster (IPC).** ● Fully Autonomous Parking Assist (FAPA) is not deactivated when accelerator pedal is pressed. ● Vehicle is not heating up fast enough at freezi

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Engine

Trouble codes named

P0011, P0071, P0072, P0073, P00C6, P0111, P0116, P018B, P0300, P05BD, P0604, P060C, P062B, P06DD, P1CEA, P25E4

Vehicles listed
CHRYSLER 3002019, 2020, 2021, 2022, 2023
CHRYSLER PACIFICA2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
CHRYSLER PACIFICA PLUG-IN HYBRID2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026 (the catalog's model; the bulletin names a series or trim of it)
CHRYSLER TOWN AND COUNTRY2019 to 2020
CHRYSLER VOYAGER2020, 2021, 2022, 2023, 2024, 2025, 2026
DODGE CARAVAN2019 to 2020
DODGE CHALLENGER2019, 2020, 2021, 2022, 2023
DODGE CHARGER2019, 2020, 2021, 2022, 2023
DODGE DURANGO2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
JEEP CHEROKEE2019, 2020, 2021, 2022, 2023
JEEP CHEROKEE2026
JEEP COMPASS2024, 2025, 2026
JEEP GLADIATOR2020, 2021, 2022
JEEP GRAND CHEROKEE2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
JEEP GRAND CHEROKEE 4XE2021, 2022, 2023, 2024, 2025, 2026 (the catalog's model; the bulletin names a series or trim of it)
JEEP GRAND CHEROKEE L2021, 2022, 2023, 2024, 2025, 2026
JEEP GRAND WAGONEER2022, 2023, 2024, 2025, 2026
JEEP WAGONEER2022, 2023, 2024, 2025
JEEP WAGONEER2026
JEEP WAGONEER S2024, 2025, 2026
JEEP WRANGLER2018, 2019, 2020, 2021, 2022
JEEP WRANGLER2025, 2026
JEEP WRANGLER 4XE2020, 2021, 2022 (the catalog's model; the bulletin names a series or trim of it)
JEEP WRANGLER 4XE2025, 2026 (the catalog's model; the bulletin names a series or trim of it)
RAM 15002019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
RAM 25002019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
RAM 35002019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
RAM 45002019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
RAM 55002019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
20256172025-11-06. Engine
25V7660002025-11-06. ENGINE
24V9260002024-12-12. STRUCTURE:FRAME AND MEMBERS; FUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY
20233382023-06-08. Engine
23V4120002023-06-08. ENGINE
23V4110002023-06-08. ENGINE AND ENGINE COOLING
20232212023-04-13. Engine
22V8650002022-11-23. ENGINE
20225842022-10-14. Engine
22V7670002022-10-13. ENGINE; FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
66D Combo Rev22026-10-16. Service campaign. Revised Customer Satisfaction Notification 66D – Spark Plugs - Dealer Notification
18-083-262026-10-16. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P2237-00 - O2 Sensor Positive Current Control Circuit/Open Bank 1 Sensor 1. ● P2240-00 - O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 1. ● P2251-00 - O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 1. ● P2254-00 - O2 Sensor Negative Current Control Circuit/Open Bank 2 Sensor 1. ● P2243-00 - O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1. ● P2247-00 - O2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 1. ● P015B-00 - O2 Sensor Delayed Response - Lean To Rich Bank 1 Sensor 1. ● P015D-00 - O2 Sensor Delayed Response - Lean To Rich Bank 2 Sensor 1. ● P2AF6-00 - Starter Relay 3 Stuck Off. ● P0E7C-00 - Coolant Bypass Valve "B" Control Circuit Low. ● P0E7D-00 - Coolant Bypass Valve "B" Control Circuit High. ● P0E7E-00 - Coolant Bypass Valve "B" Control Circuit Range/Performance. ● P0E7F-00 - Coolant Bypass Valve "B" Control Circuit Stuck/Open. ● U063C-00 - Lost Communication With Coolant Bypass Valve Actuator "B". ● P0100-00 - Mass Or Volume Air Flow Sensor "A" Circuit. ● P0101-00 - Mass Or Volume Air Flow Sensor "A" Circuit Range/Performance. ● P0461-00 - Fuel Level Sensor "A" Circuit Range/performance. ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. ● P062B-00 - Internal Control Module Fuel Injector Control Performance. ● B1810-00 - Driver Door Shorted Low. ● B25C7-00 - Redundant Driver Door Shorted Low.** ● U0673-00 - Lost Communication With Ion Sense Module (in active or stored status). ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking (in active or stored status). ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected (in active or stored status). This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
