WenmarOpen by Wenmar Pro

Service bulletins for the 2016 GMC Yukon XL

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1454 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
PI1513D2017-08-15. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY; ENGINE AND ENGINE COOLING. This preliminary information bulletin provides a procedure for radiator and engine coolant thermostat replacement to eliminate coolant smell and/or a slight leak at the radiator.
PI1513C2017-08-15. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY. This preliminary information bulletin provides a procedure for radiator and engine coolant thermostat replacement to eliminate coolant smell and/or a slight leak at the radiator.
PI0281F2017-08-15. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
17-NA-1422017-08-15. Service bulletin. ELECTRICAL SYSTEM. This informational bulletin provides information on Wireless Charging Module Diagnosis.
17-NA-1262017-08-15. Service bulletin. WHEELS:LUGS/NUTS/BOLTS/STUDS. This informational bulletin provides information on Non-Design Intent Wheel Lock Nuts and Lug Nuts.
16-NA-3612017-08-15. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. This informational bulletin explains possible normal condition of a flare from 1st to 2nd, even if the trans had been repaired for the flare and its still noticed.
16-NA-3552017-08-15. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. this informational bulletin provides Information on Using MyBuick, MyCadillac, MyChevrolet, and MyGMC Phone Applications to Control GM Accessory Remote Start Kits.
16-NA-1752017-08-15. Service bulletin. POWER TRAIN. This technical bulletin provides a procedure to flush and drain fluids for the transmission to eliminate a shake and/or shudder during a light throttle acceleration between 40 and 128 KM/H (25 and 80 MPH) at a steady state.
16-NA-0422017-08-15. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; EQUIPMENT:ELECTRICAL. ?
15-06-03-002F2017-08-15. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY; EQUIPMENT. This informational bulletin provides information on approved warranty part numbers for original equipment batteries
11-00-89-005K2017-08-15. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This warranty administration bulletin provides information on Dealer Empowerment Labor Operations and Customer Enthusiasm.
10-08-110-001F2017-08-15. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This informational bulletin provides information on proper use of floor mats.
03-06-03-004U2017-08-15. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
PIT5236G2017-08-15. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will check Global Warranty Management system for customer satisfaction program 15086 status. If the status of the customer satisfaction program 15086 was not completed follow the steps to get the Telematics Communication Interface Control Module replaced. If the status of customer satisfaction program 15086 is found completed contact General Motors Technical Assistance Center OnStar group for further assistance.
PIT5438B2017-08-15. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that have a click, rattle or a squeak nose coming from the dash. Technician will use Service Information to locate the Accessory AC and DC Power Control Module located to the right of the steering column. Remove the power inverter module and apply two sided tape to the module bracket to insulate it from the mount. The instrument panel accessory bezel will also need to be removed. Apply flocking tape to the instrument panel accessory bezel retainers. Also the instrument panel extension will need to be removed. Apply foam tape around connectors located under grill to prevent them from rattling on grill. Apply flocking tape to the instrument panel extension retainers and apply a strip of foam tape along the edge of the grill to isolate the grill from the dash.
PIC61872017-08-15. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. This Preliminary Information communication advises the technician that some vehicles intermittently the favorites saved from a USB drive or SD card are grayed out and not selectable. Please communicate to the customer that we apologize for this inconvenience and that General Motors is currently evaluating this concern.
PIC61862017-08-15. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This Preliminary Information communication advises the technician that some vehicles may have a radio that turns on unwanted at start up. If the radio was shut off before the vehicle was shut off and at start up the radio turns on, please communicate to the customer that we apologize for this inconvenience, and that General Motors is working on a solution for this concern.
PIT5268A2017-08-15. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This Preliminary Information communication advises the technician that some vehicles may have a radio display that is covered when the radio station favorites list is maximized. This is a normal operating characteristic and no repair attempt should be made. The hidden screen functions will operate again after the user minimizes the favorites list by dragging it to the bottom of the display.
PIT5391A2017-08-15. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that have a no crank or a start and then immediate stall, Service Engine Soon Malfunction Indicator lamp may not be on when the ignition is in the run position, Any of the following Diagnostic Trouble Codes may be set: B1370, B1325, P0650, P263A, P263B, P0513, and/or P0262B. Trucks equipped with 4WD may have a Service 4WD message and Diagnostic Trouble Codes C0364 and/or U0403 may set. Also the sound of a relay clicking while driving or engine stays running with ignition off until door is opened. Technician will inspect all the under-hood fuse block-X50A connectors for any backed out terminals, poor terminal fit and/or bent/twisted terminals. The most common terminals with these issues have been with terminal M5 at connector X4, for circuit 5199 and terminal M7 at connector X2, for circuit 439. Technician will inspect for any backed out terminals, poor terminal fit and/or bent/twisted terminals at the left instrument panel fuse block - X51L. The most common terminals with these issues have been terminal 42 at connector X1, for circuit 5199 and terminal 44 at connector X2, for circuit 1850. Also circuit 5199 will need to be inspected and repaired under the driver?s sill plate.
