WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Jeep Compass

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

371 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Transmission and driveline are shown. Show all

Bulletins, newest first
18-046-20 REV. A2020-10-26. Service bulletin. POWER TRAIN. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience one or more of the following conditions: Reduced battery life. Intermittent Engine Stop/Start (ESS) operation.
21-046-202020-10-26. Service bulletin. POWER TRAIN. Flash: Transmission Control Module (TCM) Updates - AN-M4/1.3T-18-20200716 Refer to China Joint Venture (JV) released document AN-M4/1.3T-18-20200716 for details on this service action.
18-004-20 REV. A2020-10-26. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Flash: Powertrain Control Module (PCM) Updates - AN-M4-18-20200824 Refer to China Joint Venture (JV) released document AN-M4-18-20200824, for details on this service action.
11-004-202020-09-28. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM; FUEL SYSTEM, DIESEL. Diesel Particulate Matter Sensor - Associated to DTCs - P24D1 and P24AE This bulletin involves replacing the diesel particulate sensor when one or more of the following Diagnostic Trouble Codes (DTCs) are active in the Powertrain Control Module (PCM). Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs. P24D1-00 - Particulate Matter Sensor Regeneration Incomplete. P24AE-00 - Particulate Matter Sensor Circuit.
21-039-202020-08-24. Service bulletin. POWER TRAIN. Transmission Case Oil Leak This bulletin involves tightening the lower transmission bolts to updated torque specifications to possibly eliminate a leak at the case split line of the transmission. Customers may notice (possibly transmission) fluid leaking on the ground from the left front of the vehicle.
S20210000042020-08-24. Service bulletin. POWER TRAIN. Valve Body Learn Procedure On WiTech Shows The Transmission Is Not In The Proper Gear After Repairs
S20080000752020-07-27. Service bulletin. POWER TRAIN. No Start, Start Stop Inoperative, Cluster Messages to Service Shifter or Service Start Stop System
18-046-202020-06-22. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience one or more of the following conditions: Reduced battery life. Intermittent Engine Stop/Start (ESS) operation.
08-051-202020-05-26. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. Flash: Electronic Shift Module (ESM) Updates This bulletin involves reprogramming the Electronic Shift Module (ESM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician mayfind that the following DTC has been set:P0814-00 - Transmission Range Display Circuit. The customer may describe:PRNDM light flickers or no illumination at all. While the engine is cranking, the customer can shift out of park, resultingin engine stall
18-034-202020-05-26. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs or symptom/condition.P24B2-00 - Particulate Matter Sensor Circuit Intermittent(EBS Sales Code only). P20F6-00 - Reductant Injection Valve Stuck Open Bank 1 Unit 1(EBS Sales Code only). P208E-00 - Reductant Injector Stuck Closed - Bank 1 Unit1(EBS Sales Code only). The Engine Stop/Start (ESS) system remains in the last used state and does not default back to ON for each key cycle as designed(Vehicles on the RRT VIN list only).
S20180000032020-05-26. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. Customer complaint may include MIL/Check Engine lamp on. Upon further inspection, fault code P219A - Bank 1 Air-Fuel Ratio Imbalance may be found in the powertrain control module (PCM) as pending, active, or stored. Other fault codes P1066, P1068, P106A, or P106C (Solenoid Valve Switch Off Time Out of Range) may also be stored. Customer may also complain about loss of power or engine running rough while P219A is active.
90042442020-05-26. Service bulletin. POWER TRAIN; FUEL SYSTEM, GASOLINE. COOLER, Transmission Oil Work procedure to address fluid leak issue with the transmission oil cooler on the MP (Part # 68249191A$), KL (Part # 68399021A$) and RU (Part # 68217322A$) needs to be followed. Service Instructions for the Condition of a TOC fluid leak: 1) Mark the leakage area if visible to assist in diagnosis and determination of the area where the leak has occurred. 2) If fluid leak was caused by damage or leakage at the transmission oil cooler: - Replace transmission oil cooler - Test drive and verify no additional fluid leaks 3) If fluid leak was caused by leak at quick connect fittings: - Replace transmission oil cooler lines - Test drive and verify no additional fluid leaks
18-102-192020-01-21. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customer may also experience the following: Engine hesitation/surge feeling after a cold engine start and while driving in 2nd gear under 3000 rpm (customer may comment that the engine doesn't give full power until after a couple minutes).