18-082-262026-10-16. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P2237-00 - O2 Sensor Positive Current Control Circuit/Open Bank 1 Sensor 1. ● P2240-00 - O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 1. ● P2251-00 - O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 1. ● P2254-00 - O2 Sensor Negative Current Control Circuit/Open Bank 2 Sensor 1. ● P2243-00 - O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1. ● P2247-00 - O2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 1. ● P015B-00 - O2 Sensor Delayed Response - Lean To Rich Bank 1 Sensor 1. ● P015D-00 - O2 Sensor Delayed Response - Lean To Rich Bank 2 Sensor 1. ● P2AF6-00 - Starter Relay 3 Stuck Off. ● P0E7C-00 - Coolant Bypass Valve "B" Control Circuit Low. ● P0E7D-00 - Coolant Bypass Valve "B" Control Circuit High. ● P0E7E-00 - Coolant Bypass Valve "B" Control Circuit Range/Performance. ● P0E7F-00 - Coolant Bypass Valve "B" Control Circuit Stuck/Open. ● U063C-00 - Lost Communication With Coolant Bypass Valve Actuator "B". ● P0100-00 - Mass Or Volume Air Flow Sensor "A" Circuit. ● P0101-00 - Mass Or Volume Air Flow Sensor "A" Circuit Range/Performance. ● P0461-00 - Fuel Level Sensor "A" Circuit Range/performance. ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. ● P062B-00 - Internal Control Module Fuel Injector Control Performance. ● B1810-00 - Driver Door Shorted Low. ● B25C7-00 - Redundant Driver Door Shorted Low.** ● U0673-00 - Lost Communication With Ion Sense Module (in active or stored status). ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking (in active or stored status). ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected (in active or stored status). This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
18-081-262026-10-16. Service bulletin. Not applicable to vehicles built for US market. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): ● P0607 - Control Module Performance. Customers may also comment on one or more of the following: ● The vehicle will not start until the ignition is cycled for a second time. ● Engine malfunction (injection) warning lamp illuminated in the Instrument Panel Cluster (IPC). This bulletin involves reprogramming the PCM with the latest available software.
18-079-262026-10-16. Service bulletin. Flash: Powertrain Control Module (PCM) Update Customers may experience a Malfunction Indicator Lamp (MIL) illumination, and the vehicle may exhibit SYMPTOM: or set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0300-00 - Multiple Cylinder Misfire - in Active or Stored status set during cold start catalyst heating. ● P0301-00 - Cylinder 1 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0302-00 - Cylinder 2 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0303-00 - Cylinder 3 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0304-00 - Cylinder 4 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0305-00 - Cylinder 5 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0306-00 - Cylinder 6 Misfire - in Active or Stored status set during cold start catalyst heating. Customers may also comment on one or more of the following: ● Vehicle has a rough idle. ● Engine has a miss. ● Noisy valvetrain. This bulletin involves inspecting the PCM software level and, if necessary, reprogramming the PCM with the latest available software.
18-074-26 REV. A2026-10-16. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P013E-00 - O2 Sensor Delayed Response - Rich to Lean Bank 1 Sensor 2. ● P014A-00 - O2 Sensor Delayed Response - Rich to Lean Bank 2 Sensor 2. ● B1811-00 - Driver Door Ajar Input Circuit Low. ● B25C7-00 -Driver Door Ajar Switch 2 Circuit Low.** ● P2AF6-00 - Starter Relay 3 Stuck Off (with DBSM). ● P014B-00 - O2 Sensor 2-2 Delayed Response-Lean To Rich. ● P062B-00 - Internal Control Module Fuel Injector Control Performance. Customers may also comment on the following: ● Electronic Start Stop (ESS) inoperative or "Auto Stop/Start Not Ready" message displayed in the Instrument Panel Cluster (IPC). NOTE: **Normal Auto Stop/Start inhibit conditions should not be considered the cause of this concern. The condition is associated with DTC P2AF6.** The following software enhancements are also available: ● **Improvements to prevent misfire DTCs P0300-P0306 that may set if one of the following DTCs set: ○ P0355-00 - Ignition Coil 5 Circuit. ○ P0336-00 - Crankshaft Position Sensor Performance.** ● Update to enable Exhaust Gas Recirculation (EGR) disable during gear shift for smoother shifting. ● Update for the Brake System Control Module (BSCM) MIL illumination request not setting the MIL on the Powertrain Control Module (PCM). This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
