WenmarOpen by Wenmar Pro

Service bulletins for the 2021 Ford Ranger

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

113 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Instrument cluster are shown. Show all

Bulletins, newest first
SSM 504422022-02-04. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Some 2019-2022 Ranger vehicles may experience an uneven and/or excessive gap existing between the instrument panel (IP) topper and the center tray/upfitter switch assembly. This may be due to a lack of rigidity in the IP topper not allowing the tray/upfitter switch assembly to latch properly. The following foam block service kits should be used to correct this condition. For vehicles equipped with an IP tray, order service part # KB3Z-2104338-AG, which includes a new IP tray and foam blocks. For vehicles equipped with the upfitter switch assembly, order service part # KB3Z-2104338-A, which only includes the foam blocks. If a new upfitter switch assembly is required, this must be ordered separately. Follow the installation instructions included with each kit to install the foam blocks and repair the vehicle.
SSM 503052021-12-07. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Some 2019-2021 Ranger vehicles may experience an uneven and/or excessive gap existing between the instrument panel (IP) topper and the center tray/upfitter switch assembly. This may be due to a lack of rigidity in the IP topper not allowing the tray/upfitter switch assembly to latch properly. The following foam block service kits should be used to correct this condition. For vehicles equipped with an IP tray, order service part # KB3Z-2104338-AG, which includes a new IP tray and foam blocks. For vehicles equipped with the upfitter switch assembly, order service part # KB3Z-2104338-A, which only includes the foam blocks. If a new upfitter switch assembly is required, this must be ordered separately. Follow the installation instructions included with each kit to install the foam blocks and repair the vehicle.
SSM 502752021-12-07. Service bulletin. ELECTRICAL SYSTEM:WIRING:POSITION/LIMIT SENSOR/SWITCH; UNKNOWN OR OTHER; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Some 2019-2021 Ranger vehicles may experience an uneven and/or excessive gap existing between the instrument panel (IP) topper and the center tray/upfitter switch assembly. This may be due to a lack of rigidity in the IP topper not allowing the tray/upfitter switch assembly to latch properly. The following foam block service kit (SPN: KB3Z-2104338-A) should be used to correct this condition. Follow the installation instructions included with the kit to install the foam blocks into the IP topper and repair the vehicle.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.