WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Ford F-150

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

332 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Driver assistance are shown. Show all

Bulletins, newest first
25N172026-03-27. Other. LANE DEPARTURE: BLIND SPOT DETECTION; BACK OVER PREVENTION: WARNINGS; BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING; UNKNOWN OR OTHER. Advance Notice – Customer Satisfaction Program 25N17 Certain 2015-2025 Model Year Multiple Vehicle Lines Rear View Camera Replacement If Required After Dealer Evaluation
SSM 512632023-01-06. Service bulletin. BACK OVER PREVENTION; STRUCTURE:BODY:DOOR. Some 2015-2023 F-150, 2017-2022 F-Super Duty, and 2019-2023 Ranger vehicles may exhibit dust ingress into the cabin through the doors or air extractors. This may be due to the climate control system being in recirculation mode as a result of the recirculation button being on or automatic strategies for heating/cooling efficiency. To minimize dust ingress when driving in off-road or secondary road conditions, make sure that all doors and windows are fully closed and the climate control system is switched to defrost on and the instrument panel and footwell air vents are switched to off. Temperature and fan settings may be adjusted as desired. Alternatively, max defrost can be activated which will adjust all settings automatically. Operating in defrost mode will keep constant air flow through the rear air extractors and other small areas, helping minimize dust ingress.
TSB 22-22542022-07-01. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Some 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Mustang/Ranger/Transit Connect, 2020-2021 EcoSport/Escape/Expedition/Explorer/F-Super Duty/Aviator/Corsair/Navigator, 2021 Bronco Sport and 2020-2022 Explorer/Aviator vehicles with SYNC 3 may experience various SYNC performance related concerns. This may be due to the SYNC Software. To correct the condition, follow the Service Procedure to update the accessory protocol interface module (APIM) software.
21N03-S22021-09-30. Service bulletin. ELECTRICAL SYSTEM:ADAS:CONTROL MODULE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE. Certain 2017-2020 Model Year F-150, 2018-2020 Expedition, and 2018-2020 Navigator Vehicles Equipped with a 3.5L GTDI Engine Cam Phaser Replacement; Owner letters are scheduled to mail during the week of September 27, 2021• Submitting Claims with Ford Protect for Balance Remaining: Added instruction on how to claim the customer paid portion of the FSA with Ford Protect.• Submitting Claims with Customer Loyalty Program for Balance Remaining: Added instruction on how to claim the customer paid portion of the FSA using CLP Funds. This program extends the warranty coverage of the engine cam phasers until January 1, 2023 provided the Repair Order (RO) date of Powertrain Control Module reflash under Customer Satisfaction Program 21B10 occurs on or before February 28, 2022
SSM 492172020-10-06. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM:ADAS:BLINDSPOT:SOFTWARE. Some 2015-2020 F-150/Mustang, 2016-2020 Edge, 2016-2018 MKX and 2019-2020 Nautilus vehicles built on or before 18-Jan-2020 may exhibit a mirror click and/or ratcheting noise when using memory functions or easy entry/exit function. This may be due to the software in the driver door module (DDM) and passenger door module (PDM). To correct the condition, reprogram the DDM and PDM with the latest software level of the appropriate Ford diagnostic scan tool. For claiming use causal part 14B291 and applicable labor times in Section 10 of the Service Labor Time Standards (SLTS) Manual.
TSB 20-23012020-10-01. Service bulletin. ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:SOFTWARE; BACK OVER PREVENTION: CAMERA SYSTEM. Some 2019 MKZ, 2019-2020 Mustang/Continental/Fusion/F-150/Transit Connect/ Ranger/Edge/Nautilus and 2020 Escape/Corsair/Aviator/Explorer/Expedition/ Navigator/F-Super Duty vehicles with SYNC 3 may experience various SYNC performance related concerns. To correct the condition, follow the Service Procedure.
TSB 20-22672020-10-01. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM:ADAS:DRIVER MONITORING:CAMERA/SENSOR. Some 2015-2020 F-150 except Raptor, 2017-2020 F-Super Duty, 2018-2020 Expedition vehicles equipped with a front camera washer may exhibit a washer fluid leak at the front camera washer jet when not in use. This may be due to the rubber seal internal to the jet. To correct the condition, follow the Service Procedure to replace the washer jet.
SSM 489342020-07-07. Service bulletin. FORWARD COLLISION AVOIDANCE: WARNINGS. Some 2018-2019 Explorer/Expedition/F-150/F-Super Duty/Taurus vehicles equipped with a forward collision warning head up display (HUD) may exhibit various warning indicators caused by a possible intermittent lack of HS2-CAN network communication. If the concern cannot be duplicated, place the vehicle in direct sunlight for 15 to 30 minutes to increase the temperature of the HUD and retest. If the concern is present, disconnect the HUD and check for proper HS2-CAN network communication. If proper HS2-CAN network communication is achieved, then HUD module replacement is likely needed. If disconnecting the HUD does not re-establish communication, the HUD is not at fault, refer to Workshop Manual (WSM), Section 418-00, PPT AL for diagnostics.
