WenmarOpen by Wenmar Pro

Service bulletins for the 2016 Ford Focus

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

216 on file from NHTSA, as of 2026-10-19.

About P26FE on the 2016 Ford Focus: what the code means, and the bulletins and recalls about the same components.

By type

By component

By trouble code

By topic

Only bulletins with trouble code: P26FE are shown. Show all

Bulletins, newest first
tsb17-22172017-12-14. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2016-2017 Focus RS vehicles built on or before 02-Aug-2017 may exhibit an Unable to Change Drive Mode message in the instrument panel cluster (IPC) and/or an illuminated malfunction indicator lamp (MIL) with DTC P26FE stored in the powertrain control module (PCM) memory. Reprogram the PCM to the latest calibration using Integrated Diagnostic System (IDS) or Ford J2534 Diagnostic Software (FJDS) release 106.04 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com.
TSB 17-20632017-08-01. Service bulletin. ELECTRICAL SYSTEM; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Some 2016-2017 Focus RS vehicles built on or before 03-Apr-2017 may exhibit an Unable to Change Drive Mode message in the instrument panel cluster (IPC) and/or an illuminated malfunction indicator lamp (MIL) with DTC P26FE stored in the powertrain control module (PCM) memory. This may be due to a sticking exhaust valve when the temperature is below freezing. Reprogram the PCM to the latest calibration using IDS release 104.05 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com
SSM 463372017-03-15. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). SOME 2016-2017 FOCUS RS VEHICLES MAY EXHIBIT A MESSAGE DISPLAYED IN THE INSTRUMENT PANEL CLUSTER (IPC) THAT STATES DRIVE MODE SELECTION NOT POSSIBLE. DIAGNOSTIC TROUBLE CODE (DTC) P26FE MAY ALSO BE PRESENT IN POWERTRAIN CONTROL MODULE (PCM) MEMORY. DTC P26FE IS SET WHEN THE PCM IS UNABLE TO COMMAND THE TAILPIPE ACTUATOR TO MOVE. THIS CONCERN MAY BE CAUSED BY LOW TEMPERATURES (BELOW FREEZING) WHEN STARTING THE ENGINE. AFTER ABOUT 180 SECONDS, AND A KEY CYCLE, THE SYSTEM WORKS AS DESIGNED. THE ISSUE IS CURRENTLY UNDER ENGINEERING INVESTIGATION, DO NOT ATTEMPT ANY REPAIRS AT THIS TIME. MONITOR OASIS FOR FUTURE UPDATES. FOR ADDITIONAL TAILPIPE ACTUATOR INFORMATION REFER TO WORKSHOP MANUAL (WSM), SECTION 309-00.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.