WenmarOpen by Wenmar Pro

Service bulletins for the 2003 GMC Sonoma

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

412 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Transmission and driveline are shown. Show all

Bulletins, newest first
24-NA-1412024-08-15. Service bulletin. POWER TRAIN. GM is receiving damaged (cracked or broken) transmission cores returned to the reman facilities. The damage is being caused either in the removal process by the technician, or inadequate packaging or shipping. This bulletin advises the dealers to be more careful not to damage the transmissions during removal and to package the core properly for return.
PI1394B2024-02-02. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. This PI bulletin advises the technician on the proper way to install the pistons in an engine.
23-NA-1532023-09-26. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay.
PIP5640A2022-10-17. Service bulletin. POWER TRAIN. This Preliminary Information communication provides information to the technician to not remove the torque converter bolts and start the engine as this may cause damage to the torque converter of the crankshaft on vehicles equipped with an automatic transmission.
06-00-89-031H2022-10-11. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. This service bulletin provides information on OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification.
22-NA-1812022-09-19. Service bulletin. POWER TRAIN. This diagnostic tip advises the tech not to separate the flexplate from the torque convertor or damage my occur if the engine is started while diagnosing for noise from the engine or transmission.
06-00-89-031D2021-09-07. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN; ENGINE. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
06-00-89-031D2021-04-20. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
PIP3366C2018-08-20. Service bulletin. POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE); POWER TRAIN:AUTOMATIC TRANSMISSION. This Preliminary information communicates to the dealer technician thatLight Duty Trucks equipped with automatic transmissions and 4 wheel drive may exhibit a condition of grinding/ratcheting type noise when shifting the automatic transmission into park while the transfer case is in 4 wheel drive low (4LO) range. Dealers technician's are advised this condition should be deemed a normal characteristic of 4WD low operation.
02-07-30-052I2018-06-04. Service bulletin. POWER TRAIN; EQUIPMENT. This informational bulletin provides information for Automatic Transmission Oil Cooler Flow Test Essential Tool J-45096 TransFlow.
PIP53402017-08-15. Service bulletin. POWER TRAIN. This Preliminary Information communication provides information to the technician about vehicle that after a transmission or torque converter replacement the vehicle may have a harsh 1-2 upshift and the Check Engine Light or Service Engine Soon indicator is illuminated. If you have duplicated the customer?s concern and found Diagnostic Trouble Code P0894 or P1870 set in the Transmission Control Module please contact General Motors Technical Assistance Center.
02-07-30-052J2017-08-15. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN:AUTOMATIC TRANSMISSION:COOLING UNIT AND LINES. This informational bulletin provides technicians with information regarding automatic transmission oil cooler flow test essential tool J-45096 TransFlow®.
