WenmarOpen by Wenmar Pro

Service bulletins for the 2024 Ford Mustang

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

125 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
SSM 551182026-09-01. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER; STRUCTURE:BODY. Some of the following vehicles: * 2023-2025 F-Super Duty built on or before 02-Feb-2025 * 2024-2026 Ranger/Bronco/Mustang * 2024-2025 F-150 built on or before 15-Jul-2025 * 2024-2025 Nautilus built on or before 16-Feb-2025 * 2025 Explorer/Aviator built on or before 01-Feb-2025 may exhibit all of the following symptoms: - "No Key Detected" message displayed on the instrument panel cluster (IPC). - Key fob does not work in the backup slot. - Remote keyless entry (RKE) (lock and unlock from the key fob) functionality will work to lock/unlock the vehicle. If the vehicle exhibits these symptoms, start the vehicle using both key fobs. If the no crank/no start condition with "No Key Detected" concern is present, reprogram both key fobs and retest. If the no crank/no start condition with "No Key Detected" is still present, replace the body control module (BCM). Refer to Workshop Manual (WSM), Section 419-10. For claiming, use causal part 15604 and labor operation MT55118SSM up to 1.8 hours.
SSM 550612026-08-04. Service bulletin. UNKNOWN OR OTHER; STRUCTURE:BODY; VISIBILITY/WIPER. Some 2024-2026 Mustang vehicles built on or before 23-Apr-2026 may exhibit a sagging headliner appearance at the door openings which show the raw headliner edge untucked from the door glass run. An updated door glass run has been released for service (Left Side:PR3Z-6321597-B, Right side:PR3Z-6321596-B). Refer to Workshop Manual, Section 501-05.
SSM 546012026-02-27. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY; UNKNOWN OR OTHER. Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k
TSB 25-26212026-02-17. Service bulletin. STRUCTURE:BODY; POWER TRAIN; UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some vehicles listed in the Model statement above may exhibit a no crank/no start condition where the customer cannot start their vehicle. The vehicle may also exhibit a "No Key Detected" message displayed on the instrument panel cluster (IPC), and no key fob works in the back up slot. The remote keyless entry (RKE) functionality will work to lock/unlock the vehicle.
TSB 25-23862025-09-03. Service bulletin. STRUCTURE:BODY; VISIBILITY/WIPER. Some of the vehicles listed in the Model Statement above may exhibit a quarter glass rubber moulding that is rolled over or folded in. This may be due to the installation of the quarter glass assembly.
TSB 24-20902024-04-04. Service bulletin. EQUIPMENT; STRUCTURE. Some 2024 Mustang vehicles may exhibit water entry into the front foot wells. This may be due to a missed body sealer application at the factory. To correct this condition, follow the Service Procedure to apply additional body sealer.
TSB 23-23022023-11-02. Service bulletin. STRUCTURE:BODY:BUMPERS; EQUIPMENT. Some 2024 Mustang vehicles may exhibit a condition where the rear bumper cover has poor fitment and/or excessive body gap where it meets the quarter panel. This may be due to incorrect installation and/or missing panel adhesive tape. To correct this condition, follow the Service Procedure to apply panel adhesive tape and re-install the rear bumper cover.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.