WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Ford F-150

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

332 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
TSB 19-22822019-10-04. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA; ELECTRICAL SYSTEM. Some 2019 Mustang, Continental, Fusion, MKZ, F150, Transit Connect, Ranger, Edge or Nautilus with SYNC 3 may have the following intermittent symptoms: a solid blue screen when moving forward at speeds above 16 kph (10 mph), the rear view camera remains on the screen at speeds below 16 kph (10 mph), or inoperative infotainment applications. This may be due to the SYNC 3 software version installed on the vehicle. To correct the condition, follow the Service Procedure steps to reprogram the accessory protocol interface module (APIM).
TSB 19-22302019-10-04. Service bulletin. POWER TRAIN. Some 2018-2019 F-150 vehicles equipped with a 5.0L engine built on or before 12-Feb-2019 may exhibit a rattling sound coming from the transmission bellhousing area. This may be due to the torque converter studs contacting the engine to transmission spacer plate. To correct the condition, follow the Service Procedure steps to replace the engine to transmission spacer plate with a new engine to transmission spacer plate that includes a bend for additional clearance.
SSM 481352019-09-09. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Some 2013-2020 vehicles equipped with an EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function. To support the proper diagnosis of this compressor, the EVDC control valve tester has been provided to each U.S. dealership (339-EVDC100). Ensure the A/C system has a full charge prior to any compressor diagnostics. To support the proper diagnosis of this compressor, the EVDC compressor tool must be used, and the results recorded in the Technician comments field with the warranty claim. This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.
SSM 481302019-09-06. Service bulletin. VISIBILITY:GLASS, SIDE/REAR; VISIBILITY. Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid damage is not a defect in material or workmanship and is not a warrantable condition.
SSM 481272019-09-06. Service bulletin. SUSPENSION. 2019 F-150 Raptor vehicles that require service of the shock absorber solenoid or wiring can be repaired with replacement of the solenoid separately from the shock absorber. The solenoid can be serviced without removing of the shock from the vehicle. Refer to step 1 of the shock absorber installation procedure in the Workshop Manual (WSM), Section 204-01 and 204-02 for detailed solenoid installation information. Part Numbers: Right Front KL3Z-18B082-A, Left Front KL3Z-18B082-B, Right Rear KL3Z-18B084-A, Left Rear KL3Z-18B084-B.
SSM 481262019-09-06. Service bulletin. FUEL SYSTEM, DIESEL. Some 2018-2019 F-150 vehicles equipped with a 3.0L diesel engine may exhibit fuel spit back, a stuck fuel nozzle and/or damaged fuel tank filler pipe. This may be due to some fuel stations using larger than standard filler nozzle sizes. The F-150 fuel tank filler pipe has been designed for use with a standard automotive diesel nozzle which is 23.6 mm (0.929 inch) to 25.5 mm (1.004 inch) in diameter. The fuel filler pipe is not compatible with larger diameter or commercial style fuel filler nozzles used by some fuel stations. Fuel spit back, slow fill, stuck fuel nozzles, or damage resulting from larger diameter fuel nozzles is not a warrantable defect. Do not submit a claim for this condition.
SSM 481232019-09-06. Service bulletin. ELECTRICAL SYSTEM. For Ford and Lincoln vehicles that require positive or negative battery terminal replacement, it is not necessary to replace the complete battery cable harness (14300 and 14301) for this concern. Positive battery cable clamp BT4Z-14450-AA and negative battery cable clamp BT4Z-14450-BA are available for this type of repair. Do not cut or shorten the battery cable, instead carefully remove the affected battery cable clamp and clean the cable end as necessary to preserve wire length. Some rework may be necessary for some vehicle environments. Bend the new positive battery cable clamp as needed and crimp it to the existing battery cable. Make sure to use heat shrink tubing over the battery cable to battery cable clamp connection. Obtain the heat shrink tube locally.
TSB 19-21892019-09-06. Service bulletin. ENGINE AND ENGINE COOLING. Some 2018-2019 F-150 vehicles equipped with a 2.7L EcoBoost engine built on or before 21-May-2019 may exhibit an oil leak from the engine oil pan RTV seal. To correct the condition, follow the Service Procedure steps to replace the oil pan with a new oil pan equipped with a press-in-place gasket.
TSB 19-22592019-09-06. Service bulletin. ENGINE AND ENGINE COOLING. Some 2019 F-150 vehicles equipped with a 2.7L EcoBoost engine built on before 14-Aug-2019 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P04DB stored in the powertrain control module (PCM). This may be due to a strategy within the PCM software. To correct the condition, follow the Service Procedure to update the PCM calibration.
