WenmarOpen by Wenmar Pro

Service bulletins for the 2016 Ford Focus

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

216 on file from NHTSA, as of 2026-10-19.

About P0300 on the 2016 Ford Focus: what the code means, and the bulletins and recalls about the same components.

By type

By component

By trouble code

By topic

Only bulletins with trouble code: P0300 are shown. Show all

Bulletins, newest first
TSB18-20932018-05-21. Service bulletin. ENGINE AND ENGINE COOLING. Some 2015-2018 Focus ST vehicles may exhibit a misfire condition and/or illuminated MIL with DTCs P0300 and/or P0316 with engine coolant temperature below 49°C (120°F). Follow the Service Procedure steps to correct the condition.
SSM 469072018-01-29. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Some 2015-2018 Focus ST vehicles may exhibit MIL On with DTC's P0300 and/or P0316 store in Powertrain Control Module(PCM) memory. Vehicle may also exhibit perceived misfire after cold start until Engine Coolant Temperature(ECT) reaches 49 degrees C (120 degrees F) Install (4) new CYFS-12-YEC spark plugs and set plug gap to 1.0mm(0.040). Use ROTUNDA RTTP tool KDT165 or equivalent to gap and adjust the plugs before installing. For Drivability concerns Refer to Powertrain Control/Emissions Diagnosis (PC/ED) manual. Engineering is currently investigating this concern. To assist with the investigation use the Report A Vehicle Concern link at the bottom of the Oasis report and submit a Global Concern Report (GCR). Continue to monitor OASIS for updates.
SSM 465392017-08-01. Service bulletin. ENGINE; EQUIPMENT. Some 2015-2017 Focus ST vehicles may exhibit MIL On with a perceived Misfire after cold start. Diagnostic Trouble Codes DTC's) may include P0300, P0301, P0302, P0303,P0304, and P0316. Refer to General Service Bulletin GSB) G0000106 to confirm Historical DTCs no longer confirmed or pending, but have set at least once since the last time DTCs were cleared. Refer to Workshop Manual (WSM) Section, 303-01 and Powertrain Control/Emissions Diagnosis (PC/ED) manual for normal diagnostics. To assist with the investigation use the Report A Vehicle Concern link at the bottom of the OASIS report and submit a Global Concern Report (GCR). Engineering is currently investigating this concern. Continue to monitor OASIS for updates.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.