PIT5206D2017-08-15. Service bulletin. ELECTRICAL SYSTEM; ENGINE; SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES. This Preliminary Information communication provides information to the technician with the steps on diagnosing and repairing vehicles that may have unwanted grade braking, reduced engine power with no Driver Information Center messages ? Brake Pedal Override Feature ?, transmission busy or frequent shifting up or down, and Diagnostic Trouble Codes P057B, P057C, and/or P057D may or may not be set. Technician will use this preliminary information to find the brake pedal position data parameters in the scan tool, and also to provide some additional diagnostic help. These issues may be caused by an incorrect brake pedal position sensor input to the engine control module. Technician will verify with the scan tool if the engine control module has the correct parameters for the brake pedal position sensor. If an engine control module brake pedal position sensor relearn is performed, the truck may be temporarily repaired until the intermittent wiring issue between the engine control module and brake pedal position sensor occurs again. On 2014 and newer trucks inspect and repair any damage to X115 and X119. On the 2014 and previous trucks inspect and repair any damage to X205.
PIT5403A2017-08-15. Service bulletin. SUSPENSION. This Preliminary Information communication provides information to the technician with the steps to diagnosis and repair vehicles with various handling, vehicle dynamics concerns, noises from the suspension or underbody, or issues related to damaged suspension components. Before any in-depth diagnostics are performed, be aware that various issues could occur if the vehicle has been modified and inform the customer the conditions noted may not be covered under warranty. Technician will inspect for installed aftermarket suspension components. Also inspect for improperly adjusted torsion bars.
PIT55002017-08-15. Service bulletin. ELECTRICAL SYSTEM:WIRING; SEATS; SEAT BELTS. This Preliminary Information communication provides information to the technician about the vehicles equipped with power folding 3rd row seat and how to diagnosis and repair seats that do not fold down completely or the 60% side does not fold even with the 40% side. Technician will inspect under the 3rd row seat for any objects that will prevent the seat from folding as designed. If the center seat belt from the roof is connected to the seat belt buckle or any of the seat belt buckles not properly stowed in the seat cushion pockets this will prevent the seat from properly folding. Also check under the 60% seat for the wire harness routing. If the harness is not routed correctly or seat connector is not properly attached to the seat bracket the seat will not fold down correctly. If the wire harness or connector is found out of place, reroute the seat harness or use a zip tie for the connector to the bracket. If the concern is still present remove the two rubber bumpers form the 60% seat side rails. After removing the rubber bumpers install a piece of Kent Automotive BRS Flocking tape P/N KT13487, or equivalent, in place of the rubber bumper.
PIC61832017-08-15. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This Preliminary Information communication provides information to the technician to help diagnose vehicles that may have a radio inoperative. This concern will last through multiple ignition cycles and is not intermittent. If Service Information diagnostics do not point to the Media Disc Player as being at fault, please continue with normal diagnostics. If SI diagnostics do point to the Media Disc Player being at fault, please do not unplug or remove power from the module or vehicle. Technician will contact General Motors Technical Assistance Center for further assistance.
PIP5382A2017-08-15. Service bulletin. ENGINE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This Preliminary Information communication advises the technician that generation 5 engines with Regular Production Option Code L83, L86, or LV3 may have an oil consumption concern were one quart in 2000 miles is being used. Dealer will confirm oil level was properly checked per Owner?s Manual, and check the bolt torque on the Valve Lifter Oil Manifold Assembly, before you contacting General Motors Product Quality Center.
PIT5232B2017-08-15. Service bulletin. ENGINE; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician the steps to diagnose and repair the concern of the display is showing 32° F (0° C) after a battery or reprogramming a module. The outside temperature will begin to update if driven above 20 mph for at least 5 minutes. If the vehicle speed drops below 20 mph, the timer will reset and the display will stop updating. Once the display starts to update it may take several more minutes of driving above 20 mph for the display to fully update. Also if the vehicle is shut off for more than 8 hours the display will update when the ignition is turned on.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.