TSB 19-22572019-09-06. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. Some 2018-2019 F-150 vehicles equipped with a 2.7L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0471 stored in the powertrain control module (PCM). This may be due to the exhaust pressure sensor. To correct the condition, follow the Service Procedure to replace the exhaust pressure sensor.
SSM 481082019-08-07. Service bulletin. ELECTRICAL SYSTEM. Some 2015-2019 vehicles may experience a no crank concern due to a security access key table error. When attempting to program keys or perform a parameter reset, the procedure may fail and the appropriate Ford diagnostic scan tool may display an error 232: Key Table Not Allocated. If this error message is encountered, the body control module (BCM) is internally damaged and requires replacement. The BCM should only be replaced for this condition when the 232 key table error message is present. If the 232 key table error is not present, follow normal diagnostics for the no crank condition. For claiming, use causal part 15604 and applicable labor operations in section 10 of the Service Labor Times Standards (SLTS) manual.
SSM 480882019-08-07. Service bulletin. POWER TRAIN. 2019 F-150/Expedition/Navigator vehicles equipped with four-wheel drive (4WD) have a revised transfer case control module (TCCM) strategy that will affect integrated wheel end (IWE) operation after initial start up. The TCCM will not energize the solenoid to supply vacuum to the IWEs after the initial key cycle and a driven gear is selected. The IWEs will remain engaged for 0.8 km (0.5 mi) when the temperature is above 0Å’C (32Å’F) and 3 km (2 mi) when below 0Å’C (32Å’F). The strategy changes were implemented to improve vacuum supply management and axle warm up in cold temperatures. The engine must run for a minimum of 5 minutes to build sufficient vacuum before performing any vacuum related testing. Refer to the Workshop Manual (WSM) Section, 307-08A - Four-Wheel Drive Systems - System Operation and Component Description for additional information.
SSM 480822019-08-07. Service bulletin. POWER TRAIN. Some 2015-2018 F-150/Expedition/Navigator vehicles equipped with a 3.5L/2.7L EcoBoost engine and four-wheel drive (4WD) may exhibit an intermittent grinding type noise while driving in two-wheel drive (2WD), most commonly on acceleration. This noise could appear to be turbocharger related. After engineering analysis of returned turbochargers that have been replaced for this condition, no concerns were identified with the turbochargers. The grinding type noise may be related to the 4WD system integrated wheel ends (IWE). To aid in diagnosis, shift the vehicle to 4WD and attempt to verify the condition. If the grinding noise no longer occurs with the vehicle in 4WD a IWE vacuum system and/or mechanical fault may be present.
TSB 19-22322019-08-06. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV); ENGINE AND ENGINE COOLING. Some 2017-2019 F-150 and 2018-2019 Expedition/Navigator vehicles built on or before 1-Apr-2019 and equipped with a 3.5L EcoBoost engine may exhibit excessive oil consumption with no visible oil leaks with or without diagnostic trouble code (DTC) P0365 and/or P0369. This may be due to a concern with the positive crankcase ventilation (PCV) system. To correct the condition, follow the Service Procedure steps to verify the condition and replace the valve covers.
19B152019-07-08. Service bulletin. ENGINE AND ENGINE COOLING. Customer Satisfaction Program 19B15: Certain 2019 Model Year F150, Expedition, Navigator and Transit Vehicles Equipped with a 3.5L EcoBoost Engine - Cam Cover Torque
SSM 480422019-07-08. Service bulletin. SERVICE BRAKES, HYDRAULIC; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; EQUIPMENT ADAPTIVE/MOBILITY. Some 2018-2019 F-150, Expedition, and Navigator vehicles may exhibit a concern of inoperative adaptive cruise control with no associated diagnostic trouble code (DTC). This concern may occur if the hot in run or start switched power is not present at the anti-lock brake system (ABS) module on circuit CBB17. A load test is recommended to test the ABS module power and ground circuits.