TSB 20-20462020-03-03. Service bulletin. TRACTION CONTROL SYSTEM; SERVICE BRAKES, AIR:ANTILOCK. Some 2018-2019 F-150 vehicles built at Dearborn Truck Plant on 17-Jul-2017 and through 4-Aug-2019 or Kansas City Assembly Plant on 14-Aug-2017 and through 6-Aug-2019 equipped with a 3.5L EcoBoost engine, 3675 mm (145 in) wheelbase, XL/STX trim package, and max trailer tow package (towing pack 1) may exhibit a stability control, traction control and/or Advance Tracù warning message in the instrument panel cluster (IPC) message center with diagnostic trouble code (DTC) C0051:54 and/or C0051:64 stored in the anti-lock braking system (ABS) module. This maybe due to one or more software parameters in the ABS module. To correct the condition, follow the Service Procedure steps to reprogram the ABS module.
TSB 19-22822019-10-04. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA; ELECTRICAL SYSTEM. Some 2019 Mustang, Continental, Fusion, MKZ, F150, Transit Connect, Ranger, Edge or Nautilus with SYNC 3 may have the following intermittent symptoms: a solid blue screen when moving forward at speeds above 16 kph (10 mph), the rear view camera remains on the screen at speeds below 16 kph (10 mph), or inoperative infotainment applications. This may be due to the SYNC 3 software version installed on the vehicle. To correct the condition, follow the Service Procedure steps to reprogram the accessory protocol interface module (APIM).
SSM 480422019-07-08. Service bulletin. SERVICE BRAKES, HYDRAULIC; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; EQUIPMENT ADAPTIVE/MOBILITY. Some 2018-2019 F-150, Expedition, and Navigator vehicles may exhibit a concern of inoperative adaptive cruise control with no associated diagnostic trouble code (DTC). This concern may occur if the hot in run or start switched power is not present at the anti-lock brake system (ABS) module on circuit CBB17. A load test is recommended to test the ABS module power and ground circuits.
TSB 19-20042019-04-08. Service bulletin. FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. Some 2015-2016 F-150 vehicles built on or before 01-Feb-2016, 2019 F-150 vehicles built on 11-Oct-2018 and through 15-Nov-2018 and 2019 F-Super Duty vehicles built on 10-Oct-2018 and through 27-Nov-2018 equipped with adaptive cruise control may exhibit an unintended deceleration event while passing a large object such as a tractor trailer. Follow the Service Procedure steps to correct the condition.
TSB 19-20042019-04-01. Service bulletin. FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. Some 2015-2016 F-150 vehicles built on or before 01-Feb-2016, 2019 F-150 vehicles built on 11-Oct-2018 and through 15-Nov-2018 and 2019 F-Super Duty vehicles built on 10-Oct-2018 and through 27-Nov-2018 equipped with adaptive cruise control may exhibit an unintended deceleration event while passing a large object such as a tractor trailer. Follow the Service Procedure steps to correct the condition.
SSM 477082019-03-04. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA; EQUIPMENT; ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY. Some 2019 Mustang, Continental, Fusion, MKZ, F150, Edge or MKX with SYNC 3 may have a symptom of a rear view camera that remain on the screen when moving forward above 5MPH or a solid blue screen once the vehicle is at cruising speed. To eliminate this symptom from occurring, it is recommended to disable the Wi-Fi in the settings menu by selecting Automatic updates. Shut off system WIFI and then disable automatic updates. If the vehicle is stuck in the rear camera state you can exit this state by shutting the vehicle off and powering the system down for at least three minutes. Engineering is investigating, monitor OASIS for updates.
SSM 477412019-03-04. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA; BACK OVER PREVENTION. Some 2019 Mustang, Continental, Fusion, MKZ, F150, Edge or Nautilus with SYNC 3 may have a symptom of a rear view camera that remain on the screen when moving forward above 5MPH or a solid blue screen once the vehicle is at cruising speed. Some vehicles may experience inoperative infotainment applications such as Apple CarPlay. To eliminate these symptoms from occurring, it is recommended to disable the Wi-Fi in the settings menu by selecting Automatic updates. Shut off system WIFI and then disable automatic updates. If the vehicle is stuck in the rear camera state you can exit this state by shutting the vehicle off and powering the system down for at least three minutes. Engineering is investigating, monitor OASIS for updates.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.