Service bulletins for the 2018 Infiniti Q60
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
155 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Wheels are shown. Show all
| ITB10-067C | 2023-03-07. Service bulletin. WHEELS. WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
|---|---|
| ITB20-003 | 2020-03-06. Service bulletin. WHEELS; TIRES:VALVE; TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS. 2014-2020 Q50 AND 2017-2020 Q60; TPMS SENSOR LEAKING AIR IF YOU CONFIRM The vehicle has the original equipment wheels and TPMS sensors (tire pressure sensors) installed. AND The owner states that one or more tires has a continuous air leak or looses air pressure multiple times over a 30 day period (approximatively 1 psi every 3 days). NOTE: The TPMS warning lamp may be ON (not flashing) with one or more of the following DTCs stored: • - C1704, C1705, C1706, C1707, C1730, C1731, C1732, C1733 • - If the TPMS warning lamp is flashing for more than one (1) minute this bulletin does not apply. Refer to the Electronic Service Manual (ESM) for further diagnostic information. ACTION 1. Confirm that air is leaking between the tire pressure sensor’s valve stem and valve nut of the affected wheel/tire. 2. Replace the valve stem washer/seal and the valve nut and then torque to the new specification. |
| ITB16-046a | 2018-05-21. Service bulletin. WHEELS; SUSPENSION. REVISED WHEEL ALIGNMENT SPECIFICATIONS This bulletin has been amended. The APPLIED VEHICLES were updated with new models and model years. No other changes have been made. Discard previous versions of this bulletin. |
| ITB11-005d | 2018-05-14. Service bulletin. WHEELS; ELECTRONIC STABILITY CONTROL (ESC). WHEEL BALANCING SERVICE INFORMATION This bulletin has been amended. The publication date has been revised to include the latest models and model years. No other changes have been made. Please discard previous versions of this bulletin. |
| REVISION 1 - P83 | 2018-02-21. Service bulletin. POWER TRAIN; WHEELS; STEERING. Electronic Power Steering (EPS) Voluntary Service Campaign This bulletin applies to vehicles equipped with RWD (Rear Wheel Drive) and EPS (Electronic Power Steering). UPDATE January 26, 2018 Please discard earlier versions of this bulletin The announcement from January 20, 2018 has been revised to include: - 205 retailed vehicles are being added to the previously announced quality action |
| P8301 2018 Q60 | 2018-02-21. Service bulletin. STEERING; POWER TRAIN; WHEELS. Electronic Power Steering (EPS) Retailer Inventor This bulletin applies to vehicles equipped with RWD (Rear Wheel Drive) and EPS (Electronic Power Steering). ***** Retailer Announcement *****INFINITI is updating the previously announced quality hold (PC609) from January 11, 2018 and is now instructing retailers to reprogram Electronic Power Steering (EPS) software to the most current production level on 514 specific 2018 Q60 RWD Sport and RWD Red Sport vehicles equipped with EPS. A new campaign ID (P8301) has been assigned to differentiate which vehicles have received updated software. This campaign ID will replace PC609 in Service Comm and DBS National Service History on January 20, 2018.***** What Retailers Should Do ***** PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History ? Open Campaign I.D. P8301 - New vehicles in retailer inventory can also be identified using DCS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to IPSB 15-286 for additional information - Please continue to check newly arriving inventory for quality action applicability. 2. Please do not drive, sell, or trade the specific 2018 Q60 vehicles in retailer inventory subject to this quality action until the updated software has been installed. 3. Use the attached procedure to install the updated software. 4. The service department should submit the applicable warranty claim for the action performed so it can be closed on Service Comm and release the vehicle. ***** Retailer Responsibility ***** It is the retailer?s responsibility to check Service Comm or DBS National Service History ? Open Campaigns using the appropriate campaign I.D for the quality action status on each affected vehicle currently in new vehicle inventory. INFINITI requires retailers to perform this repair on applicable new vehicles in inventory prior to being retailed to ensure client satisfaction. |
| ITB11-005c | 2017-10-12. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; WHEELS. WHEEL BALANCING SERVICE INFORMATION This bulletin has been amended. The publication date has been revised to include the latest models and model years. No other changes have been made. Please discard previous versions of this bulletin. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.