SSM 480292019-07-08. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV); ENGINE AND ENGINE COOLING. Some 2018-2019 F-150 vehicles built on 23-Sep-2018 and through 28-Mar-2019 and 2019 Edge/Nautilus/Continental/MKZ vehicles built on 4-Dec-2018 and through 29-Mar-2019 and Fusion vehicles built on 16-Jan-2019 and through 12-Apr-2019 equipped with a 2.7L/3.0L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P04DB stored in the powertrain control module (PCM). This may be due to the incorrect positive crankcase ventilation (PCV) valve installed. If the PCV valve is brown in color, refer to the Powertrain Control/Emissions Diagnosis (PC/ED) Manual for normal diagnostics. If the PCV valve is gray in color, replace the PCV valve, clear the DTC, and retest. If the DTC returns, refer to the PC/ED for normal diagnostics.
TSB 19-22062019-07-03. Service bulletin. EQUIPMENT. Some 2015-2019 F-150 vehicles may exhibit a glove compartment door that appears misaligned along the storage tray or right side instrument panel when closed. This may be due to the position of the glove compartment storage tray rubber mat or the seating of the glove compartment door strikers or glove compartment door hinge pins. To resolve the condition, follow the Service Procedure steps to reposition or adjust the affected component.
SSM 479762019-06-07. Service bulletin. POWER TRAIN. On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop Manual (WSM), Section 307-01.
SSM 479832019-06-06. Service bulletin. ENGINE AND ENGINE COOLING. Some 2017-2019 F-150 and 2018-2019 Expedition/Navigator vehicles equipped with a 3.5L EcoBoost engine built on or before 1-Apr-2019 may exhibit excessive oil consumption with or without diagnostic trouble code (DTC) P0365 and/or P0369. If there are no visible external oil leaks, replace both valve covers. Refer to Workshop Manual, Section 303-01. For claiming, use causal part 6582 and applicable labor operations in Section 6 of the Service Labor Time Standards (SLTS) Manual.
SSM 479672019-06-06. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Some 2013-2019 vehicles equipped with a EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function and/or a diagnostic trouble code (DTC) P06A0 in the powertrain control module (PCM). To support the proper diagnosis of this compressor, the EVDC control valve tester has been developed and is available from Rotunda (339-EVDC100). A tester has been provided to each U.S. dealership free of charge with shipments completed 19-Apr-2019 (reference EFC07013 on FMCDealer.com). This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Make sure that this tester is used for warranty repairs and document the test results in the Technician Comments field. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.
SSM 479612019-06-06. Service bulletin. ENGINE AND ENGINE COOLING. Some 2018-2019 F150, Expedition, and Navigator vehicles equipped with a 3.5L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0365 and/or P0369 stored in the powertrain control module (PCM). This may be due to low engine oil level, low engine oil pressure, or worn/damaged variable camshaft timing (VCT) units. Before performing Powertrain Control and Emissions Diagnosis (PC/ED) Manual diagnostics, inspect the engine oil level and evaluate any abnormal VCT noise conditions. If engine oil level is correct and no unusual engine noises are present, proceed with normal diagnostics per PC/ED pinpoint test (PPT) DR.
TSB19-21402019-06-05. Service bulletin. ENGINE AND ENGINE COOLING. Some 2018-2019 F-150 and Mustang vehicles equipped with a 5.0L engine built on or before 30-Apr-2019 may exhibit a chirping type noise from the upper engine front cover area at warm or hot idle. This noise may sound similar to a front engine accessory drive (FEAD) chirp noise. This may be due to the primary timing chain tensioner oil pressure relief valve. To correct the condition, replace the primary timing chain tensioners. Follow the Service Procedure.
TSB19-21322019-06-05. Service bulletin. ENGINE AND ENGINE COOLING. Some 2018-2019 F-150 vehicles equipped with a 3.5L EcoBoost or 2.7L EcoBoost engine and some 2018-2019 Expedition and Navigator vehicles equipped with a 3.5L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P04F0 and/or P144C stored in the powertrain control module (PCM). This may be due to loose or partially connected evaporative emissions (EVAP) vapor lines. Before completing the Powertrain Control/Emissions Diagnosis (PC/ED) Manual pinpoint test (PPT) HX follow the Service Procedure.
TSB19-21222019-06-05. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT:APPLIANCE:AIR CONDITIONER. Some 2015-2019 F-150 vehicles equipped with a 3.3L, 3.5L Duratec, 3.5L EcoBoost and 5.0L engine without a block heater built on or before 1-Jan-2019 may exhibit a lack of heat concern from the heating ventilation and air conditioning (HVAC) system when operating the vehicle in temperatures consistently below -20Å’C (4Å’F). This condition may be due to deposits from the engine coolant becoming trapped in the heater core. To correct the condition, flush the cooling system and replace the heater core. Follow the Service Procedure steps to correct the condition.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.