WenmarOpen by Wenmar Pro

2018 Ford F-750

Vehicle
Drive4x2
Vehicle typeIncomplete Vehicle
Vehicle id2018_ford_f-750
Recalls6 recall campaigns may apply
Bulletins106 manufacturer bulletins on file

Shares campaigns and bulletins with

Worked out from the recall campaigns and bulletins that list both. It does not mean a part or a repair for one fits the other.

Maintenance updates from the manufacturer

Maintenance bulletins from NHTSA, as of 2026-10-19
SIL 7902021-04-06. It has been discovered that some hydraulic lines installed by Altec may be in contact with chassis air brake line(s). Some DOT inspections have considered this to be a violation of federal regulation 49 CFR § 393.45 b 2. Over time, chafing of the air brake line(s) could result in loss of air pressure and reduction in braking performance. Altec requires the routing of the hydraulic lines to be inspected no later than the next periodic maintenance interval. The affected unit are some T40P cable placers installed on Ford F750 chassis from May 2015 to January 2020 NHTSA's copy of the document (PDF)
SSM 470282018-06-11. Some 2011-2018 F-Super Duty 6.7L diesel equipped vehicles may exhibit a ticking noise at idle after an engine oil change. It is often referred to as Typewriter Noise because of its similarity to the sound of a mechanical typewriter. When engine temperatures reach 150 Å?F (65 Å?C) or higher, (from engine idle up to approximately 1700 RPM's), this noise can typically be heard at the front wheel well and is often isolated to the transmission bell housing or oil pan area. Typewriter Noise is not detrimental to engine function or durability and has no short or long term effects on the engine. Do not attempt repairs to eliminate this noise. This noise is characteristic of the 6.7L diesel engine and will typically cease or diminish significantly within the oil change maintenance interval. NHTSA's copy of the document (PDF)
SSM 470282018-05-29. Some 2011-2018 F-Super Duty 6.7L diesel equipped vehicles may exhibit a ticking noise at idle after an engine oil change. It is often referred to as Typewriter Noise because of its similarity to the sound of a mechanical typewriter. When engine temperatures reach 150 Å?F (65 Å?C) or higher, (from engine idle up to approximately 1700 RPM's), this noise can typically be heard at the front wheel well and is often isolated to the transmission bell housing or oil pan area. Typewriter Noise is not detrimental to engine function or durability and has no short or long term effects on the engine. Do not attempt repairs to eliminate this noise. This noise is characteristic of the 6.7L diesel engine and will typically cease or diminish significantly within the oil change maintenance interval. NHTSA's copy of the document (PDF)

Bulletins from the manufacturer that mention a maintenance schedule or a service interval, as NHTSA summarises them. They are not the schedule itself: read the document, and the owner's manual.

Trims
F-Series Super Duty4x2
Engines
6.7L V8 DieselEighth VIN character C, E or X
6.8L V10Eighth VIN character Y

Position 8 of a VIN names the engine on many vehicles: how to read a VIN. Safety equipment depends on the trim, so decode a VIN to see what one vehicle has.

Other years of the F-750