WenmarOpen by Wenmar Pro

Service bulletins for the 2018 Ford F-750

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

106 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Steering are shown. Show all

Bulletins, newest first
SSM 521882024-01-24. Service bulletin. STEERING. 2024 F-Super Duty vehicles are equipped with XL-22 (WSS-M2C184-A1) high temperature power steering fluid that looks like clear hydraulic fluid. This fluid is an improvement in high temperature and thermal oxidative stability compared to Mercon LV. This power steering fluid is also compatible and highly recommended to use when filling or topping off power steering systems of all 2012-2023 F-Super Duty vehicles originally equipped with Mercon LV.
SSM 476382019-01-07. Service bulletin. STEERING; STEERING: STEERING WHEEL/HANDLE BAR. 2013-2019 vehicles equipped with a LKS system with customer complaints of steering wheel vibration, steering pull or vehicle drift may be due to an alert and/or steering aid input from the LKS. The LKS system detects unintentional drifting toward the outside of the lane and alerts and/or aids vehicle to stay in the lane. Be sure the customer understands how the lane departure warning feature settings work for Alert (steering wheel vibration) and Aid (steering input toward lane center). Further information on the LKS can be found in the owners manual. If the customers concern is due to the LKS functioning as intended, do not attempt to repair.
SSM 471032018-05-14. Service bulletin. STEERING. Some 2017-2018 Continental/F-Super Duty vehicles may exhibit a DTC B13BD in the steering effort control module (SECM). This DTC sets when the Ford Integrated Diagnostic System (IDS) self test is run and is a result of a software issue between the SECM and the IDS. After the IDS self test is run DTC B13BD sets and the heated steering wheel is disabled. To eliminate the DTC and return the heated steering wheel functionality, perform the IDS SASM module reset routine. The IDS reset routine is available under Toolbox > Chassis > Steering > Adaptive Front Steering > SASM Module Reset. For claiming, use causal part 3600 and applicable labor operations in section 10 of the service labor time standards (SLTS) manual.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.