18-071-26 REV. B2026-10-16. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P2237-00 - O2 Sensor Positive Current Control Circuit/Open Bank 1 Sensor 1. ● P2240-00 - O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 1. ● P2251-00 - O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 1. ● P2254-00 - O2 Sensor Negative Current Control Circuit/Open Bank 2 Sensor 1. ● P2243-00 - O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1. ● P2247-00 - O2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 1. ● P015B-00 - O2 Sensor Delayed Response - Lean To Rich Bank 1 Sensor 1. ● P015D-00 - O2 Sensor Delayed Response - Lean To Rich Bank 2 Sensor 1. ● P0E7C-00 - Coolant Bypass Valve "B" Control Circuit Low. ● P0E7D-00 - Coolant Bypass Valve "B" Control Circuit High. ● P0E7E-00 - Coolant Bypass Valve "B" Control Circuit Range/Performance. ● P0E7F-00 - Coolant Bypass Valve "B" Control Circuit Stuck/Open. ● U063C-00 - Lost Communication With Coolant Bypass Valve Actuator "B". ● P0100-00 - Mass Or Volume Air Flow Sensor "A" Circuit. ● P0101-00 - Mass Or Volume Air Flow Sensor "A" Circuit Range/Performance. ● P0461-00 - Fuel Level Sensor "A" Circuit Range/performance. ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. ● P062B-00 - Internal Control Module Fuel Injector Control Performance. ● B1810-00 - Driver Door Shorted Low. ● B25C7-00 - Redundant Driver Door Shorted Low. ● U0104-00 - Lost Communication With Cruise Control Module (NA Market Only) (In Active or Stored status). ● U0405-00 - Invalid Data Received From Cruise Control Module (NA Market Only) (In Active or Stored status). NOTE: Vehicles setting DTCs U0405-00 and U0104-00 may experience an inability to be cleared. ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
18-015-26 REV. A2026-10-16. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0300-00 - Multiple Cylinder Misfire - in Active or Stored status set during cold start catalyst heating. ● P0301-00 - Cylinder 1 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0302-00 - Cylinder 2 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0303-00 - Cylinder 3 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0304-00 - Cylinder 4 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0305-00 - Cylinder 5 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0306-00 - Cylinder 6 Misfire - in Active or Stored status set during cold start catalyst heating. Customers may also comment on one or more of the following: ● Vehicle has a rough idle. ● Engine has a miss. ● Noisy valvetrain. This bulletin involves inspecting the vehicle and, if required, reprogramming the PCM with the latest available software.
66D Combo Rev22026-10-16. Service campaign. Revised Customer Satisfaction Notification 66D – Spark Plugs - Dealer Notification
18-083-262026-10-16. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P2237-00 - O2 Sensor Positive Current Control Circuit/Open Bank 1 Sensor 1. ● P2240-00 - O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 1. ● P2251-00 - O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 1. ● P2254-00 - O2 Sensor Negative Current Control Circuit/Open Bank 2 Sensor 1. ● P2243-00 - O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1. ● P2247-00 - O2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 1. ● P015B-00 - O2 Sensor Delayed Response - Lean To Rich Bank 1 Sensor 1. ● P015D-00 - O2 Sensor Delayed Response - Lean To Rich Bank 2 Sensor 1. ● P2AF6-00 - Starter Relay 3 Stuck Off. ● P0E7C-00 - Coolant Bypass Valve "B" Control Circuit Low. ● P0E7D-00 - Coolant Bypass Valve "B" Control Circuit High. ● P0E7E-00 - Coolant Bypass Valve "B" Control Circuit Range/Performance. ● P0E7F-00 - Coolant Bypass Valve "B" Control Circuit Stuck/Open. ● U063C-00 - Lost Communication With Coolant Bypass Valve Actuator "B". ● P0100-00 - Mass Or Volume Air Flow Sensor "A" Circuit. ● P0101-00 - Mass Or Volume Air Flow Sensor "A" Circuit Range/Performance. ● P0461-00 - Fuel Level Sensor "A" Circuit Range/performance. ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. ● P062B-00 - Internal Control Module Fuel Injector Control Performance. ● B1810-00 - Driver Door Shorted Low. ● B25C7-00 - Redundant Driver Door Shorted Low.** ● U0673-00 - Lost Communication With Ion Sense Module (in active or stored status). ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking (in active or stored status). ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected (in active or stored status). This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.