WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Jeep Compass

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

371 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
S26230000402026-06-16. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Passive Entry Exterior Door Handle Inoperative When Touched To Lock And Or Unlock.
S2523000003 REV.A2026-04-29. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Door Latch, Handle And Ajar Additional Service Information.
08-075-262026-03-05. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Rear Taillamp Condensation Clearing Procedure On occasion, vehicle exterior taillamp assemblies get fogged with a light layer of condensation on the SYMPTOM: inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e. a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing.
1092302026-01-14. Service bulletin. STRUCTURE:BODY. LATCH - LIFTGATE
31-001-25 REV. A2025-08-21. Service bulletin. STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-25 REV. B2025-08-21. Service bulletin. STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-252025-08-21. Service bulletin. STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
1057702025-08-06. Service bulletin. STRUCTURE:BODY. PROP - LIFTGATE
08-220-252025-07-31. Service bulletin. STRUCTURE:BODY. Rear Taillamp Condensation Clearing Procedure On occasion, vehicle exterior taillamp assemblies are fogged with a light layer of condensation on the inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e. a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing.
S25230000032025-01-16. Service bulletin. STRUCTURE:BODY. Door Latch, Handle And Ajar Additional Service Information.
31-001-242024-07-30. Service bulletin. STRUCTURE:BODY. "Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels."
08-153-242024-07-02. Service bulletin. STRUCTURE:BODY. "Rear Taillamp Condensation Clearing Procedure On occasion, vehicle exterior taillamp assemblies are fogged with a light layer of condensation on the inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e. a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing."
31001232024-01-02. Service bulletin. STRUCTURE. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
31001232023-04-17. Service bulletin. STRUCTURE. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
31-002-222023-01-17. Service bulletin. STRUCTURE. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
31001222023-01-09. Service bulletin. STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
S20210000042023-01-09. Service bulletin. POWER TRAIN; STRUCTURE. Valve Body Learn Procedure On WiTech Shows The Transmission Is Not In The Proper Gear After Repairs
31001222022-10-31. Service bulletin. STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
31001222022-10-31. Service bulletin. STRUCTURE:INTERIOR PANELS:DOOR; STRUCTURE; UNKNOWN OR OTHER. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
31002202022-10-17. Service bulletin. STRUCTURE. Aluminum Body Panel Corrosion Repair This bulletin involves inspecting and if necessary removing corrosion and refinishingthe suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
90044532022-10-17. Service bulletin. STRUCTURE; POWER TRAIN; BACK OVER PREVENTION; STEERING; WHEELS. GEAR, Rack and Pinion If looking to replace the rack and pinion due to a clunking / knocking noise, please use the Chassis Ear Tool to pinpoint the exact location of the noise following the proper diagnostics. The points where you should place the chassis ear tool in sequence are: steering column, rack and pinion, intermediate shaft or the outer tie rod of the rack and pinion. Also ensure all related components are properly torqued such as shock absorbers, steering column, lower ball joints, stabilizer links, sway bar links and cradle mount bolts (front and rear). Please contact FCA Redacted Content for feedback related ONLY to this GPOP Tech Tip. Do Not email regarding repair procedures unrelated to this Tech Tip or part order inquiries.
31005192022-09-15. Service bulletin. STRUCTURE. Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
31003192022-09-15. Service bulletin. STRUCTURE. Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
31006192022-09-15. Service bulletin. STRUCTURE; EQUIPMENT. Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
08-068-212021-05-24. Service bulletin. POWER TRAIN; EXTERIOR LIGHTING; FUEL SYSTEM, DIESEL; FUEL SYSTEM, GASOLINE; VEHICLE SPEED CONTROL; BACK OVER PREVENTION; PARKING BRAKE; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; STRUCTURE; WHEELS; AIR BAGS. Flash: Body Control Module (BCM) Updates This bulletin involves reprogramming the BCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) have been set: P0563-00 - System Voltage High(2020 M6 Vehicles equipped with 2.0L I4 Turbo Diesel Engine W/ESS (Sales Code EBS only)). P21CC?00 - Reductant Control Module Supply Voltage High(2020 M6 Vehicles equipped with (Sales Code EBS only)). P1515-00 - Plausibility Check R1 Stuck Closed Or Vsensing Short To Battery In Engine Running(2019 M6 only). B25C9 - Driver Door Ajar Switch 2 Stuck Closed (Module, Powertrain Control (PCM)). Stored DTC only, this update isnotfor active fault.If B25C9 is an active fault normal diagnostic must be performed. This software update will not correct active DTC. P26E4-64 - Starter Control 2 Circuit-Signal Plausibility Failure. In addition, customers or technicians may comment on one or more of the following:Engine Stop/Start (ESS) not functioning properly(2020 M6 Vehicles equipped with (Sales Code EBS only). Four wheel drive not functioning(2020 M6 Vehicles equipped with (Sales Code EBS only). No start condition if the vehicle has both P1515-00 and P26E4-64 DTCs(2019 M6 only). Park assist LED does not turn on(2019-20 MP/M1 and 2019 M6 only). The key fob does not work for power lift gate (Sales Code JRC)(2019-20 MP/M1 and 2019 M6 only). Vehicle Theft Alarm (VTA) sounding after remote start time out(2019-20 MP/M1 and 2019 M6 only). VTA triggers randomly. The vehicle will not restart when in Engine Stop/Start (ESS) mode. Customers will have to shift into park and cycle the ignition to get the vehicle to start again. The vehicle cranks but fails to start, the customer will see a message on the Instrument Panel Cluster (IPC) "press brake and push ignition button to start" after this happens they must perform a key cycle

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.