PIP3720D2017-08-15. Service bulletin. POWER TRAIN:AXLE ASSEMBLY. This Preliminary Information communication provides information to the technician with the axel setup information from American Axle Manufacturing. Technician should be advised that the maximum pinion shim to be used or stacked behind the pinion is 0.050?, and the minimum pinion shim is 0.020? for an 8.6 axle. The range for available pinion depth shims for the 10.5? axle is 0.006? to 0.024?. When setting the backlash it should be set between 0.003? to 0.005? on a new ring and pinion for any American Axle Manufacturing application. The ring and pinion can be reused or adjusted if the mileage is less than 500 miles, if not used for towing. Technician should be advised that a ?roller coaster? or ?hourglass? pattern on the bearings may be normal up to 10,000 miles and possibly longer. With a mis-machined housing you may get a heel pattern on both sides of the gear teeth at build up can generally be corrected with backlash adjustments. When setting up an 8.6? axle with a 5 cut gear set is to use a 0.035? pinion shim and set backlash to 0.004?. When using the newer 2 cut gear set also use a 0.035? pinion shim and still set backlash to 0.004?. To set the gear pattern use backlash to adjust the pattern heel to toe. Use the pinion shim to adjust the height of the pattern. The proper drive pinion bearing pre-load is from 15 - 30 inch pounds with new bearings. The total torque to turn after the differential case is installed should increase 5 - 10 inch pounds at the pinion. A new pinion nut must be used whenever the old one is removed. The axle shaft end play specification is 0.012? per side and the radial specification is 0.002? - 0.003?. Technician should be advised that synthetic lube can be used in all new American Axle Manufacturing axle assemblies. The new pinion seal for the 8.6? axle assembly is a two piece design.
PIP5340A2017-03-21. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER. THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLE THAT AFTER A TRANSMISSION OR TORQUE CONVERTER REPLACEMENT THE VEHICLE MAY HAVE A HARSH 1-2 UPSHIFT AND THE CHECK ENGINE LIGHT OR SERVICE ENGINE SOON INDICATOR IS ILLUMINATED. IF YOU HAVE DUPLICATED THE CUSTOMER’S CONCERN AND FOUND DIAGNOSTIC TROUBLE CODE P0894 OR P1870 SET IN THE TRANSMISSION CONTROL MODULE PLEASE CONTACT GENERAL MOTORS TECHNICAL ASSISTANCE CENTER.
PIP-3366-B2012-02-29. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. CADILLAC/CHEVROLET/GMC/HUMMER: SOME SUVS AND TRUCKS ARE EXHIBITING A CONDITION WHERE BY GRINDING/RATCHETING TYPE NOISE COMING FROM AUTOMATIC TRANSMISSION WHEN SHIFTING INTO PARK WHILE IN 4WD LOW (4LO) RANGE. *PE
PIT-47222008-12-18. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:COOLING UNIT AND LINES. GMC: FLUID LEAK FROM TRANSMISSION OIL COOLER LINES DUE TO CORROSION. ALL 2000-2006 LIGHT DUTY TRUCKS EQUIPPED WITH THE LIGHT DUTY AUTOMATIC TRANSMISSION. *PE
31362007-02-22. Service bulletin. POWER TRAIN:MANUAL TRANSMISSION; POWER TRAIN:AUTOMATIC TRANSMISSION. SLIP CONDITION IN 2ND, 3RD, OR 4TH. DAMAGED 2-4 OR 3-4 CLUTCH. *KB UPDATED 10/31/07. *NJ
007732005-10-27. Service bulletin. POWER TRAIN. 4L60E, 4L65E REPLACEMENT VALVE BODY GASKETS DOES NOT SEEM TO FIT. *TT
33002005-04-21. Service bulletin. POWER TRAIN:DRIVELINE. 4WD MODELS WITH NOISE, VIBRATION ON DRY PAVEMENT. *EH
070820042005-04-12. Service bulletin. POWER TRAIN:AXLE ASSEMBLY. REAR AXLE WATER CONTAMINATION. *EH
0404200032004-12-28. Service bulletin. POWER TRAIN:AXLE ASSEMBLY. DIAGNOSTIC INFORMATION ON REAR AXLE VENT HOSE TO AVOID MOISTURE/WATER INTRUSION. *TT
31362004-11-04. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. THE 4L60E/4L65E AUTOMATIC TRANSMISSION SLIP CONDITION IN 2ND, 3RD, OR 4TH GEAR. ALSO TO INCLUDE THE PONTIAC GTO 2005. *TC
30022004-08-23. Service bulletin. POWER TRAIN. 4L60E/4L65E INTERMITTENT NEUTRAL CONDITION WHILE ACCELERATING FROM A STOP OR WHILE DRIVING. *TT 1999-2006 GM CARS, LIGHT DUTY TRUCKS AND UTILITIES. *TT
30162004-08-23. Service bulletin. POWER TRAIN:AXLE ASSEMBLY. REAR AXLE WATER CONTAMINATION. *TT
990730016A2004-07-13. Service bulletin. POWER TRAIN. DIAGNOSTIC INFORMATION FOR INTERMITTENT TRANSMISSION DOWNSHIFT, SLIP, BUSY/CYCLING TCC OR NOISY COOLING FAN. *TT

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.