Service bulletins for the 2016 Jeep Renegade
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
355 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Seats are shown. Show all
| 68312314A | 2022-08-08. Service bulletin. STRUCTURE; SEATS; ELECTRICAL SYSTEM. BCM - Body Computer For MY15 and MY16 BU vehicles in NAFTA only~ Power Seats INOP & DTC B1062-11 ELECTRIC SEAT-CIRCUIT SHORT TO GROUND. Issue still present after all troubleshooting instructions were followed ~ Prior to replacing the BCM, check if relays in the PDC are seated properly, but DO NOT replace relays as no issues were found with the relays in the past.~ Take vehicle scan and bus log with the vehicle in RUN and email to Andrew Kravets: andrew.kravets@fcagroup.com before replacing the BCM. ~ Please include a description of the actions taken during troubleshooting.~ |
|---|---|
| 68312314A$ | 2018-06-11. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE; SEATS. BCM - Body Computer For MY15 and MY16 BU vehicles in NAFTA only~ Power Seats INOP & DTC B1062-11 ELECTRIC SEAT-CIRCUIT SHORT TO GROUND. Issue still present after all troubleshooting instructions were followed ~ Prior to replacing the BCM, check if relays in the PDC are seated properly, but DO NOT replace relays as no issues were found with the relays in the past.~ Take vehicle scan and bus log with the vehicle in RUN and email to Andrew Kravets: andrew.kravets@fcagroup.com before replacing the BCM. ~ Please include a description of the actions taken during troubleshooting.~ |
| 06106092A$ | 2018-05-14. Service bulletin. SEATS. Seat Relay For a Jeep Renegade or Fiat 500X ONLY, if the driver's power seat will not move in any axis and the key is in the on position with the door open: 1. Please take a Vehicle Scan Report, taking note of any active or stored DTC's, especially in the Body Control Module (BCM). 2. Before replacing the relay, call Rick Gordon at cell (248) 630-6281. If no answer leave a message and if after 15 minutes, there is no return call, proceed with the repair. 3. In the event there is no call-back, please email the Vehicle Scan Report to rick.gordon@fcagroup.com |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.