09-004-192019-12-16. Service bulletin. ENGINE; POWER TRAIN. Engine Vibration Noise or Feeling When Shifting into Gear This bulletin involves replacing the rear engine mount. The customer may describe a vibration noise or feeling when in drive or reverse and the brakes are applied. This vibration can be felt in the steering wheel or seat. The new engine mount will reduce some of the normal engine vibration from transferring to the chassis.
21-040-192019-12-16. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. Flash: Transmission Control Module (TCM) Updates - AN-M4/1.3T-18-20191023 Refer to China Joint Venture (JV) released document AN-M4/1.3T-18-20191023 for details on this service action.
18-035-19 REV. D2019-12-16. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs have been set:P06E9 - Engine Starter Performance (North America Only). P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. P141B - Starter Control 1 Circuit Performance. P141C - Starter Control 2 Circuit Performance. P26E4-64 - Starter Control 2 Circuit-Signal Plausibility Failure. P0615-64 - Starter Control Circuit-Signal Plausibility Failure. In addition, the customer may notice one or more of the following conditions:Vehicle will intermittently not start(South Korea Only). Poor fuel economy. Slight engine pinging noise while accelerating and poor performance. Engine may stall while idling. The engine oil dipstick may indicate a low oil level, however the low oil pressure warning indicator doesnotilluminate in the Instrument Panel Cluster (IPC). No crank condition while pushing the start button numerous times, if they turn the vehicle off completely and then retry it will start normally. Cruise control and adaptive cruise control are inoperable. A ?Service Speed Limiter? message in the IPC and Active Vehicle Speed Limiter (AVSL) will be inoperable.There will be no stored or active DTCs with this IPC message.
18-079-192019-12-02. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience excessive oil consumption between oil change intervals.
90041502019-12-02. Service bulletin. FUEL SYSTEM, GASOLINE; POWER TRAIN. SEAL, Input If looking to replace stubshaft due to ATX fluid leaking, do not replace PTU seals. None of the seals from the PTU side will need to be replaced whenever the ATX stubshaft is replaced, even though V-seal (68408748A$) is in direct contact with the stubshaft, it will not avoid grease/oil leakage from transmission side. PTU V-seals are intended to act as a dust cover for stubshaft - PTU input shaft spline interface. PTU Input shaft seal (68408749A$) is intended to hold PTU oil and debris ingress; it should be replaced only if the fluid leakage is confirmed to be PTU oil and not ATX trans. fluid.
18-007-19 REV A2019-07-15. Service bulletin. POWER TRAIN. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs have been set:P141B - Starter Control 1 Circuit Performance. P141C - Starter Control 2 Circuit Performance. P26E4-64 - Starter Control 2 Circuit-Signal Plausibility Failure. P0615-64 - Starter Control Circuit-Signal Plausibility Failure. In addition, the customer may notice the following condition:No crank condition while pushing the start button numerous times, if they turn the vehicle off completely and then retry it will start normally. If the vehicle will has low oil level indicated by the engine oil dipstick, the low oil level warning does not appear in the cluster. A ?Service Speed Limiter? message in the Instrument Panel Cluster (IPC) and Active Vehicle Speed Limiter (AVSL) will be inoperable(ED6 only).There will be no stored or active Diagnostic Trouble Codes (DTCs) with this IPC message. Cruise control and adaptive cruise control are inoperable(ED6 only).
21-028-192019-07-15. Service bulletin. POWER TRAIN. Flash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set:P0780 - Gear Shift Malfunction. P1DD2 - Torque Request Signal From TCM Denied. Customers may also experience one or more of the following:A bump feeling and high engine RPMs. The vehicle going into limp home mode.
18-035-19 REV A2019-07-15. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set:P141B - Starter Control 1 Circuit Performance. P141C - Starter Control 2 Circuit Performance. P26E4-64 - Starter Control 2 Circuit-Signal Plausibility Failure. P0615-64 - Starter Control Circuit-Signal Plausibility Failure. In addition, the customer may notice the following condition:No crank condition while pushing the start button numerous times, if they turn the vehicle off completely and then retry it will start normally. The vehicle may have a low oil level indicated by the engine oil dipstick, however the low oil level warning indicator does not appear in the cluster. A ?Service Speed Limiter? message in the Instrument Panel Cluster (IPC) and Active Vehicle Speed Limiter (AVSL) will be inoperable.There will be no stored or active DTCs with this IPC message. Cruise control and adaptive cruise control are inoperable.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.